Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances

Deals with the safety of electric warming plates, warming trays and similar appliances intended to keep food or vessels warm, for household and similar purposes, their rated voltage being not more than 250 V.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-12: Besondere Anforderungen für Warmhalteplatten und ähnliche Geräte

Appareils électrodomestiques et analogues - Sécurité - Partie 2-12: Règles particulières pour les chauffe-plats et appareils analogues

Gospodinjski in podobni električni aparati - Varnost - 2-12. del: Posebne zahteve za grelne plošče in podobne aparate - Dopolnilo A2

Obravnava varnost grelnih plošč, grelnih pladnjev in podobnih aparatov, ki so namenjeni za ogrevanje hrane ali posod, gospodinjsko in podobno uporabo ter katerih nazivna napetost ne presega 250 V.

General Information

Status
Published
Publication Date
15-Oct-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Oct-2019
Due Date
15-Dec-2019
Completion Date
16-Oct-2019

Overview

EN 60335-2-12:2003/A2:2019 is a CENELEC-adopted amendment (A2) to the European safety standard for warming plates and similar appliances. It supplements EN 60335-2-12:2003 and is to be read with EN 60335-1:2012 (Part 1). The amendment aligns with IEC 60335-2-12:2002/A2:2017 and supports conformity with the EU Low Voltage Directive (2014/35/EU). The standard specifies safety requirements, test methods and marking/instruction rules to reduce electrical and thermal hazards from warming plates, hotplates and related household appliances.

Key Topics

  • Scope and normative references: Clarifies applicability and adds reference to IEC 60584-1 (thermocouples).
  • Definitions: Introduces the term “hot functional surface” - a surface intentionally heated to perform the appliance’s function.
  • Marking and instructions:
    • Requires marking where footnote conditions apply, using the text “CAUTION: Hot surface” or symbol IEC 60417-5041.
    • Symbol requirements: triangle height at least 10 mm, explanation of meaning and location of hot areas in instructions, and visibility during normal operation.
  • Heating and temperature tests:
    • Adds measurement procedures (Figure 101 probe) for external surface temperature rise: a probe with a 5 mm tinned copper disc, thermocouple wires (IEC 60584-1 Type K), applied with a force of 4 N ± 1 N, contact time 30 s.
    • Specifies continuous monitoring during tests and refers to Table 101 for maximum permitted temperature rises of external accessible surfaces for different materials (metal, coated metal, glass/ceramic, plastics).
  • Safety exemptions: Details which surfaces are excluded from temperature limits (e.g., hot functional surfaces, handles, surfaces within specified clearances).

Applications

Who uses this standard and why:

  • Manufacturers and product designers: To design warming plates and hotplate appliances that meet European safety requirements and to specify thermal protection, insulation, and user warnings.
  • Test laboratories and conformity assessors: To perform standardized temperature-rise and marking tests (using the specified probe and thermocouple methods).
  • Regulatory bodies and notified bodies: For assessing conformity with the Low Voltage Directive and harmonized safety objectives.
  • Technical writers and compliance teams: To prepare required instructions, warnings, and product labeling (e.g., IEC 60417-5041).

Related Standards

  • EN 60335-1:2012 (Household appliances - General requirements)
  • IEC 60335-2-12:2002/A2:2017 (base international text)
  • IEC 60584-1 (Thermocouples - EMF specifications and tolerances)
  • IEC 60417-5041 (hot surface symbol)

Keywords: EN 60335-2-12:2003/A2:2019, warming plates safety, household appliances standard, temperature rise testing, hot surface marking, IEC 60335-2-12.

Amendment

SIST EN 60335-2-12:2003/A2:2019

English language
9 pages
Preview
Preview
e-Library read for
1 day

Frequently Asked Questions

SIST EN 60335-2-12:2003/A2:2019 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances". This standard covers: Deals with the safety of electric warming plates, warming trays and similar appliances intended to keep food or vessels warm, for household and similar purposes, their rated voltage being not more than 250 V.

Deals with the safety of electric warming plates, warming trays and similar appliances intended to keep food or vessels warm, for household and similar purposes, their rated voltage being not more than 250 V.

SIST EN 60335-2-12:2003/A2:2019 is classified under the following ICS (International Classification for Standards) categories: 13.120 - Domestic safety; 97.040.20 - Cooking ranges, working tables, ovens and similar appliances; 97.040.50 - Small kitchen appliances. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 60335-2-12:2003/A2:2019 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU, 2014/53/EU; Standardization Mandates: M/511. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN 60335-2-12:2003/A2:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2019
Gospodinjski in podobni električni aparati - Varnost - 2-12. del: Posebne zahteve
za grelne plošče in podobne aparate - Dopolnilo A2
Household and similar electrical appliances - Safety - Part 2-12: Particular requirements
for warming plates and similar appliances
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-12:
Besondere Anforderungen für Warmhalteplatten und ähnliche Geräte
Appareils électrodomestiques et analogues - Sécurité - Partie 2-12: Règles particulières
pour les chauffe-plats et appareils analogues
Ta slovenski standard je istoveten z: EN 60335-2-12:2003/A2:2019
ICS:
13.120 Varnost na domu Domestic safety
97.040.20 Štedilniki, delovni pulti, Cooking ranges, working
pečice in podobni aparati tables, ovens and similar
appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60335-2-12:2003/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2019
ICS 13.120; 97.040.50
English Version
Household and similar electrical appliances - Safety - Part 2-12:
Particular requirements for warming plates and similar
appliances
(IEC 60335-2-12:2002/A2:2017)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-12: Règles particulières pour les chauffe-plats et ähnliche Zwecke - Teil 2-12: Besondere Anforderungen für
appareils analogues Warmhalteplatten und ähnliche Geräte
(IEC 60335-2-12:2002/A2:2017) (IEC 60335-2-12:2002/A2:2017)
This amendment A2 modifies the European Standard EN 60335-2-12:2003; it was approved by CENELEC on 2017-11-21. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60335-2-12:2003/A2:2019 E

European foreword
The text of document 61/5313/CDV, future IEC 60335-2-12/A2, prepared by IEC/TC 61 "Safety of
household and similar electrical appliances" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60335-2-12:2003/A2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-02-02
level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-08-02
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
which is referred to in this text as “Part 1”.
This amendment supplements or modifies the corresponding clauses of EN 60335-1:2012 including its
amendments and EN 60335-2-12:2003
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s), see informative Annex ZZA.
Endorsement notice
The text of the International Standard IEC 60335-2-12:2002/A2:2017 was approved by CENELEC as a
European Standard without any modification.

Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications:
The annexes of part 1 are applicable except as follows:
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
This clause of Part 1 is applicable, with the following addition:
Publication Year Title EN/HD Year
IEC 60584-1 -  Thermocouples - Part 1: EMF specifications EN 60584-1 -
and tolerances
Annex ZZA
(informative)
Replace Annex ZZA in the part 1 by the following:
Relationship between this European Standard and the safety objectives of
Directive 2014/35/EU [2014 OJ L96] aimed to be covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive, compliance
with the normative clauses of this standard given in Table ZZA.1 confers, within the limits of the scope
of this standard, a presumption of conformity with the corresponding safety objectives of that Directive,
and associated EFTA regulations.
Compliance with this Part 2 when used together with the Part 1 provides one means of conformity with
the safety objectives.
Table ZZA.1 – Correspondence between this European Standard
and Annex I of Directive 2014/35/EU [2014 OJ L96]
Safety objectives of
Clause(s) / sub-clause(s) Remarks/
Directive
of this EN Notes
2014/35/EU
1 a) Clauses 4, 7 None
1 b) Clauses 4, 7 None
1 c) Clauses 4, 7 None
Clauses 6, 7, 8, 9, 10, 11, 13, 14, 15, 16, 17, 19, 20, 21, 22,
2 a) None
23, 24, 25, 26, 27, 28, 29, 30, 31
Clauses 6, 7, 8, 9, 10, 11, 13, 14, 15, 16, 17, 19, 20, 21, 22,
2 b) None
23, 24, 25, 26, 27, 28, 29
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...