Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution

This European Standard specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697-1 or EN 12697-39.
The applicability of this European Standard is described in the product standards for bituminous mixtures.
NOTE   Fibres, solid (non-soluble during extraction) additives and (some) binder modifiers influence the test result.

Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung

Diese Europäische Norm legt ein Verfahren für die Bestimmung der Korngrößenverteilung der Gesteinskörnungen in Asphalt mittels Siebanalyse fest. Die Prüfung ist für Gesteinskörnungen, die nach Extraktion des Bindemittels nach EN 12697-1 oder EN 12697-39 rückgewonnen wurden, anwendbar.
Die Anwendbarkeit dieser Europäischen Norm ist in den Produktnormen für Asphalt beschrieben.
ANMERKUNG   Fasern, feste Zusatzstoffe (die bei der Extraktion nicht in Lösung gehen) und (einige) Modifizierungs¬mittel für Bindemittel beeinflussen das Prüfergebnis.

Mélanges bitumineux - Méthodes d'essai - Partie 2 : Granulométrie

La présente Norme européenne spécifie un mode opératoire pour la détermination de la composition granulométrique des granulats dans les mélanges bitumineux, par tamisage. L'essai s'applique aux granulats récupérés après extraction du liant selon l'EN 12697-1 ou l'EN 12697-39.
L'applicabilité de la présente Norme européenne est décrite dans les normes de produits relatives aux mélanges bitumineux.
NOTE   Les fibres, additifs solides (non solubles durant l'extraction) et (certains) modificateurs de liants influencent le résultat de l'essai.

Bitumenske zmesi - Preskusne metode - 2. del: Ugotavljanje zrnavosti

General Information

Status
Published
Publication Date
01-Sep-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Aug-2019
Due Date
26-Oct-2019
Completion Date
02-Sep-2019

Relations

Buy Standard

Standard
EN 12697-2:2015+A1:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12697-2:2015+A1:2019
01-oktober-2019
Nadomešča:
SIST EN 12697-2:2015
Bitumenske zmesi - Preskusne metode - 2. del: Ugotavljanje zrnavosti
Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung
Mélanges bitumineux - Méthodes d'essai - Partie 2 : Granulométrie
Ta slovenski standard je istoveten z: EN 12697-2:2015+A1:2019
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 12697-2:2015+A1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12697-2:2015+A1:2019

---------------------- Page: 2 ----------------------
SIST EN 12697-2:2015+A1:2019


EN 12697-2:2015+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2019
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 12697-2:2015
English Version

Bituminous mixtures - Test methods - Part 2:
Determination of particle size distribution
Mélanges bitumineux - Méthodes d'essai - Partie 2 : Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung
Granulométrie
This European Standard was approved by CEN on 19 March 2015 and includes Amendment 1 approved by CEN on 6 November
2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-2:2015+A1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12697-2:2015+A1:2019
EN 12697-2:2015+A1:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Significance and use . 4
5 Principle . 5
6 Apparatus . 5
7 Sample preparation . 5
8 Procedure. 5
9 Calculation . 6
10 Report . 6
11 Precision . 6
Bibliography . 8

2

---------------------- Page: 4 ----------------------
SIST EN 12697-2:2015+A1:2019
EN 12697-2:2015+A1:2019 (E)
European foreword
This document (EN 12697-2:2015+A1:2019) has been prepared by Technical Committee CEN/TC 227
“Road materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2020 and conflicting national standards shall
be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document includes Amendment 1 approved by CEN on 6 November 2018.
The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ".
This document supersedes !EN 12697-2:2015".
!The significant changes made in EN 12697-2:2015+A1:2019 compared to EN 12697-2:2015 are:
— [title] the series title no longer makes the method exclusively for hot mix asphalt;
— [European foreword] the list of significant changes is updated and the list of standards of the
EN 12697 series is replaced with a general reference to the CEN website."
!A list of all parts in the EN 12697 series can be found on the CEN website."
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.

3

---------------------- Page: 5 ----------------------
SIST EN 12697-2:2015+A1:2019
EN 12697-2:2015+A1:2019 (E)
1 Scope
This European Standard specifies a procedure for the determination of the particle size distribution of
the aggregates of bituminous mix
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.