iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 228:2025/oA101:2025

Automotive fuels - Unleaded petrol - Requirements and test methods

Automotive fuels - Unleaded petrol - Requirements and test methods

Goriva za motorna vozila - Neosvinčeni motorni bencini - Zahteve in preskusne metode

General Information

Status
Not Published
Public Enquiry End Date
30-Oct-2025
ICS
75.160.20 - Liquid fuels
Technical Committee
NAD - Petroleum products, lubricants and related products
Current Stage
7140 - Izvirni SIST - Javna obravnava (Local Project)
Start Date
21-Aug-2025
Due Date
26-Aug-2025
Directive
2011-01-3239 - Pravilnik o monitoringu fizikalno-kemijskih lastnosti tekočih goriv
Ref Project

Relations

Revises
SIST EN 228:2012+A1:2017/A101:2018 - Automotive fuels - Unleaded petrol - Requirements and test methods
Effective Date
01-Oct-2025
EN 228:2025/oA101:2025EN 228:2025/oA101:2025
PreviousNext
Draft
EN 228:2025/oA101:2025
Slovenian language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SL O V EN S K I  SIST EN 228:2025/oA101

S T ANDAR D
oktober 2025
Goriva za motorna vozila – Neosvinčeni motorni bencini –

Zahteve in preskusne metode – Dopolnilo A101

Automotive fuels – Unleaded petrol – Requirements and test methods

Carburants pour automobiles – Essence sans plomb –

Exigences et méthodes d'essai
Kraftstoffe für Kraftfahrzeuge – Unverbleite Ottokraftstoffe –
Anforderungen und Prüfverfahren

Referenčna oznaka
ICS 75.160.20 SIST EN 228:2025/oA101:2025 (sl)

Nadaljevanje na straneh od 2 do 6

© 2025-10. Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 228:2025/oA101 : 2025
NACIONALNI UVOD
Dopolnilo SIST EN 228:2025/A101:2025 (sl), Goriva za motorna vozila – Neosvinčeni motorni bencini –
Zahteve in preskusne metode – Dopolnilo A101, 2025, ima status slovenskega dopolnila k standardu
SIST EN 228:2025.
NACIONALNI PREDGOVOR
Slovensko dopolnilo k standardu SIST EN 228:2025/A101:2025 je pripravil tehnični odbor SIST/TC NAD
Naftni proizvodi, maziva in sorodni proizvodi.

Odločitev za izdajo tega dokumenta je dne 29. avgusta 2025 sprejel SIST/TC NAD Naftni proizvodi,
maziva in sorodni proizvodi.
ZVEZA Z NACIONALNIMI STANDARDI
SIST EN 228:2025 Goriva za motorna vozila – Neosvinčeni motorni bencini – Zahteve in
preskusne metode
OPOMBA
– Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.

SIST EN 228:2025/oA101 : 2025
Dopolnilo A101
1 Vzorčenje
Vzorčenje mora potekati po postopku, opisanem v SIST EN ISO 3170, SIST EN ISO 3171 ali SIST EN
14275.
2 Poimenovanje goriva
Za neosvinčene motorne bencine po standardu SIST EN 228 je dovoljena uporaba naslednjih nazivov:
‒ za motorni bencin 95 oktanov: neosvinčeni motorni bencin SIST EN 228 – RON 95,
‒ za motorni bencin 98 oktanov: neosvinčeni motorni bencin SIST EN 228 – RON 98,
‒ za motorni bencin 100 oktanov: neosvinčeni motorni bencin SIST EN 228 – RON 100.

Za namen označevanja je dovoljena tudi uporaba naslednjih nazivov:
‒ za motorni bencin 95 oktanov: NMB 95, MOTORNI BENCIN 95, NEOSVINČENI MOTORNI
BENCIN 95, BENCIN 95,
‒ za motorni bencin 98 oktanov: NMB 98, MOTORNI BENCIN 98, NEOSVINČENI MOTORNI
BENCIN 98, BENCIN 98,
‒ za motorni bencin 100 oktanov: NMB 100, MOTORNI BENCIN 100, NEOSVINČENI MOTORNI
BENCIN 100, BENCIN 100.
3 Označevanje goriva – identifikacijske oznake

Skladno s standardom SIST EN 16942 se motorni bencini po tem standardu označujejo z enotno
identifikacijsko oznako za motorne bencine. Z njo morajo biti označena:
‒ vsa polnilna mesta na javnih oskrbnih mestih z motornimi bencini (oznaka na ohišju polnilnega
sklopa ter na vsaki točilni pipi),
‒ mesta za polnjenje goriva na vozilih (v neposredni bližini polnilne odprtine),
‒ navodila za uporabo vozila ne glede na obliko, v kakršni so na voljo uporabniku (tiskani, elektronski
ipd.),
‒ prodajna mesta za vozila, kjer se označuje tip uporabljenega goriva.

3.1 Dimenzije in videz identifikacijskih oznak

Oblika identifikacijske oznake za motorne bencine je krog, v katerem je označena največja dovoljena
vsebnost etanola.
Najmanjše dimenzije oznake so:
‒ za označevanje točilne pipe in odprtine za polnjenje na vozilu ter v navodilih za uporabo vozila:
premer kroga mora biti vsaj 13 mm, debelina krožnega roba pa vsaj 1,4 točke;
‒ za označevanje oskrbnih mest (na ohišju polnilnega agregata) in za označevanje goriva pri
distributerjih vozil: premer kroga mora biti vsaj 30 mm, debelina krožnega roba pa vsaj 3,2 točke.

Vsebina izpisa znotraj identifikacijske oznake mora biti izpisana v pisavi »ArialBold«. Najmanjša velikost
pisave je 14. Velikost pisave se pri uporabi kroga z večjo dimenzijo temu primerno sorazmerno
povečuje/prilagaja. Napis mora biti nameščen centrično znotraj kroga.
SIST EN 228:2025/oA101 : 2025
Robovi in vsebina grafične identifikacijske oznake morajo biti izvedeni v črni barvi, notr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 228:2025(Main)
Automotive fuels - Unleaded petrol - Requirements and test methods
EN 228:2025

This document specifies requirements and test methods for marketed and delivered unleaded petrol. It is applicable to unleaded petrol for use in petrol engine vehicles designed to run on unleaded petrol.
This document specifies two types of unleaded petrol:
-   one type with a maximum oxygen content of 3,7 % (m/m) and a maximum ethanol content of 10,0 % (V/V) in Table 1;
-   one type in Table 2 with a maximum oxygen content of 2,7 % (m/m) and a maximum ethanol content of 5,0 % (V/V) intended for older vehicles that are not warranted to use unleaded petrol defined in Table 1.
NOTE 1   The two types are based on European Directive requirements [3], [4] and [13].
NOTE 2   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction, µ, and the volume fraction, φ.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 590:2025(Main)
Automotive fuels - Diesel - Requirements and test methods
EN 590:2025

This document specifies requirements and test methods for marketed and delivered automotive diesel fuel. It is applicable to automotive diesel fuel for use in diesel engine vehicles designed to run on automotive diesel fuel containing up to 7,0 %(V/V) fatty acid methyl ester (FAME).
NOTE   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16997:2025(Main)
Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
EN 16997:2025

This document specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content in ethanol (E85) automotive fuel [3], containing ethanol between 50 % (V/V) and 85 % (V/V), from 5 mg/kg to 20 mg/kg, using instruments with either monochromatic or polychromatic excitation.
NOTE 1   Sulfur contents higher than 20 mg/kg can be determined after sample dilution with an appropriate solvent. However, the precision was not established for diluted samples.
NOTE 2   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction (µ) and the volume fraction (φ) of a material respectively.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16389:2025(Main)
Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination
CEN/TR 16389:2025

This document explains the requirements and test methods for paraffinic diesel fuel from synthesis or hydrotreatment. Synthesis refers to XTL processes where X refers to various feedstocks for example Gas (G), Biomass (B) or Coal (C) and TL stands for To-Liquid. Hydrotreatment of vegetable oils and animal fats yield Hydrotreated Vegetable Oil (HVO). Paraffinic diesel fuel can be blended with up to 7,0 % (V/V) fatty acid methyl ester (FAME). This document provides background information to the final text of EN 15940 [1] and gives guidance and explanations to the producers, blenders, marketers and users of paraffinic automotive diesel fuel.
Paraffinic diesel fuel is a high quality, clean burning fuel with virtually no sulfur and aromatics. Paraffinic diesel fuel can be used in diesel engines, also to reduce regulated emissions. In order to have the greatest possible emissions reduction, a specific calibration is needed. Some types of paraffinic diesel fuel, at present notably HVO, can also offer a meaningful contribution to the target of increased non-crude derived and/or renewable content in the transportation fuel pool.
For general diesel engine operation, durability and warranty, paraffinic automotive diesel fuel needs a validation step to confirm the compatibility of the fuel with the vehicle, which for some existing engines still needs to be done. The vehicle manufacturer needs to be consulted before use.
NOTE 1   This document is directly related to EN 15940 and will be updated once further publications take place.
NOTE 2   Paraffinic diesel fuel is also used as a blending component in automotive diesel fuel. In that case, composition and properties of the final blends are defined by relevant fuel specification standards.
NOTE 3   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction and the volume fraction.

  • Technical report
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15751:2025(Main)
Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method at 110 °C
EN 15751:2025

This document specifies a test method for the determination of the oxidation stability of fuels for diesel engines at 110 °C, by means of measuring the induction period of the fuel up to 48 h. The method is applicable to fatty acid methyl esters (FAME) intended for the use as pure biofuel or as a blending component for diesel fuels, and to blends of FAME with diesel fuel containing 2 % (V/V) of FAME at minimum.
The precision of the test method has been developed for conventional diesel. This test method is applicable for paraffinic diesel fuels as specified in EN 15940, however, a separate precision statement for paraffinic diesel is not available.
NOTE 1   EN 14112 [1] describes a similar test method for the determination of the oxidation stability of pure fatty acid methyl esters (see the Introduction to this document). Additionally, EN 16568 [4] describes a similar test method for the determination of the oxidation stability of fuels for diesel engines at 120 °C, by means of measuring the induction period of the fuel up to 20 h. EN 16568 is applicable to blends of FAME with diesel fuel containing 2 % (V/V) of FAME at minimum. Other alternative test methods for the determination of the oxidation stability of distillate fuels are described in CEN/TR 17225 [5].
NOTE 2   For induction periods higher than 48 h the precision is not covered by the precision statement of this method. The limit values of the relevant fuel standards are well within the scope of this test method.
NOTE 3   The presence of cetane improver can reduce the oxidation stability determined by this test method. Limited studies with EHN (2-ethyl hexyl nitrate) indicated, however, that the stability is reduced to an extent which is within the reproducibility of the test method.
NOTE 4   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction (φ) of a material.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13016-3:2025(Main)
Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method)
EN 13016-3:2025

This document specifies a method for the determination of the vapour pressure, exerted in vacuo, by volatile, low viscosity petroleum products, components, ethanol blends up to 85 % (V/V), and feedstocks using a variable volume chamber. A dry vapour pressure equivalent (DVPE) is calculated from the vapour pressure.
The conditions used in the test described in this document are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 °C.
The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample.
This procedure calculates the partial pressure of the air dissolved in the test portion during the triple expansion process. It is suitable for samples with a DVPE between 15,7 kPa and 97,6 kPa; vapour pressures outside this range can be measured but the precision has not been determined.
This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant Council Directive 85/536/EEC [6], and for ethanol-fuel blends up to 85 % (V/V) ethanol.
NOTE   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent the mass and volume fractions respectively.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and to determine the applicability of any further restrictions for this purpose.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 18169:2025(Main)
Petroleum and related products — Alternative fuels and fuel blending components assessment guide — Information to producers and blenders of automotive fuels
CEN/TR 18169:2025

This document presents information to producers and blenders of automotive fuels. It allows the user to assess new products or blends and their production processes to determine what information is helpful to consider:
-   the applicable fuel specification standard(s);
-   the ‘workmanship clause’ cited by CEN fuel specifications;
-   the impact on vehicle emissions systems, material compatibility and vehicle operability;
-   the correct functioning of the intended product (fitness for purpose).
This document is a collection of information. It serves as guidance and cannot be considered as a product approval paper in any way.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17867:2023+A1:2025(Main + Amendment)
Petrol fuel for small internal combustion engines - Requirements and test methods
EN 17867:2023+A1:2025

This document specifies requirements on petrol fuel for use as fuel in small engines, together with the methods to be applied for testing these properties.
This document specifies requirements for two types of petrol fuel having low aromatics and sulfur content:
- one type for use in four-stroke engines with separate lubrication; and
- one mixed petrol fuel type for use in mixture-lubricated engines.
Testing the properties of the added engine oil is out of the scope of this document.
NOTE For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15491:2025(Main)
Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
EN 15491:2025

This document specifies a method for determining the total acidity, calculated as acetic acid, of ethanol to be used in petrol blends. It is applicable to ethanol having total acid contents of between 0,003 % (m/m) and 0,015 % (m/m).
NOTE   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction and the volume fraction, respectively.
WARNING - Use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to take appropriate measures to ensure the safety and health of personnel prior to the application of the document, and to fulfil statutory and regulatory restrictions for this purpose.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22854:2025(Main)
Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2025)
EN ISO 22854:2025

This document specifies the gas chromatographic (GC) method for the determination of saturated, olefinic and aromatic hydrocarbons in automotive motor gasoline, small engine petrol and ethanol (E85) automotive fuel. Additionally, the benzene and toluene content, oxygenated compounds and the total oxygen content can be determined.
Although specifically developed for the analysis of automotive motor gasoline that contains oxygenates, this test method can also be applied to other hydrocarbon streams having similar boiling ranges, such as naphthas and reformates.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day