SIST EN 10264-3:2012
(Main)Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications
This part of this European Standard specifies round and shaped non alloyed steel wire for use in the manufacture of ropes for mine hoisting, man-riding haulage, cableways for the transportation of passengers and other high duty applications. This part of this European Standard refers to round wires and three types of shaped wire: full lock (Z), half lock (H) and trapezoidal (T). In addition to the requirements of this part of this European Standard, the requirements of EN 10264-1 also apply. It does not apply to steel wire taken from manufactured ropes. This part of this European Standard specifies the following for cold drawn non alloyed steel wire for ropes for high duty applications:
- dimensional tolerances;
- mechanical characteristics;
- requirements relating to the chemical composition of the steel wire;
- conditions to be satisfied by any coating.
Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 3: Runder und profilierter Draht aus unlegiertem Stahl für hohe Beanspruchungen
Dieser Teil der Europäischen Norm legt runden und profilierten Draht aus unlegiertem Stahl zur Herstellung von Seilen für Schachtförderanlagen des Bergbaus, Personenbeförderung, Seilbahnen für Personen-beförderung und andere hohe Beanspruchungen fest. Schwere Beanspruchungen bestehen in den Fällen, in denen beim Einsatz hohe oder stark schwankende Spannungen auf das Seil wirken.
Dieser Teil der Europäischen Norm betrifft Runddrähte und drei Arten von Profildrähten: Z-Drähte, Taillendrähte (H) und Keildrähte (T).
Zusätzlich zu den Anforderungen dieses Teils dieser Europäischen Norm gelten auch die Anforderungen von EN 10264-1.
Er gilt nicht für Stahldrähte aus dem fertigen Seil.
Dieser Teil der Europäischen Norm trifft zu folgenden Punkten Festlegungen für kaltgezogenen Draht aus unlegiertem Stahl für Seile für hohe Beanspruchungen:
- Maßtoleranzen;
- mechanische Eigenschaften;
- Anforderungen an die chemische Zusammensetzung des Stahldrahts;
- Anforderungen an Überzüge.
Fils et produits tréfilés en acier - Fils pour câbles - Partie 3: Fils ronds et profilés, en acier non aillé, pour fortes sollicitations
La présente partie de la présente Norme européenne spécifie les fils ronds et profilés en acier non allié pour
utilisation dans la fabrication de câbles pour appareils de levage de mines, le transport du personnel, les
installations de transport à câble destinées aux personnes (téléphériques) et autres applications à fortes
sollicitations. Le terme “fortes sollicitations” se rapporte à des situations où les contraintes subies par les
câbles sont soit importantes, soit varient considérablement en service.
Cette partie de la présente Norme européenne traite des fils ronds et de trois types de profilés : clos (Z), miclos
(H) et profiles trapézoïdaux (T).
En plus des prescriptions de la présente partie de la présente Norme européenne, les prescriptions de
l’EN 10264-1 sont également applicables.
Elle ne s’applique pas aux fils d’acier prélevés sur les câbles fabriqués.
La présente partie de la présente Norme européenne spécifie pour les fils écrouis à froid par tréfilage en acier
non allié pour câbles soumis à de fortes sollicitations.
- les tolérances dimensionnelles ;
- les caractéristiques mécaniques ;
- les exigences relatives à la composition chimique des fils d’acier ;
- les conditions auxquelles un revêtement éventuel doit satisfaire.
Jeklena žica in žični izdelki - Jeklena žica za vrvi - 3. del: Okrogla in oblikovana nelegirana jeklena žica za velike obremenitve
Ta del tega evropskega standarda določa okroglo in oblikovano nelegirano jekleno žico za uporabo v proizvodnji vrvi za prevažalne naprave v rudarstvu, vleko ljudi, žičnice za transport potnikov in druge velike obremenitve. Velike obremenitve zajemajo situacije, v katerih so napetosti v vrvi visoke ali se med uporabo močno spreminjajo. Ta del tega evropskega standarda obravnava okrogle žice in tri vrste oblikovane žice: povsem zaprta (full lock) (Z), delno zaprta (half lock) (H) in trapeznao (T). Poleg zahtev iz tega dela tega evropskega standarda se uporabljajo tudi zahteve iz standarda EN 10264-1. Standard se ne uporablja za jekleno žico iz izdelanih vrvi. Ta del tega evropskega standarda določa naslednje zahteve za hladno vlečeno nelegirano jekleno žico za vrvi za velike obremenitve: tolerance mer; mehanske značilnosti; zahteve, povezane s kemijsko sestavo jeklene žice; pogoji, ki jih morajo izpolnjevati premazi.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 3: Runder und profilierter Draht aus unlegiertem Stahl für hohe BeanspruchungenFils et produits tréfilés en acier - Fils pour câbles - Partie 3: Fils ronds et profilés, en acier non aillé, pour fortes sollicitationsSteel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains77.140.45Nelegirana jeklaNon-alloyed steelsICS:Ta slovenski standard je istoveten z:EN 10264-3:2012SIST EN 10264-3:2012en,fr,de01-marec-2012SIST EN 10264-3:2012SLOVENSKI
STANDARDSIST EN 10264-3:20031DGRPHãþD
SIST EN 10264-3:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10264-3
January 2012 ICS 77.140.65 Supersedes EN 10264-3:2002English Version
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications
Fils et produits tréfilés en acier - Fils pour câbles - Partie 3: Fils ronds et profilés, en acier non aillé, pour fortes sollicitations
Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 3: Runder und profilierter Draht aus unlegiertem Stahl für hohe Beanspruchungen This European Standard was approved by CEN on 19 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10264-3:2012: ESIST EN 10264-3:2012
EN 10264-3:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Designation of the product .54 General conditions of manufacture .55 Characteristics of the wire .55.1 Tensile strength grades .55.2 Profiles .65.2.1 Definition of shaped wire .65.2.2 Equivalent diameter .85.3 Minimum requirements for wire characteristics .85.3.1 Dimension – measured values .85.3.2 Reverse bend test .95.3.3 Torsion test . 125.3.4 Zinc and Zn95/Al5 coatings .
...
SLOVENSKI STANDARD
oSIST prEN 10264-3:2008
01-september-2008
-HNOHQDåLFDLQåLþQLL]GHONL-HNOHQDåLFD]DYUYLGHO 2NURJODLQREOLNRYDQD
QHOHJLUDQDMHNOHQDåLFD]DYHOLNHREUHPHQLWYH
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non
alloyed steel wire for high duty applications
Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 3: Runder und profilierter
Draht aus unlegiertem Stahl für hohe Beanspruchungen
Fils et produits tréfilés en acier - Fils pour câbles - Partie 3: Fils ronds et profilés, en acier
non aillé, pour fortes sollicitations
Ta slovenski standard je istoveten z: prEN 10264-3
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
oSIST prEN 10264-3:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10264-3:2008
---------------------- Page: 2 ----------------------
oSIST prEN 10264-3:2008
EUROPEAN STANDARD
DRAFT
prEN 10264-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 77.140.65 Will supersede EN 10264-3:2002
English Version
Steel wire and wire products - Steel wire for ropes - Part 3:
Round and shaped non alloyed steel wire for high duty
applications
Fils et produits tréfilés en acier - Fils pour câbles - Partie 3:
Fils ronds et profilés, en acier non aillé, pour fortes
sollicitations
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ECISS/TC 30.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10264-3:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10264-3:2008
prEN 10264-3:2008 (E)
Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Designation of the product .5
4 General conditions of manufacture .5
5 Characteristics of the wire.5
5.1 Tensile strength grades .5
5.2 Profiles.6
5.2.1 Definition of shaped wire .6
5.2.2 Equivalent diameter.8
5.3 Minimum requirements for wire characteristics.8
5.3.1 Dime
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.