oSIST prEN IEC 60335-2-48:2026/oprAA:2026
(Amendment)Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
- Abstract
This European Standard deals with the safety of electrically operated commercial grillers and toasters not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. Rotary or continuous grillers and toasters and similar appliances intended for grilling by radiant heat such as rotisseries, salamanders, etc. are within the scope of this standard. Appliances within the scope of this standard are typically used in restaurants, canteens, hospitals and commercial enterprises such as bakeries, butcheries, etc.
- Status
- Not Published
- Public Enquiry End Date
- 17-Sep-2026
- Technical Committee
- VGA - Safety of household and similar electrical appliances
- Current Stage
- 4020 - Public enquire (PE) (Adopted Project)
- Start Date
- 09-Jul-2026
- Due Date
- 26-Nov-2026
- Completion Date
- 28-Sep-2026
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 is a CENELEC draft amendment to the European standard for the safety of commercial electric grillers and toasters. It applies to electrically operated appliances not intended for household use, including rotary or continuous grillers and other radiant-heat appliances such as rotisseries and salamanders. The amendment adds and modifies requirements for design, marking, instructions, testing, hygiene, ergonomics and power-driven moving parts for manufacturers, test labs and conformity teams.
What does oSIST prEN IEC 60335-2-48:2026/oprAA:2026 specify?
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 specifies additional safety requirements for commercial electric grillers and toasters. It is a draft amendment to the Part 2 standard and is read together with prEN IEC 60335-2-48:2026 and prEN IEC 60335-2-48:2026/prA1:2026.
The scope covers appliances with a rated voltage of up to 250 V for single-phase appliances connected between one phase and neutral, and up to 480 V for other appliances. It also covers similar radiant-heat appliances used for grilling, and it is aimed at equipment used in places such as restaurants, canteens, hospitals, bakeries and butcheries.
A key exclusion added in the scope is gas, oil or solid fuel burning appliances. The document also treats appliances with radio function, remote communication and remote operation, and it uses the terms “radio appliance” and “appliance” with the meanings given in the text.
The amendment is organized as modifications to the Introduction and Clauses 1, 2, 3, 5, 7, 8, 11, 15, 18, 19, 20, 22, 25 and 29, followed by updated annexes and bibliography.
| Annex | What it covers |
|---|---|
| ZA | Normative references to international publications and their European publications |
| ZE | Additional requirements for appliances with power driven moving parts |
| ZAA | Hygiene requirements |
| ZZA | Relationship with Directive 2014/35/EU |
| ZZB | Relationship with Regulation (EU) 2023/1230 |
| ZZC | Relationship with Directive 2014/53/EU |
What are the key requirements of oSIST prEN IEC 60335-2-48:2026/oprAA:2026?
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 focuses on safe use, clear instructions, mechanical hazards, hygiene and ergonomic layout. In practice, it tells manufacturers what to design, what to declare in the instructions, and which checks apply during conformity assessment.
Test conditions and operating assumptions
Clause 5.5 sets the basic test condition for many checks: the appliance is operated with no load, user controls are set to maximum, timers are made inoperative, and any doors, lids, reflectors or drip trays are positioned as instructed. If the appliance cannot run without a load, the user instructions are followed instead. Motors are tested in the intended manner under the most severe normal-use conditions. This matters because safety testing has to reflect the worst credible operating state, not a convenient one.
Marking and instructions
Clause 7 strengthens the instructions for appliances intended for use in the area open to the public and for other appliances. The instructions must address use by persons with reduced physical, sensory or mental capabilities, supervision of children from 8 years old, supervision to keep children and domestic animals away from the appliance, and checks that no domestic animals are inside the cavity before use. It also requires advice on maintenance, training where needed, safe adjustment and servicing, stability during use and dismantling, response to accidents or breakdowns, personal protective equipment for spreading hot food, slippery floors and the maximum weight of the empty appliance.
Clause 7.12.1 adds a repair rule and a height requirement for table-top appliances: they need a support so the working height is between 695 mm and 980 mm. For practical use, this ties the appliance to a usable working posture and reduces handling risk.
Access, heating and stability
Clauses 8 and 20 both add the same condition for test probe 18: it is not applicable unless the appliance is intended to be installed in an area open to the public. Clause 15 and Clause 20 also update wording on stability and mechanical hazards, so the instructions or appliance marking must carry the relevant information.
Clause 18 of Part 1 is not applicable here. That means the amendment removes the generic Part 1 endurance clause and relies on the specific provisions in this Part 2 and its annexes.
Construction, hygiene and ergonomics
Clause 22 adds several practical construction rules. Lids must have at least one handle. The fluid category depends on whether the appliance has a cleaning system: category 2 without one and category 3 with one. The new ergonomic requirements call for controls that are clearly visible, easy to identify, within easy reach and protected against accidental actuation if that could create a hazard.
Clause 22.Z.102 and Annex ZAA add hygiene requirements. Compliance is checked by inspection and by Annex ZAA. In practice, this means the appliance design and the cleaning instructions must support hygienic use, cleaning and maintenance.
Power-driven moving parts
Annex ZE adds specific requirements for appliances and machines with power-driven moving parts. It includes instructions on noise, with an A-weighted emission sound pressure level stated as 70 dB(A) or less, and a guard endurance test that operates the guard for 5 000 cycles at 5 cycles per minute. This is important for moving guards and similar parts that can wear during repeated use.
What terms does oSIST prEN IEC 60335-2-48:2026/oprAA:2026 define?
- appliance - In this document, “appliance” is used with the same meaning as “equipment”, and where relevant it also includes “machine”.
- radio appliance - In the scope, “radio appliance” is used with the same meaning as “radio equipment”.
- installation wall - A fixed construction that contains supply facilities for wall-mounted appliances on one or both sides.
- food area - The part of the appliance used for food handling and processing, shown in Annex ZAA.
- splash area - The area around the food area that may be exposed to splashes and therefore needs cleanable surfaces.
- non-food area - The part of the appliance outside the food area and splash area, where food contact is not intended.
Who uses oSIST prEN IEC 60335-2-48:2026/oprAA:2026?
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 is used by manufacturers, design engineers, test laboratories, certification bodies, quality managers and buyers of commercial kitchen equipment. It is relevant when specifying, designing, testing or buying commercial grillers, toasters, rotisseries, salamanders and similar appliances.
It also matters to installers and service personnel because the instructions include support height, repair competence, safe adjustment, hygiene maintenance and user information. The intended application areas named in the scope are restaurants, canteens, hospitals, bakeries, butcheries and similar commercial enterprises.
What changed in oSIST prEN IEC 60335-2-48:2026/oprAA:2026 from the previous edition?
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 is a draft amendment that modifies prEN IEC 60335-2-48:2026 and prEN IEC 60335-2-48:2026/prA1:2026. The foreword lists these significant technical changes:
- requirements and instructions for children, People with disabilities and domestic animals
- requirements for power driven moving parts
- clarifications to the mechanical test set-up
- hygienic requirements
- ergonomic requirements
The document also notes that with European Amendment A11, EN 60335-2-48:2003+Cor1:2007+A1:2008+A11:2012+A2:2019+A12:2024 is superseded.
Which standards are used with oSIST prEN IEC 60335-2-48:2026/oprAA:2026?
- EN IEC 60335-1:2023 - the Part 1 general safety requirements that this Part 2 is used with.
- EN 1672-2:2020 - hygiene and cleanability requirements used in Annex ZAA.
- EN 61770:2009 - the fluid category reference used for appliances with or without a cleaning system.
- EN 61032 - the source of test probe B and test probe 18 used in access tests.
- EN 614-1 and EN 614-2 - ergonomic guidance cited in the note to Clause 22.Z.101.
- IEC 60584-1 and ISO 898-1 / ISO 3506-1 / ISO 3506-2 / ISO 3506-3 / ISO 3506-4 - normative references listed in Annex ZA for thermocouples and fasteners.
- EN IEC 60335-2-102 - cited in the scope as the standard for gas, oil and solid-fuel burning appliances with electrical connections, which are excluded here.
What does the oSIST prEN IEC 60335-2-48:2026/oprAA:2026 document contain?
The document contains clause-by-clause amendments to the Part 2 standard, plus European annexes prefixed Z. It gives specific test-condition instructions, access-probe conditions, construction rules, marking and instruction content, and hygiene-related design and information requirements.
It also contains Annex ZE for power-driven moving parts, Annex ZAA for hygiene, and the informative Annexes ZZA, ZZB and ZZC that map the standard to EU legislation. Annex ZAA includes Figure ZAA.1 for categorizing food areas, and the annexes to Part 1 include a table of normative references.
The document is designed for design verification, type testing, instruction review, hygiene assessment and conformity work.
Relations
- Effective Date
- 07-Apr-2025
Frequently Asked Questions
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters". This standard covers: This European Standard deals with the safety of electrically operated commercial grillers and toasters not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. Rotary or continuous grillers and toasters and similar appliances intended for grilling by radiant heat such as rotisseries, salamanders, etc. are within the scope of this standard. Appliances within the scope of this standard are typically used in restaurants, canteens, hospitals and commercial enterprises such as bakeries, butcheries, etc.
This European Standard deals with the safety of electrically operated commercial grillers and toasters not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. Rotary or continuous grillers and toasters and similar appliances intended for grilling by radiant heat such as rotisseries, salamanders, etc. are within the scope of this standard. Appliances within the scope of this standard are typically used in restaurants, canteens, hospitals and commercial enterprises such as bakeries, butcheries, etc.
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 is classified under the following ICS (International Classification for Standards) categories: 97.040.20 - Cooking ranges, working tables, ovens and similar appliances; 97.040.50 - Small kitchen appliances. The ICS classification helps identify the subject area and facilitates finding related standards.
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 has the following relationships with other standards: It is inter standard links to oSIST prEN IEC 60335-2-48:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU, 2014/53/EU, 2023/1230; Standardization Mandates: M/511, M/536, M/605. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
oSIST prEN IEC 60335-2-48:2026/oprAA:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2026
Gospodinjski in podobni električni aparati - Varnost - 2-48. del: Posebne zahteve
za komercialne električne žare in opekače - Dopolnilo AA
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements
for commercial electric grillers and toasters
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-48:
Besondere Anforderungen für elektrische Strahlungsgrillgeräte und Toaster für den
gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-48: Exigences
particulières pour les grils et grille-pain électriques à usage commercial
Ta slovenski standard je istoveten z: prEN IEC 60335-2-48:2026/prAA:2026
ICS:
97.040.20 Štedilniki, delovni pulti, Cooking ranges, working
pečice in podobni aparati tables, ovens and similar
appliances
oSIST prEN IEC 60335-2- en
48:2026/oprAA:2026
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-48:2026
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
July 2026
ICS 97.040.50 -
English Version
Household and similar electrical appliances - Safety - Part 2-48:
Particular requirements for commercial electric grillers and
toasters
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-48: Exigences particulières pour les grils et grille- ähnliche Zwecke - Teil 2-48: Besondere Anforderungen für
pain électriques à usage commercial elektrische Strahlungsgrillgeräte und Toaster für den
gewerblichen Gebrauch
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60335-2-48:2026; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2026-08-21.
It has been drawn up by CLC/TC 61.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81690 Ref. No. prEN IEC 60335-2-48:2026/prAA:2026 E
Contents Page
13 European foreword . 3
14 1 Modification to the Introduction . 4
15 2 Modification to Clause 1, “Scope” . 4
16 3 Modification to Clause 2, “Normative references” . 4
17 4 Modification to Clause 3, “Terms and definitions” . 5
18 5 Modification to Clause 5, “General conditions for the tests” . 5
19 6 Modification to Clause 7, “Marking and instructions” . 5
20 7 Modification to Clause 8, “Protection against access to live parts” . 6
21 8 Modification to Clause 11, “Heating”. 6
22 9 Modification to Clause 15, “Stability and mechanical hazards” . 7
23 10 Modification to Clause 18, “Endurance” . 7
24 11 Modification to Clause 19, “Abnormal operation” . 7
25 12 Modification to Clause 20, “Stability and mechanical hazards” . 7
26 13 Modification to Clause 22, “Construction” . 7
27 14 Modification to Clause 25, “Supply connection and external flexible cords” . 8
28 15 Modification to Clause 29, “Clearances, creepage distances and solid insulation” . 8
29 16 Modification to the annexes . 8
30 17 Modification to Bibliography . 20
31 European foreword
32 This document (prEN IEC 60335-2-48:2026/prAA:2026) has been prepared by CLC/TC 61 “Safety of household
33 and similar electrical appliances”.
34 This document is currently submitted to the Enquiry.
35 The following dates are proposed:
• latest date by which the existence of this (doa) dav + 6 months
document has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
36 This document will modify prEN IEC 60335-2-48:2026 and all its amendments and corrigenda (if any).
37 prEN IEC 60335-2-48:2026/prAA:2026 includes the following significant technical modifications:
38 — introduce requirements and instruction for children, People with disabilities and domestic animals;
39 — introduce requirements for power driven moving parts;
40 — introduce mechanical test set-up clarifications;
41 — introduce the hygienic requirements;
42 — introduce ergonomic requirements.
43 This document is read in conjunction with prEN IEC 60335-2-48:2026 and
44 prEN IEC 60335-2-48:2026/prA1:2026
45 The numbering system for European clauses, subclauses, notes, tables, figures and annexes that
46 are additional to those in the IEC standard are prefixed with the letter “Z”.
47 This document has been prepared under a standardization request addressed to CENELEC by the European
48 Commission. The Standing Committee of the EFTA State subsequently approves these requests for its Member
49 States.
50 For the relationship with EU legislation, see informative Annexes ZZA, ZZB and ZZC, which are an integral part
51 of this document.
52 Secretary’s note: The text contained in the Secretary’s notes will be removed from the standard before
53 publication, as it is provided solely to inform stakeholders about the reasons for introducing the European
54 common modifications.
55 Secretary’s Note: The above sentence in lines 53/54 will be removed when the BT approves the removal of
56 the link to legislation.
57 1 Modification to the Introduction
58 Delete the words “manufacturer's”.
59 2 Modification to Clause 1, “Scope”
60 Replace the fifth paragraph starting with “As far as is practicable…” with the following:
61 “This document deals with the reasonably foreseeable hazards of intended use presented by appliances and
62 machines, which are encountered by all persons and domestic animals in and around the installation place or
63 workplace.”
64 Convert the paragraph starting with “Attention is drawn to the…” into Note Z101.
65 Add the following list item in the paragraph starting with “This document does not apply to”:
66 “— gas, oil or solid fuel burning appliances (EN IEC 60335-2-102)”
67 Addition:
68 With European Amendment A11, EN 60335-2-48:2003+Cor1:2007+A1:2008+A11:2012+A2:2019+A12:2024 is
69 superseded.
70 This European Amendment A11 supplements or modifies the corresponding clauses of the standards below:
71 — EN IEC 60335-1:2023 (Part 1)
72 — EN IEC 60335-2-48:2026 (Part 2)
73 For the purpose of this document, the term “appliance” includes the term “machine” where applicable.
74 Additional requirements for appliances with power driven moving parts are given in Annex ZE.
75 This document does not deal with any specific requirements on noise emitted from these appliances the
76 generated noise is not considered to be a relevant hazard. Thus, the emission sound pressure level LpA is
77 considered to be LpA ≤ 70 dB(A).
78 This document contains requirements for appliances with radio function, remote communication, and remote
79 operation.
80 For the scope of this document, the term “radio appliance” is used with the same meaning of “radio equipment”.
81 For the scope of this document, the term “appliance” is used with the same meaning of “equipment”.
82 Compliance with this Part 2 when used together with the Part 1 provides one means of conformity with the
83 safety objectives as listed in Table ZZA.1, Table ZZB.1 and Table ZZC.1.
84 3 Modification to Clause 2, “Normative references”
85 Addition:
86 EN 1672-2:2020, Food processing machinery - Basic concepts - Part 2: Hygiene and cleanability requirements
87 EN IEC 60335-1:2023, Household and similar electrical appliances - Safety - Part 1: General requirements
As impacted by EN IEC 60335-1:2023/A11:2023 and EN IEC 60335-1:2023/prAB:2026.
As impacted by EN IEC 60335-2-48:2026/prA1:2026.
As impacted by EN IEC 60335-1:2023/A11:2023 and EN IEC 60335-1:2023/prAB:2026.
88 4 Modification to Clause 3, “Terms and definitions”
89 3.1.9 Replace “manufacturer's” with “user’s” (three times).
90 3.8.101 Replacement
91 installation wall
92 fixed construction containing supply facilities for wall mounted appliances on one or both sides
93 5 Modification to Clause 5, “General conditions for the tests”
94 5.5 Addition
95 Appliances are operated with no load and with any controls intended to be operated by the user set at the
96 maximum. Timers, if provided, are rendered inoperative.
97 If doors, lids, reflectors or drip trays are provided, they are arranged in accordance with the user's instructions.
98 If no instructions are given, doors are fully open, drip trays are put into the lowest and the grilling grid into the
99 highest possible position.
100 If the appliance cannot be operated without a load, then the user's instructions are taken into account.
101 Motors incorporated in the appliance are operated in the intended manner under the most severe conditions
102 that can be expected in normal use.
103 6 Modification to Clause 7, “Marking and instructions”
104 7.12 Modification
105 Replace the fourth paragraph starting with “This appliance is not intended for use by persons (including
106 children)…” with the following:
107 “For appliances intended to be used in the area open to the public, the instructions shall state the substance
108 of the following:
109 — This appliance may be used by persons with reduced physical, sensory or mental capabilities, or lack of
110 experience and knowledge, when they have been given supervision or instruction concerning use of the
111 appliance by a person responsible for their safety.
112 — This appliance may be used by children from the age 8 years if they are continuously supervised.
113 — Children and domestic animals should be supervised to ensure that they do not play with the appliance.
114 — Do not let cord hang over edge of table or counter when appliance is left unattended.
115 — Keep the appliance out of reach of domestic animals and children aged less than 8 years.
116 — Check that there are no domestic animals inside the compartment/cavity of the appliance before use.
117 — Cleaning and user maintenance shall not be carried out by children.
118 For other appliances, the instructions shall state the substance of the following:
119 — This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or
120 lack of experience and knowledge, unless they have been given supervision or instruction concerning use
121 of the appliance by a person responsible for their safety.”
122 In the addition, replace “The manufacturer shall declare” with “It shall be declared in the instructions”.
123 In the addition, add after “IEC 60417-5021 (2002-10)” the following: “, ISO 7000-0434A (2004-01)”.
124 In the addition, replace the sentence starting with “If the manufacturer wants.” with the following:
125 “If the intended use of the appliance shall be limited to less than the above, this shall be clearly stated in the
126 instructions.”
127 Delete the modification starting with “The instruction concerning persons (including children)…”.
128 Addition:
129 The instructions shall also state
130 — the intended use of the appliance as covered by the scope of this document;
131 — instructions regarding user maintenance and operation of the appliance and, if necessary, instructions for
132 the training of operators;
133 — instructions designed to enable adjustment and maintenance to be carried out safely, including the
134 protective measures that should be taken during these operations;
135 — the conditions under which the appliance is stable during use, dismantling when out of use, testing or
136 foreseeable breakdowns;
137 — the operating method to be followed in the event of accident or breakdown to prevent unsafe actions;
138 — information regarding the use of personal protection equipment in case of spreading hot food stuff;
139 — a warning concerning possible slippery floor adjacent to the appliance;
140 — the maximum weight of the empty appliance.
141 7.12.1 Modification
142 In the second paragraph of the addition starting with “the appliance shall be…”, replace “the rating of” with “the
143 rating and type of the”.
144 Add the following:
145 “The instructions shall state that any repairs shall be carried out by competent persons.
146 The instructions for table-top appliances shall state that a support is needed so that the working height of the
147 appliance is between 695 mm and 980 mm.”
148 7.101 Modification
149 Replace “by the manufacturer” with “with the appliance”.
150 7 Modification to Clause 8, “Protection against access to live parts”
151 8.1.1 Addition
152 Add in the third paragraph starting with “Test probe B and probe 18 of EN 61032 .“ the following:
153 “Test probe 18 is not applicable unless the appliance is intended to be installed in an area open to the public.”
154 8 Modification to Clause 11, “Heating”
155 11.2 Modification:
156 Delete “manufacturer’s”.
157 11.3 Modification:
158 Delete the sentence “Any measuring instrument giving the same results as the probe may be used.”.
159 11.7 Modification:
160 Replace “by the manufacturer” with “in the instruction”.
161 11.8 Modification:
162 In the second list item of footnote “a” of Table 102, replace “manufacturer’s” with “user’s”.
163 9 Modification to Clause 15, “Stability and mechanical hazards”
164 15.101 Replace “by the manufacturer” with “in the instruction or marked on the appliance”.
165 10 Modification to Clause 18, “Endurance”
166 Replace the text with “This clause of Part 1 is not applicable”.
167 11 Modification to Clause 19, “Abnormal operation”
168 19.1 Modification:
169 Replace “manufacturer's” with “user’s”.
170 12 Modification to Clause 20, “Stability and mechanical hazards”
171 20.1 Modification:
172 Replace “by the manufacturer” with “together with appliance” and replace “manufacturer's” with “user’s”.
173 20.2 Addition
174 In the second list item starting with “test probe 18 of EN 61032 .“, add the following:
175 “Test probe 18 is not applicable unless the appliance is intended to be installed in an area open to the public.”
176 13 Modification to Clause 22, “Construction”
177 22.13 Addition
178 Add the following after the first paragraph:
179 “Lids shall be equipped with at least one handle.”
180 22.48 Addition
181 Add the following after the first paragraph:
182 “For appliances within the scope of this document without cleaning system, Fluid Category is 2 according to
183 EN 61770:2009 .
184 For appliances within the scope of this document with cleaning system, Fluid Category is 3 according to
185 EN 61770:2009.”
186 Add the following new subclauses:
187 “
188 22.Z.101 Appliances shall meet the following ergonomic requirements:
189 — The working height of the appliance shall be between 695 and 980 mm (see also 7.12.1),
190 — Operator controls shall be:
As impacted by EN 61770:2009/AC:2011, EN 61770:2009/A11:2018, EN 61770:2009/A1:2019, EN
61770:2009/A12:2022, EN 61770:2009/AC:2023 and EN 61770:2009/A13:2026
191 — clearly visible and identifiable,
192 — positioned within easy reach of the operator's hand,
193 — secured against accidental actuation, if their actuation could result in a hazard.
194 Compliance is checked by inspection.
195 NOTE Guidance can be found in EN 614-1 and EN 614-2.
196 22.Z.102 Appliances shall meet hygiene requirements.
197 Compliance is checked by inspection and by the requirements of Annex ZAA.
198 14 Modification to Clause 25, “Supply connection and external flexible cords”
199 25.3 Modification:
200 Replace “manufacturer's” with “user’s”.
201 15 Modification to Clause 29, “Clearances, creepage distances and solid insulation”
202 29.2 Modification:
203 Replace “unlikely to be” with “not”.
204 16 Modification to the annexes
205 The annexes of Part 1 and Part 2 are applicable except as follows:
206 Annex ZA
207 (normative)
209 Normative references to international publications with their
210 corresponding European publications
Publication Year Title EN/HD Year
Addition:
IEC 60584-1 - Thermocouples – Part 1: EMF specifications and EN 60584-1 2013
tolerances
ISO 898-1 - Mechanical properties of fasteners made of EN ISO 898-1 2013
carbon steel and alloy steel – Part 1
...