Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing

This European Standard specifies a method for determining the resistance to shearing of joints between two adjacent sheets of the same plastic or rubber sheets for roof waterproofing.
NOTE The shearing characteristics of a joint between two widths of plastic or rubber sheets vary considerably depending on the material, method of jointing, the size of the overlap and the workmanship.

Abdichtungsbahnen - Bestimmung des Scherwiderstandes der Fügenähte - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Scherwiderstands der Fügenähte zwischen zwei benachbarten Dachabdichtungsbahnen fest, die aus dem gleichen Kunststoff oder Elastomer bestehen.
ANMERKUNG   Die Scherkennwerte einer Fügenaht zwischen zwei Kunststoff  oder Elastomerbahnen unterscheiden sich merklich in Abhängigkeit von Werkstoff, Fügeverfahren, Größe der Überlappung und Art der Arbeitsausführung.

Feuilles souples d'étanchéité - Détermination de la résistance au cisaillement des joints - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères

La présente Norme européenne décrit une méthode pour la détermination de la résistance au cisaillement des
joints formés entre deux feuilles attenantes, constituées du même type de feuilles plastiques ou élastomères
pour l'étanchéité de toiture.
NOTE Les caractéristiques de cisaillement d’un joint entre deux feuilles plastiques ou élastomères varient de
manière considérable selon le matériau, la méthode de jonction utilisée, les dimensions du recouvrement et la main
d'oeuvre.

Hidroizolacijski trakovi - Določevanje strižne trdnosti spojev - 2. del: Polimerni in elastomerni trakovi za tesnjenje streh

Ta evropski standard določa metodo za določevanje odpornosti proti rezanju spojev med dvema sosednjima trakovoma enakih polimernih ali elastomernih trakov za tesnjenje streh.

General Information

Status
Published
Public Enquiry End Date
14-Sep-2009
Publication Date
14-Sep-2010
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Jul-2010
Due Date
20-Sep-2010
Completion Date
15-Sep-2010

Relations

Buy Standard

Standard
EN 12317-2:2010
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bestimmung des Scherwiderstandes der Fügenähte - Teil 2: Kunststoff- und Elastomerbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination de la résistance au cisaillement des joints - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomèresFlexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 12317-2:2010SIST EN 12317-2:2010en,fr,de01-oktober-2010SIST EN 12317-2:2010SLOVENSKI
STANDARDSIST EN 12317-2:20011DGRPHãþD



SIST EN 12317-2:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12317-2
July 2010 ICS 91.100.50 English Version
Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
Feuilles souples d'étanchéité - Détermination de la résistance au cisaillement des joints - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères
Abdichtungsbahnen - Bestimmung des Scherwiderstandes der Fügenähte - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen This European Standard was approved by CEN on 29 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12317-2:2010: ESIST EN 12317-2:2010



EN 12317-2:2010 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Principle .55 Apparatus .56 Sampling .67 Preparation of test pieces and test specimens .68 Procedure .79 Expression of results .79.1 Jointing information .79.2 Evaluation .79.3 Precision of the test method .710 Test report .7Annex A (informative)
Failure modes .9 SIST EN 12317-2:2010



EN 12317-2:2010 (E) 3 Foreword This document (EN 12317-2:2010) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at the latest by January 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12317-2:2000. This European Standard “Flexible sheets for waterproofing - Determination of shear resistance of joints” consists of two parts: - Part 1: Bitumen sheets for roof waterproofing; - Part 2: Plastic and rubber sheets for waterproofing. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.