Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications

This document specifies round and shaped non alloyed steel wire for use in the manufacture of ropes for mine hoisting, man-riding haulage, cableways for the transportation of passengers and other high duty applications. Heavy duty refers to situations where the stresses applied to the rope are either high or vary by a large amount during service.
This document refers to round wires and three types of shaped wire: full lock (Z), half lock (H) and trapezoidal (T).
It does not apply to steel wire taken from manufactured ropes.
This document specifies the following for cold drawn non alloyed steel wire for ropes for high duty applications:
-   dimensional tolerances;
-   mechanical characteristics;
-   requirements relating to the chemical composition of the steel wire;
-   conditions to be satisfied by any coating.

Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 3: Runder und profilierter Draht aus unlegiertem Stahl für hohe Beanspruchungen

Dieses Dokument legt runden und profilierten Draht aus unlegiertem Stahl zur Herstellung von Seilen für Schachtförderanlagen des Bergbaus, Personenbeförderung, Seilbahnen für Personenbeförderung und andere hohe Beanspruchungen fest. Schwere Beanspruchungen bestehen in den Fällen, in denen beim Einsatz hohe oder stark schwankende Spannungen auf das Seil wirken.
Dieses Dokument betrifft Runddrähte und drei Arten von Profildrähten: Z Drähte, Taillendrähte (H) und Keildrähte (T).
Er gilt nicht für Stahldrähte aus dem fertigen Seil.
Dieses Dokument trifft zu folgenden Punkten Festlegungen für kaltgezogenen Draht aus unlegiertem Stahl für Seile für hohe Beanspruchungen:
-   Maßtoleranzen;
-   mechanische Eigenschaften;
-   Anforderungen an die chemische Zusammensetzung des Stahldrahts;
-   Anforderungen an Überzüge.

Fils et produits tréfilés en acier - Fils en acier pour câbles - Partie 3: Fils ronds et profilés, en acier non aillé, pour fortes sollicitations

Le présent document spécifie les fils ronds et profilés en acier non allié pour utilisation dans la fabrication de câbles pour appareils de levage de mines, le transport du personnel, les installations de transport à câble destinées aux personnes et autres applications à fortes sollicitations. Le terme “fortes sollicitations” se rapporte à des situations où les contraintes subies par les câbles sont soit importantes, soit varient considérablement en service.
Le présent document traite des fils ronds et de trois types de profilés : clos (Z), mi-clos (H) et profiles trapézoïdaux (T).
Il ne s’applique pas aux fils d’acier prélevés sur les câbles fabriqués.
Le présent document spécifie pour les fils écrouis à froid par tréfilage en acier non allié pour câbles soumis à de fortes sollicitations :
-   les tolérances dimensionnelles ;
-   les caractéristiques mécaniques ;
-   les exigences relatives à la composition chimique des fils d’acier ;
-   les conditions auxquelles un revêtement éventuel doit satisfaire.

Jeklena žica in žični izdelki - Jeklena žica za vrvi - 3. del: Okrogla in oblikovana nelegirana jeklena žica za velike obremenitve

General Information

Status
Not Published
Public Enquiry End Date
25-Oct-2022
Technical Committee
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
18-Sep-2023
Due Date
06-Nov-2023

Relations

Buy Standard

Draft
prEN 10264-3:2022
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 10264-3:2022
01-oktober-2022
Jeklena žica in žični izdelki - Jeklena žica za vrvi - 3. del: Okrogla in oblikovana
nelegirana jeklena žica za velike obremenitve
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non
alloyed steel wire for high duty applications
Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 3: Runder und profilierter
Draht aus unlegiertem Stahl für hohe Beanspruchungen
Fils et produits tréfilés en acier - Fils en acier pour câbles - Partie 3: Fils ronds et
profilés, en acier non aillé, pour fortes sollicitations
Ta slovenski standard je istoveten z: prEN 10264-3
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
oSIST prEN 10264-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 10264-3:2022

---------------------- Page: 2 ----------------------
oSIST prEN 10264-3:2022


DRAFT
EUROPEAN STANDARD
prEN 10264-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2022
ICS 77.140.65 Will supersede EN 10264-3:2012
English Version

Steel wire and wire products - Steel wire for ropes - Part 3:
Round and shaped non alloyed steel wire for high duty
applications
Fils et produits tréfilés en acier - Fils en acier pour Stahldraht und Drahterzeugnisse - Stahldraht für Seile
câbles - Partie 3: Fils ronds et profilés, en acier non - Teil 3: Runder und profilierter Draht aus unlegiertem
aillé, pour fortes sollicitations Stahl für hohe Beanspruchungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 6.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10264-3:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 10264-3:2022
prEN 10264-3:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Designation of the product . 5
5 General conditions of manufacture . 5
6 Characteristics of the wire . 5
6.1 Tensile strength grades . 5
6.2 Profiles .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.