iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN IEC 60335-2-104:2024/oprAA:2024

(Amendment)

Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment

Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment

This European Standard deals with the safety of electrical recovery and/or recycle equipment to recover and/or recycle refrigerant from air conditioning and refrigeration equipment.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-104: Besondere Anforderungen für Geräte zur Rückgewinnung und/oder zum Recycling von Kältemittel aus Klimaanlagen und Kühlgeräten

Appareils électrodomestiques et analogues - Sécurité - Partie 2-104: Exigences particulières pour les appareils de récupération et/ou de recyclage des fluides frigorigènes des climatiseurs et des appareils de réfrigération

Gospodinjski in podobni električni aparati - Varnost - 2-104. del: Posebne zahteve za aparate za zbiranje in/ali recikliranje hladilnega sredstva iz klimatskih naprav in hladilne opreme - Dopolnilo AA

General Information

Status
Not Published
Public Enquiry End Date
30-Jul-2024
ICS
27.200 - Refrigerating technology
71.100.45 - Refrigerants and antifreezes
Technical Committee
VGA - Safety of household and similar electrical appliances
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
03-Jun-2024
Due Date
21-Oct-2024
Ref Project
prEN IEC 60335-2-104:2024/prAA:2024 - Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment

Buy Standard

prEN IEC 60335-2-104:2024/oprAA:2024prEN IEC 60335-2-104:2024/oprAA:2024
PreviousNext
Draft
prEN IEC 60335-2-104:2024/oprAA:2024
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60335-2-
104:2024/oprAA:2024
01-julij-2024
Gospodinjski in podobni električni aparati - Varnost - 2-104. del: Posebne zahteve
za aparate za zbiranje in/ali recikliranje hladilnega sredstva iz klimatskih naprav in
hladilne opreme - Dopolnilo AA
Household and similar electrical appliances - Safety - Part 2-104: Particular requirements
for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration
equipment
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-104:
Besondere Anforderungen für Geräte zur Rückgewinnung und/oder zum Recycling von
Kältemittel aus Klimaanlagen und Kühlgeräten
Appareils électrodomestiques et analogues - Sécurité - Partie 2-104: Exigences
particulières pour les appareils de récupération et/ou de recyclage des fluides
frigorigènes des climatiseurs et des appareils de réfrigération
Ta slovenski standard je istoveten z: prEN IEC 60335-2-104:2024/prAA:2024
ICS:
27.200 Hladilna tehnologija Refrigerating technology
71.100.45 Hladiva in antifrizi Refrigerants and antifreezes
oSIST prEN IEC 60335-2- en
104:2024/oprAA:2024
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60335-2-104:2024/oprAA:2024

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60335-2-104:2024/oprAA:2024


EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-104:2024
NORME EUROPÉENNE

EUROPÄISCHE NORM
prAA
May 2024
ICS 27.200; 71.100.45 -
English Version
Household and similar electrical appliances - Safety - Part 2-104:
Particular requirements for appliances to recover and/or recycle
refrigerant from air conditioning and refrigeration equipment
To be completed Sicherheit elektrischer Geräte für den Hausgebrauch und
ähnliche Zwecke - Teil 2-104: Besondere Anforderungen für
Geräte zur Rückgewinnung und/oder zum Recycling von
Kältemittel aus Klimaanlagen und Kühlgeräten
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60335-2-104:2024; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2024-08-09.

It has been drawn up by CLC/TC 61.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78636 Ref. No. prEN IEC 60335-2-104:2024/prAA:2024 E

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60335-2-104:2024/oprAA:2024
prEN IEC 60335-2-104:2024/prAA:2024 (E)
1 European foreword
2 This document (prEN IEC 60335-2-104:2024/prAA:2024) has been prepared by CLC/TC 61 "Safety of
3 household and similar electrical appliances".
4 This document is currently submitted to Enquiry.
5 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
6 This document is read in conjunction with prEN IEC 60335-2-104:2024.
7 The numbering system for European
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14624:2020(Main)
Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
EN 14624:2020

This document specifies the requirements for portable locating leak detectors and fixed gas detectors for all refrigerants.
Locating detectors used in factories for manufacturing processes are not included in the Scope of prEN 14624.
1.1   Product application:
This document applies to different applications and environments such as plant and machine rooms, production rooms, cold rooms, supermarkets, occupied spaces like offices and hotels.
1.2   Product performance:
This document specifies minimum requirements for sensitivity, operating range, response time, environmental conditions and cross sensitivity from interference gases.
1.3   Product installation:
This document gives guidance of suitable technology, location of detection points, interconnection with secondary equipment (e.g. initiation of mechanical ventilation, personnel warning, equipment shutdown).
1.4   Service and maintenance:
This document gives guidance for service and maintenance: Sensors and mechanical equipment have a limited operating life and require regular performance verification to ensure conformity.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 17893:2024(Main)
Thermal road vehicles - Safety standard for temperature-controlled systems using flammable refrigerants for the transport of goods - Requirements and risk analysis process
EN 17893:2024

This document specifies requirements for the use of flammable refrigerants class A2L, A2 and A3 as defined in ISO 817 with regard to:
-   design and construction (as far as not specified in EN 378-2);
-   operation;
-   in all anticipated operational modes and locations;
-   including continuous idling during standstill;
-   service and maintenance decommissioning;
for the investigation and mitigation of risk for thermally insulated means of transport, including: trucks, trailers, tanks, vans (light commercial vehicles), wagons, containers for land transport, small containers, packaging.
This document describes an Operational Mode Risk Assessment (OMRA), which uses methods such as Hazard and Operability Analysis (HAZOP), Failure Mode and Effects and Criticality Analysis (FMECA), or Fault Tree Analysis (FTA) or a combination of these methods;
The document specifies requirements:
-   for the validation and consideration of possible safety concepts and protective devices within the OMRA process, including charge release tests, simulation, and function tests of the associated protective equipment;
-   for tests related to the application;
using methodologies to achieve tolerable risk values.
Passenger air conditioning or equivalent mobile air conditioning systems covered in ISO 13043 and refrigerated containers on skeletal trailers conforming to ISO 20854 are excluded.

  • Draft
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50726-1:2024(Main)
Emergency and danger systems - Part 1: Emergency and danger response systems (EDRS) - Basic requirements, duties, responsibilities and activities
EN 50726-1:2024

This document applies to the planning, installation, commissioning, operation and maintenance of an emergency and danger response system. An emergency and danger response system is part of an overall solution for dealing with specific events such as emergencies or crises.
This document
-   specifies:
-   technical processes and responsibilities for supporting all procedures from the registration of an event (emergency, danger) up to its final processing;
-   the technical risk management including the definition of safety/security goals and the workflow organization as well as the necessary specifications regarding a technical risk management file;
-   associated duties, responsibilities and activities as parts of an integrated overall risk management process to achieve the safety and security goals, effectiveness and efficiency as well as data and system safety/security;
-   three different grades of safety/security, with the respective product functionalities required to achieve them;
-   the basic requirements for emergency and danger response systems (EDRS) in public buildings such as education facilities (e.g. schools, universities), government facilities, kindergartens and similar facilities;
-   the responsibilities under applicable national law about Safety and Health at Work Laws and thus particularly addresses the responsibility of employers;
-   describes:
-   the process of establishing, maintaining and updating a risk management file in which, inter alia, the technical risks are listed and evaluated and the residual technical risks are defined, resulting in the grade and structure of the EDRS;
-   is intended to support the implementation of:
-   National legal and other provisions (e.g. Act on Equal Opportunities for People with Disabilities, Safety and Health at Work Laws, education laws);
-   gives relevant guidance on:
-   the organizational risk management;
-   does not replace the specifications of standards to the following systems:
-   fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems,
-   security systems including, but not limited to, intrusion and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems,
-   applicable national standards on call systems.
All such systems can, however, be integrated into an emergency and danger response system (EDRS), taking into account the relevant provisions made in the respective standards for such products and systems.
Other products and systems from the entire field of standardization, such as alarm systems, danger warning and danger alarm systems, escape routing systems, public address systems used to respond to a danger, can also be used in or integrated into an emergency and danger response system if the relevant requirements of the standards for such products or systems are met.
This document does not specify any risk levels, in particular no acceptable residual risks. Technical risk management and organizational risk management are equal parts of the overall risk management.
This document is also applicable to non-public buildings with a similar risk and requirement for protection.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1751:2024(Main)
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves
EN 1751:2024

This document specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences up to 2 000 Pa.
The tests incorporated in this document will address:
-   leakage past a closed damper or valve (for classification see Annex C);
-   casing leakage (for classification see Annex C);
-   flow rate/pressure requirement characteristics;
-   torque: (see Annex A);
-   thermal transmittance: (see Annex B).
The acoustic testing of dampers and valves is not included in this document. The tests specified above apply to the following:
-   measurement of leakage past a closed damper or valve;
-   measurement of casing leakage;
-   determination of flow rate and pressure requirements;
-   measurement of torque characteristics (see Annex A);
-   measurement of thermal transfer characteristics to determine insulation properties (see Annex B).
NOTE   Certain aspects of the dynamic performance of dampers and/or valves are dependent upon the air distribution system to which they are connected and are, therefore, difficult to measure in isolation. Such considerations have led to the omission of these aspects of the dynamic performance measurements from this document. Also, in common with other air distribution components, the results from tests carried out in accordance with this document may not be directly applicable if the damper or valve is situated in an area of non-uniform flow.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50528:2024(Main)
Insulating ladders for use on or near low voltage electrical installations
EN 50528:2024

This document is applicable to portable ladders made only of non-conductive stiles, including accessories (pole leaning device, adjustable levelling device, adjustable ladder stabilizer, etc.) used to work on or near electrical systems and installations in the low voltage range (up to 1 000 V AC/1 500 V DC.).
These ladders are used, to provide temporary access, generally on overhead line structures and to undertake electrical operations. They are intended to be used by one person only.
These ladders, in conjunction with other protective equipment provide sufficient insulation level to protect against inadvertent contact with live low voltage installations.
This document does not cover ladders used for live working on electrical installations at voltages above 1 000 V AC and above 1 500 V DC. These insulating ladders are separately covered by EN 61478.
This document does not cover products not made entirely with non-conductive stiles generally called mixed ladders. In this case EN 131 series apply.
This document does not cover step stools which are covered by EN 14183.
These ladders are only for professional use. Only skill persons, after an appropriate training can use this type of ladder for professional applications.
The products designed and manufactured according to this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use (where appropriate).

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16867:2020+A2:2024(Main + Amendment)
Building hardware - Mechatronic door furniture - Requirements and test methods
EN 16867:2020+A2:2024

1.1   General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2   Exclusions
This document does not cover:
-   mechatronic cylinders according to EN 15684;
-   electromechanical operated locks and striking plates according to EN 14846.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6806:2024(Main)
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2024)
EN ISO 6806:2024

ISO 6806:2017 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.
The following two types of hose assembly are specified.
- Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.
- Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C.
The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13557:2024(Main)
Cranes - Controls and control stations
EN 13557:2024

This document specifies health and safety design requirements for control devices and control stations for all types of cranes.
Specific requirements for particular types of crane are given in the appropriate European standard for the particular crane type.
Control systems are covered by other standards, e.g. EN 60204-32:2008 and EN 13135:2013+A1:2018.
This document does not deal with noise hazards because these are dealt with in safety standards for specific types of cranes. It also does not address the design of the cabin with regard to its sound insulation properties.
This document covers specific hazards, which could occur during the use of control devices and control stations. It does not cover hazards, which could occur during transport, construction, modification, de-commissioning or disposal. The hazards covered by this standard are identified in Clause 4.
This document is applicable after the date of approval by CEN of this standard.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12183:2024(Main)
Nuclear fuel technology - Controlled-potential coulometric measurement of plutonium (ISO 12183:2024)
EN ISO 12183:2024

ISO 12183:2016 describes an analytical method for the electrochemical assay of pure plutonium nitrate solutions of nuclear grade, with a total uncertainty not exceeding ±0,2 % at the confidence level of 0,95 for a single determination (coverage factor, K = 2). The method is suitable for aqueous solutions containing more than 0,5 g/L plutonium and test samples containing between 4 mg and 15 mg of plutonium. Application of this technique to solutions containing less than 0,5 g/L and test samples containing less than 4 mg of plutonium requires experimental demonstration by the user that applicable data quality objectives will be met.
For some applications, purification of test samples by anion exchange is required before measurement to remove interfering substances when present in significant amounts.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63281-3-1:2024(Main)
E-Transporters - Part 3-1: Performance test method for total run time of e-scooters with consideration to environmental conditions of actual use (IEC 63281-3-1:2024)
EN IEC 63281-3-1:2024

IEC 63281-3-1:2024 specifies the test method for the total run time of an e-scooter for single-person transportation with consideration of the temperature conditions of actual use when the e-scooter is operated by the user in various temperatures for use on the road or in public spaces.
This document does not cover e-scooters for persons with disabilities or elderly persons. Also, this document excludes cargo e-scooters.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day