SIST EN ISO 11111-4:2005/A2:2017

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 11111-4:2005/Amd 2:2016)

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24 GVN: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).

Textilmaschinen - Sicherheitsanforderungen - Teil 4: Garnverarbeitungs-, Seilereiwaren- und Seilereimaschinen - Änderung 2 (ISO 11111-4:2005/Amd 2:2016)

Matériel pour l'industrie textile - Exigences de sécurité - Partie 4: Machines de transformation du fil et machines de production de cordages et d'articles de corderie - Amendement 2 (ISO 11111-4:2005/FDAM 2:2016)

Tekstilni stroji - Varnostne zahteve - 4. del: Stroji za predelavo preje in stroji za proizvodnjo sukanca in vlaken/niti - Dopolnilo A2 (ISO 11111-4:2005/Amd 2:2016)

General Information

• Status: Published
• Public Enquiry End Date: 09-Mar-2015
• Publication Date: 12-Dec-2016
• ICS: 59.120.99 - Other textile machinery
• Technical Committee: VSN - Safety of machinery
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Dec-2016
• Due Date: 09-Feb-2017
• Completion Date: 13-Dec-2016
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN ISO 11111-4:2005/A2:2016 - Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005/Amd 2:2016)

Relations

• Amends: SIST EN ISO 11111-4:2005 - Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)
• Effective Date: 01-Jan-2017

Overview

The SIST EN ISO 11111-4:2005/A2:2017 standard specifies safety requirements for textile machinery focused on yarn processing, cordage, and rope manufacturing machinery. Prepared jointly by ISO and CEN under the Vienna Agreement, this amendment enhances existing provisions with updated safety protocols and references, ensuring alignment with international safety principles for textile equipment.

This standard is particularly relevant to manufacturers, designers, and users of textile machinery operating within Europe and globally. It complements other standards that address noise emission and risk assessment, consolidating a comprehensive safety framework.

Key Topics

• Safety Requirements for Yarn and Rope Machinery
  The standard defines detailed safety measures tailored specifically to machines involved in yarn processing and cordage/rope production. These focus on hazard identification, risk reduction, and emergency controls.

• Updated Technical References
  Amendment 2 revises references to the foundational ISO 12100 on risk assessment and design principles, ensuring harmonization with the most current guidelines. It replaces earlier dated standards for better clarity and applicability.

• Emergency Stop Devices
  Requirements include the positioning of emergency stop pushbuttons, specifying that at least one such device must be located on each end of the machinery for rapid access in emergencies.

• Machine Types Covered
  The scope incorporates a variety of equipment such as tracked or horn gear machines and rotary-type braiding machines, including both solid and spiral braid configurations, reflecting industry diversity.

• Noise Emission Measures
  This standard is complemented by related type C standards such as ISO 9902 (parts 1 and 4) and ISO/DIS 23771, which cover noise measurement and reduction strategies important for protecting workers’ hearing and complying with environmental regulations.

Applications

• Textile Manufacturing Facilities
  Organizations producing yarns, cords, and ropes can implement this standard to ensure their machinery meets rigorous safety norms, reducing downtime due to accidents and boosting worker confidence.

• Machinery Design and Engineering
  Designers can use the guidance to develop safer equipment incorporating necessary safeguards, emergency controls, and ergonomic considerations that comply with international and European safety directives.

• Compliance and Regulatory Adherence
  The standard aligns with the EU Directive 2006/42/EC (Machinery Directive), granting a presumption of conformity for textile machinery that meet its requirements, facilitating market access within the European Economic Area.

• Noise Control in Textile Machinery
  Manufacturers looking to minimize the noise footprint of yarn and rope processing equipment benefit from the connection to complementary noise reduction standards, ensuring comprehensive health and safety management.

Related Standards

• ISO 12100 – Safety of Machinery
  Provides the general principles for design, risk assessment, and risk reduction, forming the foundation for all safety standards in machinery.

• ISO 11111-1 and ISO 11111-2 – Textile Machinery Safety Parts 1 & 2
  These parts address safety requirements for other categories of textile machines, providing a complete safety system when used alongside Part 4.

• ISO 9902 (Parts 1 and 4)
  Focused on noise emission measurement from machinery, critical for compliance with workplace safety regulations.

• ISO/DIS 23771 – Noise Reduction
  Offers practical methods for reducing noise emissions from textile machinery.

• EU Directive 2006/42/EC (Machinery Directive)
  Governs machine safety compliance in the EU, to which this standard contributes conformity presumption.

---

Adopting SIST EN ISO 11111-4:2005/A2:2017 ensures that yarn processing and rope manufacturing machinery meet stringent international safety and regulatory requirements. This supports sustainable manufacturing practices, workplace safety, and compliance with evolving industry standards worldwide.

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11111-4:2005/oprA2:2015
01-februar-2015
Tekstilni stroji – Varnostne zahteve – 4. del: Stroji za obdelavo preje ter izdelavo
sukanca in vrvi (ISO 11111-4:2005/DAM 2:2014)
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope
manufacturing machinery (ISO 11111-4:2005/DAM 2:2014)
Textilmaschinen - Sicherheitsanforderungen - Teil 4: Garnverarbeitungs-, Seilereiwaren-
und Seilereimaschinen (ISO 11111-4:2005/DAM 2:2014)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 4 : Machines de
transformation du fil et machines de production de cordages et articles de corderie (ISO
11111-4:2005/DAM 2:2014)
Ta slovenski standard je istoveten z: EN ISO 11111-4:2005/prA2:2014
ICS:
59.120.99 Drugi tekstilni stroji Other textile machinery
SIST EN ISO 11111-4:2005/oprA2:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN ISO 11111-4:2005/oprA2:2015

SIST EN ISO 11111-4:2005/oprA2:2015
DRAFT AMENDMENT
ISO 11111-4:2005/DAM 2
ISO/TC 72/SC 8 Secretariat: DIN
Voting begins on: Voting terminates on:

Textile machinery — Safety requirements —
Part 4:
Yarn processing, cordage and rope manufacturing
machinery
AMENDMENT 2
Matériel pour l’industrie textile — Exigences de sécurité —
Partie 4: Machines de transformation du fil et machines de production de cordages et d’articles de corderie
AMENDEMENT 2
ICS: 59.120.20;59.120.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11111-4:2005(E)/DAM 2
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2014

SIST EN ISO 11111-4:2005/oprA2:2015
ISO 11111-4:2005(E)/DAM 2
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2014 – All rights reserved

SIST EN ISO 11111-4:2005/oprA2:2015
ISO 11111-4:2005/DAM 2
Foreword
ISO (the International Organization for Standardization) is a worldwide federation
...

SLOVENSKI STANDARD
01-januar-2017
Tekstilni stroji - Varnostne zahteve - 4. del: Stroji za predelavo preje in stroji za
proizvodnjo sukanca in vlaken/niti - Dopolnilo A2 (ISO 11111-4:2005/Amd 2:2016)
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope
manufacturing machinery - Amendment 2 (ISO 11111-4:2005/Amd 2:2016)
Textilmaschinen - Sicherheitsanforderungen - Teil 4: Garnverarbeitungs-, Seilereiwaren-
und Seilereimaschinen - Änderung 2 (ISO 11111-4:2005/Amd 2:2016)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 4: Machines de
transformation du fil et machines de production de cordages et d'articles de corderie -
Amendement 2 (ISO 11111-4:2005/FDAM 2:2016)
Ta slovenski standard je istoveten z: EN ISO 11111-4:2005/A2:2016
ICS:
59.120.99 Drugi tekstilni stroji Other textile machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11111-4:2005/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2016
EUROPÄISCHE NORM
ICS 59.120.10; 59.120.20
English Version
Textile machinery - Safety requirements - Part 4: Yarn
processing, cordage and rope manufacturing machinery
(ISO 11111-4:2005/Amd 2:2016)
Matériel pour l'industrie textile - Exigences de sécurité Textilmaschinen - Sicherheitsanforderungen - Teil 4:
- Partie 4: Machines de transformation du fil et Garnverarbeitungs-, Seilereiwaren- und
machines de production de cordages et d'articles de Seilereimaschinen (ISO 11111-4:2005/Amd 2:2016)
corderie (ISO 11111-4:2005/Amd 2:2016)
This amendment A2 modifies the European Standard EN ISO 11111-4:2005; it was approved by CEN on 5 May 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11111-4:2005/A2:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC aimed to be covered . 4

European foreword
This document (EN ISO 11111-4:2005/A2:2016) has been prepared by Technical Committee ISO/TC 72
“Textile machinery and accessories” in collaboration with Technical Committee CEN/TC 214 “Textile
machinery and accessories” the secretariat of which is held by SNV.
This Amendment to the European Standard EN ISO 11111-4:2005 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2016,
and conflicting national standards shall be withdrawn at the latest by December 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11111-4:2005/Amd 2:2016 has been approved by CEN as
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request M/396
(Machinery) to provide a means of conforming to essential requirements of the New Approach Directive
2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and
Annex I of Directive 2006/42/EC
Essential Requirements of Cla
...