SIST EN 2002-21:2020

Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings

This document specifies the requirements for the radiographic inspection of castings for aerospace applications.
It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Teil 21: Röntgenographische Prüfung von Gußstücken

Dieses Dokument legt die Anforderungen an die Durchstrahlungsprüfung von Gussteilen für Anwendungen in der Luft  und Raumfahrt fest.
Es muss angewendet werden, wenn darauf in EN Werkstoffnormen oder Technischen Lieferbedingungen verwiesen wird, sofern in der Zeichnung, Bestellung oder Prüfanweisung keine anderslautenden Festlegungen bestehen.

Série aérospatiale - Matériaux métalliques - Méthodes d'essai - Partie 21 : Examen radiographique des pièces moulées

Le présent document spécifie les exigences pour l’examen radiographique des pièces moulées pour les applications aérospatiales.
Il doit être appliqué lorsqu'il est cité en référence dans la spécification technique ou la norme de matériau EN, sauf instruction contraire figurant sur le dessin, la commande ou la fiche d’essais.

Aeronavtika - Kovinski materiali - Preskusne metode - 21. del: Radiografsko preskušanje ulitkov

Ta dokument določa zahteve za radiografsko preiskavo ulitkov za uporabo v aeronavtiki. Uporabljati ga je treba, kadar se nanj sklicuje v tehnični specifikaciji ali standardu EN za materiale, razen če je na risbi, v naročilu ali v razporedu pregledov navedeno drugače.

General Information

• Status: Published
• Publication Date: 11-Dec-2019
• ICS: 49.025.05 - Ferrous alloys in general
• ICS: 49.025.15 - Non-ferrous alloys in general
• ICS: 77.140.80 - Iron and steel castings
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Dec-2019
• Due Date: 10-Feb-2020
• Completion Date: 12-Dec-2019
• Ref Project: EN 2002-21:2019 - Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2002-21:2020
01-februar-2020
Aeronavtika - Kovinski materiali - Preskusne metode - 21. del: Radiografsko
preskušanje ulitkov
Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of
castings
Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Teil 21:
Röntgenographische Prüfung von Gußstücken
Série aérospatiale - Matériaux métalliques - Méthodes d'essai - Partie 21 : Examen
radiographique des pièces moulées
Ta slovenski standard je istoveten z: EN 2002-21:2019
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
77.140.80 Železni in jekleni ulitki Iron and steel castings
SIST EN 2002-21:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2002-21:2020

---------------------- Page: 2 ----------------------
SIST EN 2002-21:2020


EN 2002-21
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2019
EUROPÄISCHE NORM
ICS 49.025.05; 49.025.15
English Version

Aerospace series - Metallic materials - Test methods - Part
21: Radiographic testing of castings
Série aérospatiale - Matériaux métalliques - Méthodes Luft- und Raumfahrt - Metallische Werkstoffe -
d'essais - Partie 21 : Examen radiographique des pièces Prüfverfahren - Teil 21: Durchstrahlungsprüfung von
moulées Gußstücken
This European Standard was approved by CEN on 8 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2002-21:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2002-21:2020
EN 2002-21:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Health and safety . 5
5 Principle . 5
6 Testing requirements . 5
7 Inspection report . 7

2

---------------------- Page: 4 ----------------------
SIST EN 2002-21:2020
EN 2002-21:2019 (E)
European foreword
This document (EN 2002-21:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by May 2020, and conflicting national standards shall be withdrawn at
the latest by May 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.

3

---------------------- Page: 5 ----------------------
SIST EN 2002-21:2020
EN 2002-21:2019 (E)
1 Scope
This document specifies the requirements for the radiographic testing of castings for aerospace
applications.
It shall be applied when referred to in the EN technical specification or material standard unless
otherwise specified on the drawing, order or testing schedule.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1330-1, Aerospace series — Non-destructive testing — Terminology — Part 1: List of general terms
EN 1330-2, Aerospace series — Non-destructive testing — Terminology — Part 2: Terms common to the
non-destructive testing methods
EN 1330-3, Aerospace series — Non-destructive testing — Terminology — Part 3: Terms used in industrial
radiographic testin
...