oSIST prEN 17066-2:2024
(Main)Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 2: Equipment
Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 2: Equipment
The document applies to thermally insulated means of transport used for temperature sensitive goods equipped with a cooling and/or heating device.
This document specifies the terminology, the requirements for thermal insulation, air tightness, dimensioning of equipment with cooling and/or heating device for long distance and distribution transport.
This document does not specify further land transport requirements with regard to dimensions, weights, etc. Further this standard does not cover safety requirements or special requirements for thermal containers covered by ISO 1496-2.
Wärmegedämmte Transportmittel für temperaturempfindliche Produkte - Anforderungen und Prüfung - Teil 2: Einrichtungen
Dieses Dokument gilt für alle wärmegedämmten Transportmittel mit oder ohne Kühl- und/oder Heizeinrichtung, die für temperaturempfindliche Produkte verwendet werden.
Dieses Dokument legt die Terminologie, die Anforderungen an die Wärmedämmung, die Luftdichtheit und die Maße der Einrichtung mit Kühl- und/oder Heizeinrichtung für Fernverkehrs- und Verteilertransporte fest.
Dieses Dokument gibt keine weiteren Anforderungen an den Landtransport hinsichtlich der Maße, Gewichte usw. an. Dieses Dokument befasst sich außerdem nicht mit Sicherheitsanforderungen oder Sonderanforderungen für thermische Container, die durch ISO 1496-2 abgedeckt werden.
Moyens de transport isothermes pour les marchandises sensibles à la température - Exigences et essais - Partie 2 : Equipement
Le document s'applique aux moyens de transport isothermes utilisés pour les marchandises sensibles à la température et équipés d'un dispositif de réfrigération et/ou de chauffage.
Le présent document spécifie la terminologie, les exigences en matière d'isolation thermique, d'étanchéité à l'air et de dimensionnement de l'équipement doté d'un dispositif de réfrigération et/ou de chauffage pour le transport longue distance et la distribution.
Le présent document ne spécifie pas d'exigences supplémentaires en matière de transport terrestre relatives aux dimensions, au poids, etc. En outre, la présente norme ne couvre pas les exigences de sécurité ou les exigences spéciales pour les conteneurs à caractéristiques thermiques couverts par l’ISO 1496-2.
Izolirana prevozna sredstva za prevoz temperaturno občutljivega blaga - Zahteve in preskušanje - 2. del: Oprema
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17066-2:2024
01-februar-2024
Izolirana prevozna sredstva za prevoz temperaturno občutljivega blaga - Zahteve
in preskušanje - 2. del: Oprema
Insulated means of transport for temperature sensitive goods - Requirements and testing
- Part 2: Equipment
Wärmegedämmte Transportmittel für temperaturempfindliche Produkte - Anforderungen
und Prüfung - Teil 2: Einrichtungen
Moyens de transport isothermes pour les marchandises sensibles à la température -
Exigences et essais - Partie 2 : Equipement
Ta slovenski standard je istoveten z: prEN 17066-2
ICS:
27.200 Hladilna tehnologija Refrigerating technology
55.180.10 Večnamenski kontejnerji General purpose containers
oSIST prEN 17066-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17066-2:2024
---------------------- Page: 2 ----------------------
oSIST prEN 17066-2:2024
DRAFT
EUROPEAN STANDARD
prEN 17066-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2023
ICS 55.180.10; 27.200
English Version
Insulated means of transport for temperature sensitive
goods - Requirements and testing - Part 2: Equipment
Moyens de transport isothermes pour les Wärmegedämmte Transportmittel für
marchandises sensibles à la température - Exigences et temperaturempfindliche Produkte - Anforderungen
essais - Partie 2 : Equipement und Prüfung - Teil 2: Einrichtungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 413.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17066-2:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17066-2:2024
prEN 17066-2:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
3.1 General. 4
3.2 Equipment . 5
3.3 Testing . 6
4 Requirements for equipment . 7
4.1 General (user instructions and limits) . 7
4.2 Non-mechanically refrigerated and/or heated equipment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.