Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression

This European Standard specifies a method for the determination of the modulus of elasticity in compression for high creep strain repair products and systems, containing polymer binders (PC) and of mortars and concretes with polymer additives (PCC).
This method is not intended for CC repair materials, for which testing according to prEN 12390-3 should be used.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung des Elastizitätsmoduls im Druckversuch

Anwendungsbereich
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Elastizitätsmoduls im Druckversuch von stark kriechenden Instandsetzungsprodukten und -systemen mit polymeren Bindemitteln (PC) sowie von Mörtel und Betonen mit Polymerzusätzen (PCC) fest.
Dieses Verfahren ist nicht für CC-Instandsetzungsmaterialien geeignet, für deren Prüfung das in prEN 12390-3 angegebene Verfahren angewendet werden sollte.

Produits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du module d'élasticité en compression

La présente Norme européenne spécifie une méthode permettant de déterminer le module d'élasticité en compression des produits et systèmes de réparation à déformation de fluage élevée, contenant des liants polymères (PC) et des mortiers et des bétons contenant des liants hydrauliques et des adjuvants polymères (PCC).
Cette méthode ne s'applique pas aux matériaux de réparation CC pour lesquels il convient d'utiliser une méthode d'essai conforme à l'EN 12390-3.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - Določevanje modula elastičnosti pri tlačni obremenitvi

General Information

Status
Withdrawn
Publication Date
31-Oct-2002
Withdrawal Date
30-Nov-2006
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Dec-2006
Due Date
01-Dec-2006
Completion Date
01-Dec-2006

Relations

Buy Standard

Standard
EN 13412:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung des Elastizitätsmoduls im DruckversuchProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du module d'élasticité en compressionProducts and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 13412:2002SIST EN 13412:2002en01-november-2002SIST EN 13412:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13412May 2002ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of modulus ofelasticity in compressionProduits et systèmes de protection et de réparation desstructures en béton - Méthodes d'essai - Détermination dumodule d'élasticité en compressionProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung des Elastizitätsmoduls im DruckversuchThis European Standard was approved by CEN on 27 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13412:2002 ESIST EN 13412:2002

Summary of temperatures and humidities for the curing, conditioning andtesting of repair products and systems.8SIST EN 13412:2002
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.