Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)

This International Standard gives rules for dimensioning and tolerancing non-rigid parts where restraining of features is required during verification of dimensions and tolerances specified on a drawing.

Geometrische Produktspezifikation (GPS) - Bemaßung und Tolerierung - Nicht-formstabile Teile (ISO 10579:2010 + Cor 1:2011)

Diese Internationale Norm legt Regeln für die Bemaßung und Tolerierung nicht-formstabiler Teile fest, bei denen eine Zusatzbedingung der Formelemente für die Prüfung der in einer Zeichnung festgelegten Maße und Toleranzen erforderlich ist.

Spécification géométrique des produits (GPS) - Cotation et tolérancement - Pièces non rigides (ISO 10579:2010, Cor 1:2011 inclus)

L'ISO 10579:2010 spécifie les règles de cotation et de tolérancement des pièces non rigides qui nécessitent la mise sous contrainte de certains éléments lors du contrôle des dimensions et des tolérances spécifiées sur le dessin.

Specifikacija geometrijskih veličin izdelka (GPS) - Dimenzioniranje in toleriranje - Deli, ki niso togi (ISO 10579:2010 + Popravek 1:2011)

Ta mednarodni standard podaja pravila za dimenzioniranje in toleriranje delov, ki niso togi, kadar je med preverjanjem dimenzij in toleranc, navedenih na skici, potrebno omejevanje funkcij.

General Information

Status
Published
Publication Date
26-May-2014
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-May-2014
Due Date
18-Jul-2014
Completion Date
27-May-2014

Buy Standard

Standard
SIST EN ISO 10579:2014 - Popravek ISO 10579:2010/Cor 1:2011 je samo v francoščini, zato ni vključen v SIST (angleška verzija)
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 10579:2014
01-julij-2014

6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND *36 'LPHQ]LRQLUDQMHLQWROHULUDQMH

'HOLNLQLVRWRJL ,623RSUDYHN

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid

parts (ISO 10579:2010 including Cor 1:2011)
Geometrische Produktspezifikation (GPS) - Bemaßung und Tolerierung - Nicht-
formstabile Teile (ISO 10579:2010 + Cor 1:2011)

Spécification géométrique des produits (GPS) - Cotation et tolérancement - Pièces non

rigides (ISO 10579:2010, Cor 1:2011 inclus)
Ta slovenski standard je istoveten z: EN ISO 10579:2013
ICS:
01.100.20 Konstrukcijske risbe Mechanical engineering
drawings
17.040.40 6SHFLILNDFLMDJHRPHWULMVNLK Geometrical Product
YHOLþLQL]GHOND *36 Specification (GPS)
SIST EN ISO 10579:2014 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10579:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 10579:2014
EUROPEAN STANDARD
EN ISO 10579
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2013
ICS 01.100.20
English Version
Geometrical product specifications (GPS) - Dimensioning and
tolerancing - Non-rigid parts (ISO 10579:2010 including Cor
1:2011)

Spécification géométrique des produits (GPS) - Cotation et Geometrische Produktspezifikation (GPS) - Bemaßung und

tolérancement - Pièces non rigides (ISO 10579:2010, Cor Tolerierung - Nicht-formstabile Teile (ISO 10579:2010 +

1:2011 inclus) Cor 1:2011)
This European Standard was approved by CEN on 11 July 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10579:2013: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10579:2014
EN ISO 10579:2013 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 10579:2014
EN ISO 10579:2013 (E)
Foreword

The text of ISO 10579:2010 including Cor 1:2011 has been prepared by Technical Committee ISO/TC 213

“Dimensional and geometrical product specifications and verification” of the International Organization for

Standardization (ISO) and has been taken over as EN ISO 10579:2013 by Technical Committee CEN/TC 290

“Dimensional and geometrical product specification and verification” the secretariat of which is held by

AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at

the latest by January 2014.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO 10579:2010 including Cor 1:2011 has been approved by CEN as a EN ISO 10579:2013

without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 10579:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 10579:2014
INTERNATIONAL ISO
STANDARD 10579
Second edition
2010-03-01
Geometrical product specifications
(GPS) — Dimensioning and tolerancing —
Non-rigid parts
Spécification géométrique des produits (GPS) — Cotation et
tolérancement — Pièces non rigides
Reference number
ISO 10579:2010(E)
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 10579:2014
ISO 10579:2010(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

COPYRIGHT PROTECTED DOCUMENT
© ISO 2010

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10579:2014
ISO 10579:2010(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 10579 was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product

specifications and verification.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.