SIST EN 1324:2007

Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives

This European Standard specifies the test method for the determination of the shear adhesion strength of dispersion ceramic tile adhesives.
This European Standard applies to all dispersion ceramic tile adhesives for internal tile installations on walls and floors.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit von Dispersionsklebstoffen

Diese Europäische Norm legt das Prüfverfahren fest, das zur Bestimmung der Haftscherfestigkeit von Dispersionsklebstoffen für keramische Fliesen und Platten anzuwenden ist.
Diese Europäische Norm gilt für alle Dispersionsklebstoffe für die Verarbeitung von keramischen Fliesen und Platten an Wänden und Böden im Innenbereich.
In dieser Europäischen Norm sind keine Leistungsanforderungen oder Empfehlungen für die Ausführung und Verarbeitung von keramischen Fliesen und Platten enthalten.
ANMERKUNG   Mörtel und Klebstoffe für keramische Fliesen und Platten können auch für andere Arten von Fliesen und Platten (Naturwerkstein, Betonwerkstein usw.) verwendet werden, wenn diese Materialien hierdurch nicht beeinträchtigt werden.

Adhésifs pour carrelage - Détermination de l'adhérence par cisaillement d'un adhésif en dispersion

La présente Norme européenne spécifie la méthode d’essai devant être utilisée pour déterminer l’adhérence par cisaillement des adhésifs en dispersion pour carrelage.
La présente Norme européenne s’applique à touts les adhésifs en dispersion pour carreaux céramiques destinés à la pose intérieure sur les murs et les sols.
La présente Norme européenne ne contient pas d’exigences de performance, ni de recommandations pour la conception et la pose du carrelage.
NOTE   Les adhésifs pour carreaux céramiques peuvent également être utilisées pour d’autres types de carrelages (carreaux de pierres naturelles ou de pierres reconstituées etc.) lorsqu’elles sont compatibles.

Lepila za ploščice - Ugotavljanje strižne adhezijske trdnosti disperzijskih lepil

General Information

• Status: Withdrawn
• Publication Date: 01-Jul-2007
• Withdrawal Date: 03-Apr-2017
• ICS: 83.180 - Adhesives
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: IKER - Ceramics
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Apr-2017
• Due Date: 27-Apr-2017
• Completion Date: 04-Apr-2017
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Ref Project: EN 1324:2007 - Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives

Relations

• Replaces: SIST EN 1324:1998/A1:2000 - Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives
• Effective Date: 01-Nov-2007
• Replaces: SIST EN 1324:1998 - Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives
• Effective Date: 01-Nov-2007
• Replaced By: SIST EN 12004-2:2017 - Adhesives for tiles - Part 2: Test methods
• Effective Date: 01-May-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesivesAdhésifs pour carrelage - Détermination de l'adhérence par cisaillement d'un adhésif en dispersionMörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit von DispersionsklebstoffenTa slovenski standard je istoveten z:EN 1324:2007SIST EN 1324:2007en,de91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:SIST EN 1324:1998/A1:2000SIST EN 1324:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1324:200701-december-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1324August 2007ICS 83.180; 91.100.10Supersedes EN 1324:1996
English VersionAdhesives for tiles - Determination of shear adhesion strength ofdispersion adhesivesAdhésifs pour carrelage - Détermination de l'adhérence parcisaillement d'un adhésif en dispersionMörtel und Klebstoffe für Fliesen und Platten - Bestimmungder Haftfestigkeit von DispersionsklebstoffenThis European Standard was approved by CEN on 21 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1324:2007: E



EN 1324:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Sampling.4 4 Test conditions.4 5 Test materials.4 5.1 General.4 5.2 Ceramic tiles.4 6 Apparatus.5 6.1 Template.5 6.2 Spacers.5 6.3 Weight.5 6.4 Loading machine.5 6.5 Shear test jig.6 6.6 Air circulating oven.6 7 Procedure.8 7.1 Preparation of test units.8 7.2 Initial shear adhesion strength.9 7.3 Adhesion strength after water immersion.10 7.4 Shear adhesion strength after heat ageing.10 7.5 Adhesion at elevated temperature.10 8 Evaluation and expression of results.10 9 Test report.10



EN 1324:2007 (E) 3 Foreword This document (EN 1324:2007) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. This document supersedes EN 1324:1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 1324:2007 (E) 4
1 S
...