SIST EN ISO 20768:2022/A1:2025
(Amendment)Vapour products - Routine analytical vaping machine - Definitions and standard conditions - Amendment 1: Correction of puff profile requirements (ISO 20768:2018/Amd 1:2025)
Vapour products - Routine analytical vaping machine - Definitions and standard conditions - Amendment 1: Correction of puff profile requirements (ISO 20768:2018/Amd 1:2025)
Dampfprodukte - Maschine für die Routineanalyse von Dampfprodukten - Begriffe und Standardbedingungen - Änderung 1 (ISO 20768:2018/Amd 1:2025)
Produits de vapotage - Machine à vapoter pour analyses de contrôle - Définitions et conditions normalisées - Amendement 1: Correction des exigences relatives au profil de la bouffée (ISO 20768:2018/Amd 1:2025)
Hlapni proizvodi - Uparjalniki za kontrolne analize - Definicije in standardni pogoji - Dopolnilo A1: Popravek zahtev za profil puha (ISO 20768:2018/Amd 1:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2025
Hlapni proizvodi - Uparjalniki za kontrolne analize - Definicije in standardni pogoji -
Dopolnilo A1: Popravek zahtev za profil puha (ISO 20768:2018/Amd 1:2025)
Vapour products - Routine analytical vaping machine - Definitions and standard
conditions - Amendment 1: Correction of puff profile requirements (ISO 20768:2018/Amd
1:2025)
Dampfprodukte - Maschine für die Routineanalyse von Dampfprodukten - Begriffe und
Standardbedingungen - Änderung 1 (ISO 20768:2018/Amd 1:2025)
Produits de vapotage - Machine à vapoter pour analyses de contrôle - Définitions et
conditions normalisées - Amendement 1: Correction des exigences relatives au profil de
la bouffée (ISO 20768:2018/Amd 1:2025)
Ta slovenski standard je istoveten z: EN ISO 20768:2021/A1:2025
ICS:
65.160 Tobak, tobačni izdelki in Tobacco, tobacco products
oprema and related equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20768:2021/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2025
EUROPÄISCHE NORM
ICS 65.160
English Version
Vapour products - Routine analytical vaping machine -
Definitions and standard conditions - Amendment 1:
Correction of puff profile requirements (ISO
20768:2018/Amd 1:2025)
Produits de vapotage - Machine à vapoter pour Dampfprodukte - Maschine für die Routineanalyse von
analyses de contrôle - Définitions et conditions Dampfprodukten - Begriffe und Standardbedingungen -
normalisées - Amendement 1: Correction des exigences Änderung 1: Korrektur der Anforderungen an das
relatives au profil de la bouffée (ISO 20768:2018/Amd Zugprofil (ISO 20768:2018/Amd 1:2025)
1:2025)
This amendment A1 modifies the European Standard EN ISO 20768:2021; it was approved by CEN on 21 June 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20768:2021/A1:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20768:2021/A1:2025) has been prepared by Technical Committee ISO/TC 126
"Tobacco and tobacco products" in collaboration with Technical Committee CEN/TC 437 “Electronic
cigarettes and e-liquids” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 20768:2021 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2025,
and conflicting national standards shall be withdrawn at the latest by December 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.