SIST EN 14075:2003/A1:2005

Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground - Design and manufacture

Address/consider technical issues raised during the resolution CEN/TC 286 C05/2001 by France and Belgium.

Ortsfeste, geschweißte zylindrische Behälter aus Stahl, die serienmäßig für die Lagerung von Flüssiggas (LPG) hergestellt werden, mit einem Fassungsvermögen bis 13 m3 für erdgedeckte Aufstellung - Gestaltung und Herstellung

Réservoirs cylindriques fixes en acier, soudés, fabriqués en série, d'un volume inférieur ou égal a 13 m3, destinés au stockage enterré des gaz de pétrole liquéfiés (GPL) - Conception et fabrication

Stabilni valjasti varjeni jekleni rezervoarji serijske izdelave za skladiščenje utekočinjenega naftnega plina (UNP) podzemne izvedbe z notranjo prostornino do 13 m3 - Načrtovanje in izdelava

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2005
• Withdrawal Date: 17-Oct-2010
• ICS: 23.020.10 - Stationary containers and tanks
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 15-Oct-2010
• Due Date: 07-Nov-2010
• Completion Date: 18-Oct-2010
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 14075:2002/A1:2004 - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ and for installation underground - Design and manufacture

Relations

• Replaced By: SIST EN 12542:2010 - LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
• Effective Date: 01-Dec-2010
• Amends: SIST EN 14075:2003 - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground - Design and manufacture
• Effective Date: 01-Mar-2005
• Amends: SIST EN 14075:2003 - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground - Design and manufacture
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14075:2003/A1:2005
01-marec-2005
6WDELOQLYDOMDVWLYDUMHQLMHNOHQLUH]HUYRDUMLVHULMVNHL]GHODYH]DVNODGLãþHQMH
XWHNRþLQMHQHJDQDIWQHJDSOLQD813SRG]HPQHL]YHGEH]QRWUDQMRSURVWRUQLQRGR
P1DþUWRYDQMHLQL]GHODYD
Static welded steel cylindrical tanks, serially produced for the storage of Liquefied
Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation
underground - Design and manufacture
Ortsfeste, geschweißte zylindrische Behälter aus Stahl, die serienmäßig für die Lagerung
von Flüssiggas (LPG) hergestellt werden, mit einem Fassungsvermögen bis 13 m3 für
erdgedeckte Aufstellung - Gestaltung und Herstellung
Réservoirs cylindriques fixes en acier, soudés, fabriqués en série, d'un volume inférieur
ou égal a 13 m3, destinés au stockage enterré des gaz de pétrole liquéfiés (GPL) -
Conception et fabrication
Ta slovenski standard je istoveten z: EN 14075:2002/A1:2004
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
SIST EN 14075:2003/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14075:2003/A1:2005

---------------------- Page: 2 ----------------------

SIST EN 14075:2003/A1:2005
EUROPEAN STANDARD
EN 14075:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 23.020.30
English version
Static welded steel cylindrical tanks, serially produced for the
storage of Liquefied Petroleum Gas (LPG) having a volume not
greater than 13 m³ and for installation underground - Design and
manufacture
Réservoirs cylindriques fixes en acier, soudés, fabriqués en Ortsfeste, geschweißte zylindrische Behälter aus Stahl, die
série, d'un volume inférieur ou égal à 13 m³, destinés au serienmäßig für die Lagerung von Flüssiggas (LPG)
stockage enterré des gaz de pétrole liquéfiés (GPL) - hergestellt werden, mit einem Fassungsvermögen bis 13
Conception et fabrication m³ für erdgedeckte Aufstellung - Gestaltung und
Herstellung
This amendment A1 modifies the European Standard EN 14075:2002; it was approved by CEN on 21 October 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14075:2002/A1:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14075:2003/A1:2005
EN 14075:2002/A1:2004 (E)
Foreword
This document (EN 14075:2002/A1:2004) has been prepared by Technical Committee CEN/TC 286 “Liquefied
petroleum gas equipment and accessories”, the secretariat of which is held by NSAI.
This Amendment to the European Standard EN 14075:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national
standards shall be withdrawn at the latest by June 2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 14075:2003/A1:2005
EN 14075:2002/A1:2004 (E)
Page 8, sub-clause 3.4
Delete "batch" and replace with "production-batch".
Page 8, sub-clause 3.8
Delete 3.8 completely and re-number subsequent definitions.
Page 9, sub-clause 3.11
Delete 3.11 and replace with the following:
"3.10
Ar
3
critical point, on the iron – iron carbide equilibrium diagram, representing the temperature at the end of
transformation of austenite to ferrite on cooling of the steel”
Page 9, sub-clause 4.1
th
Delete the 5 bullet point and replace it with the following:
 "steels in sub-group 2.2 shall have a carbon equivalent limited to 0,43 %, maximum, when calculated in
accordance with EN 10028-5.”
Page 10, sub-clause 4.2
st
Delete 1 paragraph and replace it with the following:
“Materials for pressure parts, other than shells and ends, shall conform to the appropriate harmonised
European Standard for the material, or a similar specification which has European materials approval or
particular material appraisal.”
Page 11, sub-clause 4.4
st
Delete 1 paragraph and replace with the following:
“The welding consumables shall be such that they are capable of giving consistent welds with properties at
least equal to those specified for the parent materials of the finished tank.”
Page 11, sub-clause 4.5
Delete sub-clause and replace with the following:
“The tank manufacturer shall obtain certificates showing the chemical analysis and details of the mechanical
properties of the steel supplied for the construction of the pressure retaining parts of the tank. The certificates
shall be in accordance with EN 10204, certificate Type 3.1.B. The certificate shall include, or be supplemented
by, the material manufactures' documented affirmation of compliance to the material specification.”
Page 11, sub-clause 5.1
Add a comma after "ISO 9162".
Page 12, sub-clause 5.3
Delete sub-clause and replace with the following:
“The design pressure, p (see 3.8), shall not be less than the maximum pressure reached in service, in
accordance with Annex A. It shall be selected taking into account:
3

---------------------- Page: 5 ----------------------

SIST EN 14075:2003/A1:2005
EN 14075:2002/A1:2004 (E)
 the pressure developed by the LPG at the maximum soil temperature at 1 m depth; and
 the maximum pressure of the LPG delivered into the tank.”
Page 12, sub-clause 5.4
Delete note 1 and replace with the following:
"NOTE 1 This can be demonstrated by calculation in accordance with EN 13445-3”
Page 14, sub-clause 7.5.1
nd
Delete 2 paragraph and replace with the following:
“Ends shall be made from one piece of plate.”
Page 14, sub-clause 7.5.2.1
st
Delete 1 paragraph and replace with the following:
“Cold formed ends shall be heat treated after forming, unless it can be demonstrated that the properties
specified in 4.1 are met, or a burst test on a prototype tank demonstrates that the formed component is not the
weakest part of the tank.”
Page 15, sub-clause 7.5.3
st
Delete 1 paragraph and replace with the following:
“F
...