SIST EN 4060:2002

Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Filler rods and filler wires for welding
in heat resisting alloys
Diameter 0,5 mm * D * 5,0 mm
for aerospace applications.

Luft- und Raumfahrt - Schweißzusatzstäbe und -drähte aus hochwarmfesten Legierungen - Durchmesser 0,5 mm = D = 5,0 mm - Maße

Diese Norm legt die Maße und Toleranzen von:
Schweißzusatzstäben und -drähten
aus hochwarmfesten Legierungen
Durchmesser 0,5 mm = D = 5,0 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Baguettes et fils d'apport de soudage en alliages résistant a chaud - Diametres 0,5 mm < = D < = 5,0 mm - Dimensions

Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions

General Information

• Status: Published
• Publication Date: 31-Dec-2001
• ICS: 49.025.05 - Ferrous alloys in general
• ICS: 49.025.15 - Non-ferrous alloys in general
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2002
• Due Date: 01-Jan-2002
• Completion Date: 01-Jan-2002
• Ref Project: EN 4060:2001 - Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions

Overview

EN 4060:2001 - published by CEN (prepared by AECMA) - is an aerospace series standard that specifies the dimensions and tolerances for filler rods and filler wires used for welding in heat‑resisting alloys. It covers filler products with diameters from 0.5 mm to 5.0 mm, defining form, recommended nominal dimensions and linear mass, length options, and basic geometric requirements needed for aerospace fabrication and procurement.

Key topics

• Scope and form: Applies to filler rods and filler wires for welding in heat‑resisting alloys for aerospace applications; nominal diameter range 0.5 mm ≤ D ≤ 5.0 mm.
• Recommended dimensions and mass: Provides nominal diameters, cross‑sectional areas and calculated linear mass (density used for calculation noted as 8.1 kg/dm3).
• Length and supply: Specifies that rods are typically 1 000 mm long; orders must indicate whether bars are to be supplied in fixed or random lengths. Wire length must be specified on the order.
• Dimensional tolerances: Tables in the standard set diameter tolerances for both rods and wires across specific diameter ranges. Tolerances on rod length are given (e.g., ±5 mm).
• Geometric tolerances: Roundness requirements - roundness must be contained within the stated diameter tolerances.
• Normative linkage: Part of the aerospace metallic materials series and linked to EN 4258 (general organisation of standardization for the series).

Applications

• Specifying and procuring filler rods and wires for welding of high‑temperature components such as turbine parts, exhaust systems and other heat‑resisting alloy assemblies in aerospace manufacture and maintenance.
• Ensuring interchangeability and dimensional consistency across suppliers to maintain weld quality and fit‑up in production and repair operations.
• Supporting quality inspection, incoming goods verification, and acceptance criteria for welding consumables used in aviation and space systems.

Who uses this standard

• Procurement and sourcing teams at aerospace manufacturers and suppliers
• Welding engineers and fabricators working with heat‑resisting alloys
• Quality assurance and inspection personnel verifying dimensional conformity
• Specification writers and design engineers who need consistent consumable dimensions for assembly and repair processes

Related standards

• EN 4258 (Aerospace series – Metallic materials – General organization of standardization) - provides the series organisation and links between EN standards used alongside EN 4060.

Keywords: EN 4060:2001, filler rods, filler wires, heat resisting alloys, welding consumables, aerospace standard, dimensions, tolerances, roundness, linear mass.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm < = D < = 5,0 mm - DimensionsLuft- und Raumfahrt - Schweißzusatzstäbe und -drähte aus hochwarmfesten Legierungen - Durchmesser 0,5 mm = D = 5,0 mm - MaßeSérie aérospatiale - Baguettes et fils d'apport de soudage en alliages résistant a chaud - Diametres 0,5 mm < =
D < =
5,0 mm - DimensionsAerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm < =
D < = 5,0 mm - Dimensions49.025.15Neželezove zlitine na splošnoNon-ferrous alloys in general49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 4060:2001SIST EN 4060:2002en01-januar-2002SIST EN 4060:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4060September 2001ICS 49.025.05; 49.025.15English versionAerospace series - Filler rods and filler wires for welding in heatresisting alloys - Diameter 0,5 mm
D
5,0 mm - DimensionsSérie aérospatiale - Baguettes et fils d'apport de soudageen alliages résistant à chaud - Diamètres 0,5 mm
D
5,0mm - DimensionsLuft- und Raumfahrt - Schweißzusatzstäbe und -drähte aushochwarmfesten Legierungen - Durchmesser 0,5 mm
D 5,0 mm - MaßeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4060:2001 ESIST EN 4060:2002
...