Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004)

ISO/IEC 17000:2004 specifies general terms and definitions relating to conformity assessment, including the accreditation of conformity assessment bodies, and to the use of conformity assessment to facilitate trade. A description of the functional approach to conformity assessment is included as a further aid to understanding among users of conformity assessment, conformity assessment bodies and their accreditation bodies, in both voluntary and regulatory environments.
ISO/IEC 17000:2004 does not set out to provide a vocabulary for all of the concepts that may need to be used in describing particular conformity assessment activities. Terms and definitions are given only where the concept defined would not be understandable from the general language use of the term or where an existing standard definition is not applicable.

Konformitätsbewertung - Begriffe und allgemeine Grundlagen (ISO/IEC 17000:2004)

Diese Internationale Norm legt allgemeine Begriffe der Konformitätsbewertung, einschließlich der Akkreditierung von Konformitätsbewertungsstellen, und für die Anwendung der Konformitätsbewertung zur Förderung des Warenverkehrs fest. Der Anhang A enthält eine Beschreibung des funktionalen Ansatzes der Konformitätsbewertung und soll für den gesetzlich geregelten wie auch für den freiwilligen Bereich als weitere Hilfe gegenseitigen Verstehens unter den Anwendern der Konformitätsbewertung, Konformitätsbewertungsstellen und ihren Akkreditierungsstellen dienen.
Diese Internationale Norm dient nicht als Vokabular für alle Begriffe, die benötigt werden könnten, um alle Einzelheiten derbesondere Tätigkeiten der Konformitätsbewertung zu beschreiben. Benennungen und ihre Definitionen sind nur dann enthalten, wenn sich der Begriff nicht durch den allgemeinen Sprachgebrauch selbst erklärt oder wenn eine bereits bestehende genormte Definition nicht zutreffend ist.
ANMERKUNG 1   Die Anmerkungen zu den Definitionen verstehen sich als Klarstellungen oder als Beispiele zum besseren Verständnis der Begriffe. In bestimmten Fällen können dürfen die Anmerkungen aus sprachlichen Gründen in verschiedenen Sprachen unterschiedlich sein oder dürfen durch zusätzliche Anmerkungen ergänzt werden.
ANMERKUNG 2   Die Begriffe sind in einer systematischen Reihenfolge geordnet und in einem alphabetischen Stichwortverzeichnis erfasst. Eine Benennung in einer Definition oder Anmerkung, die an anderer Stelle definiert ist, ist fett gedruckt. Ihr folgt die in runde Klammern gesetzte Abschnittsnummer. Eine derartig fett gedruckte Benennung kann in der Definition durch ihre vollständige Definition ersetzt werden.

Evaluation de la conformité - Vocabulaire et principes généraux (ISO/IEC 17000:2004)

ISO/IEC 17000:2004 spécifie des termes généraux et leurs définitions relatifs à l'évaluation de la conformité, y compris l'accréditation des organismes d'évaluation de la conformité, et à l'utilisation de l'évaluation de la conformité pour faciliter le commerce. L'Annexe A comporte une description de l'approche fonctionnelle de l'évaluation de la conformité, destinée à apporter une aide complémentaire à la compréhension entre utilisateurs de l'évaluation de la conformité, organismes d'évaluation de la conformité et leurs organismes d'accréditation dans des contextes tant volontaires que réglementaires.
ISO/IEC 17000:2004 ne vise pas à établir un vocabulaire pour tous les concepts qu'il peut être nécessaire d'utiliser pour décrire des activités d'évaluation de la conformité particulières. Des termes et définitions ne sont donnés que dans le cas où l'utilisation du terme dans son sens courant ne permet pas la compréhension du concept en question ou lorsqu'une définition existante normalisée n'est pas applicable.

Ugotavljanje skladnosti – Slovar in splošna načela (enakovreden z ISO/IEC 17000:2004)

General Information

Status
Withdrawn
Publication Date
31-Dec-2004
Withdrawal Date
13-Jul-2020
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Jul-2020
Due Date
06-Aug-2020
Completion Date
14-Jul-2020

Relations

Buy Standard

Standard
EN ISO IEC 17000:2005
English, French and Russian language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard – translation
EN ISO/IEC 17000:2005
Slovenian, English, German and French language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN ISO/IEC 17000:2005

STANDARD
januar 2005
Ugotavljanje skladnosti – Slovar in splošna načela (ISO/IEC 17000:2004)
(istoveten EN ISO/IEC 17000:2004)
Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004)
ICS 01.040.03; 03.120.20 Referenčna številka
SIST EN ISO/IEC 17000:2005(en,fr,ru)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO/IEC 17000

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2004
ICS 01.040.03; 03.120.20
Supersedes Clauses 12 to 17 of EN 45020:1998
English version
Conformity assessment - Vocabulary and general principles
(ISO/IEC 17000:2004)
Evaluation de la conformité - Vocabulaire et principes Konformitätsbewertung -Begriffe und allgemeine
généraux (ISO/IEC 17000:2004) Grundlagen (ISO/IEC 17000:2004)
This European Standard was approved by CEN and CENELEC on 8 August 2004.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the CEN Management Centre or to any CEN or CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN or CENELEC member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria,
Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.











CEN Management Centre: CENELEC Central Secretariat:
rue de Stassart, 36  B-1050 Brussels rue de Stassart, 35  B-1050 Brussels
© 2004 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 17000:2004 E
worldwide for CEN national Members and for CENELEC
Members.

---------------------- Page: 2 ----------------------

EN ISO/IEC 17000:2004 (E)





Foreword


This document (EN ISO/IEC 17000:2004) has been prepared by Technical Committee
ISO/CASCO "Committee on conformity assessment" in collaboration with Technical Committee
CEN/CLC/TC 1 "Criteria for conformity assessment bodies", the secretariat of which is held by
SN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2005, and conflicting national standards
shall be withdrawn at the latest by May 2005.

This document supersedes Clauses 12 to 17 of EN 45020:1998.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO/IEC 17000:2004 has been approved by CEN and CENELEC as EN ISO/IEC
17000:2004 without any modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO/IEC
STANDARD 17000
NORME
First edition
Première édition
INTERNATIONALE
Первое издание
2004-11-01
МЕЖДУНАРОДНЫЙ
СТАНДАРТ
Conformity assessment — Vocabulary
and general principles
Évaluation de la conformité —
Vocabulaire et principes généraux
Oценка соответствия. Cловарь и
общие принципы





Reference number
Numéro de référence
Номер ссылки
ISO/IEC 17000:2004(E/F/R)
©
 ISO 2004

---------------------- Page: 4 ----------------------

ISO/IEC 17000:2004(E/F/R)

©  ISO 2004
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
Воспроизведение терминов и определений, содержащихся в настоящем Международном стандарте, разрешается в учебных
пособиях, руководствах по эксплуатации, публикациях и журналах технического характера, предназначенных исключительно для
обучения или для практического исполнения. Подобное воспроизведение должно осуществляться на следующих условиях:
термины и определения не должны подвергаться никаким изменениям; воспроизведение запрещается в словарях и других
сходных изданиях, предназначенных для продажи; настоящий Международный стандарт должен цитироваться как
первоисточник.
Кроме вышеперечисленных исключений, никакая другая часть данной публикации не подлежит ни воспроизведению, ни
использованию в какой бы то ни было форме и каким бы то ни было способом, электронным или механическим, включая
фотокопии и микрофильмы, без письменного согласия либо ИСО, которое может быть получено по адресу, приводимому ниже,
либо комитета члена ИСО в стране лица, подающего запрос.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse/Oтпeчaтaнo в Швeйцaрии
ii © ISO 2004 – All rights reserved/Tous droits réservés/Все права сохранены

---------------------- Page: 5 ----------------------

ISO/IEC 17000:2004(E/F/R)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

PDF – Oсвoбoждeниe oт oбязaннoсти
Нaстoящий фaйл PDF мoжeт сoдeржaть интeгрирoвaнныe шрифты. В сooтвeтствии с лицeнзиoнными услoвиями фирмы
Adobe, этoт фaйл мoжeт быть oтпeчaтaн или визуaлизирoвaн, oднaкo oн нe дoлжeн быть измeнeн, зa исключeниeм случaeв,
кoгдa примeняeмый для этoй цeли кoмпьютeр имeeт прaвo нa испoльзoвaниe этиx шрифтoв и eсли эти пoслeдниe
инстaллирoвaны. Зaгружeниeм нaстoящeгo фaйлa зaинтeрeсoвaнныe стoрoны сoглaшaются принять нa сeбя oтвeтствeннoсть
зa сoблюдeниe лицeнзиoнныx услoвий фирмы Adobe. Цeнтрaльный сeкрeтaриaт ИСO нe нeсeт никaкoй oтвeтствeннoсти в
этoм oтнoшeнии.
Adobe являeтся тoргoвым знaкoм фирмы Adobe Systems Incorporated.
Дeтaли, oтнoсящиeся к прoгрaммнoму oбeспeчeнию и испoльзoвaнныe для сoздaния нaстoящeгo фaйлa PDF, мoгут быть
прoкoнсультирoвaны в рубрикe General Info фaйлa; пaрaмeтры для сoздaния PDF были oптимизирoвaны для пeчaти. Были
приняты всe нeoбxoдимыe мeры, чтoбы гaрaнтирoвaть пoльзoвaниe нaстoящим фaйлoм всeми члeнaми ИСO. В рeдкиx
случaяx, кoгдa мoгли бы вoзникнуть прoблeмы испoльзoвaния, прoсьбa инфoрмирoвaть Цeнтрaльный сeкрeтaриaт пo aдрeсу,
привeдeннoму нижe.

© ISO 2004 – All rights reserved/Tous droits réservés/Все права сохранены iii

---------------------- Page: 6 ----------------------

ISO/IEC 17000:2004(E/F/R)
Contents Page
Foreword .vii
0   Introduction.x
1 Scope.1
2 Terms relating to conformity assessment in general .4
3 Basic terms.8
4 Conformity assessment terms relating to selection and determination (see Figure A.1).10
5 Conformity assessment terms relating to review and attestation (see Figure A.1) .12
6 Conformity assessment terms relating to surveillance (see Figure A.1) .16
7 Terms relating to conformity assessment and facilitation of trade.18
Annex A (informative) Principles of conformity assessment.24
Annex B (informative) Related terms defined in other documents .35
Bibliography.37
Alphabetical index.40
French alphabetical index (Index alphabétique) .41
Russian alphabetical index (Алфавитный указатель) .42
German alphabetical index (Alphabetisches Stichwortverzeichnis).43
Spanish alphabetical index (Índice alfabético).44
Italian alphabetical index (Indice alfabetico) .45
Dutch alphabetical index (Alfabetische index) .46
Swedish alphabetical index (Alfabetiskt register) .47

iv © ISO 2004 – All rights reserved/Tous droits réservés/Все права сохранены

---------------------- Page: 7 ----------------------

ISO/IEC 17000:2004(E/F/R)
Sommaire Page
Avant-propos.viii
0   Introduction . xii
1 Domaine d'application. 1
2 Termes relatifs à l'évaluation de la conformité en général .4
3 Termes de base. 8
4 Termes d'évaluation de la conformité relatifs à la sélection et à la détermination
(voir Figure A.1) . 10
5 Termes d'évaluation de la conformité relatifs à la revue et à l'attestation (voir Figure A.1) . 12
6 Termes d'évaluation de la conformité relatifs à la surveillance (voir Figure A.1) . 16
7 Termes relatifs à l'évaluation de la conformité et à la facilitation du commerce. 18
Annexe A (informative) Principes de l'évaluation de la conformité . 24
Annexe B (informative) Termes connexes définis dans d'autres documents. 35
Bibliographie . 37
Index alphabétique anglais (Alphabetical index) . 40
Index alphabétique. 41
Index alphabétique russe (Алфавитный указатель) . 42
Index alphabétique allemand (Alphabetisches Stichwortverzeichnis). 43
Index alphabétique espagnol (Índice alfabético) . 44
Index alphabétique italien (Indice alfabetico). 45
Index alphabétique néerlandais (Alfabetische index). 46
Index alphabétique suédois (Alfabetiskt register). 47

© ISO 2004 – All rights reserved/Tous droits réservés/Все права сохранены v

---------------------- Page: 8 ----------------------

ISO/IEC 17000:2004(E/F/R)
Содержание Стр.
Предисловие .ix
0   Введение .xiv
1 Область применения .1
2 Термины, относящиеся к оценке соответствия в целом .5
3 Основные термины.9
4 Термины по оценке соответствия, относящиеся к выбору и определению
(см. Рисунок А.1).11
5 Термины по оценке соответствия, относящиеся к проверке и подтверждению
соответствия (см. Рисунок А.1) .13
6 Термины по оценке соответствия, относящиеся к инспекционному контролю
(см. Рисунок А.1).17
7 Термины по оценке соответствия, относящиеся к области содействия торговле .19
Приложение А (информативное) Принципы оценки соответствия.24
Приложение Б (информативное) Родственные термины, определенные в других
документах .35
Библиография.37
Английский алфавитный указатель (Alphabetical index) .40
Французский алфавитный указатель (Index alphabétique).41
Алфавитный указатель.42
Немецкий алфавитный указатель (Alphabetisches Stichwortverzeichnis).43
Испанский алфавитный указатель (Índice alfabético).44
Италцянский алфавитный указатель (Indice alfabetico) .45
Голландский алфавитный указатель (Alfabetische index) .46
Шведский алфавитный указатель (Alfabetiskt register).47

vi © ISO 2004 – All rights reserved/Tous droits réservés/Все права сохранены

---------------------- Page: 9 ----------------------

ISO/IEC 17000:2004(E/F/R)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of conformity
assessment, the ISO Committee on conformity assessment (CASCO) is responsible for the
development of International Standards and Guides.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
Draft International Standards adopted by the technical committees are circulated to the member bodies for
voting. Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 17000 was prepared by the ISO Committee on conformity assessment (CASCO).
It was circulated for voting to the national bodies of both ISO and IEC, and was approved by both
organizations.
This first edition cancels and replaces Clauses 12 to 17 of ISO/IEC Guide 2:1996. Clauses 1 to 11 of
ISO/IEC Guide 2 are not the responsibility of ISO/CASCO and are unaffected by this International Standard.

© ISO 2004 – All rights reserved/Tous droits réservés/Все права сохранены vii

---------------------- Page: 10 ----------------------

ISO/IEC 17000:2004(E/F/R)
Avant-propos
L'ISO (Organisation internationale de normalisation) et la CEI (Commission électrotechnique internationale)
forment le système spécialisé de la normalisation mondiale. Les organismes nationaux membres de l'ISO ou
de la CEI participent au développement de Normes internationales par l'intermédiaire des comités techniques
créés par l'organisation concernée afin de s'occuper des domaines particuliers de l'activité technique. Les
comités techniques de l'ISO et de la CEI collaborent dans des domaines d'intérêt commun. D'autres
organisations internationales, gouvernementales et non gouvernementales, en liaison avec l'ISO et la CEI
participent également aux travaux. Dans le domaine de l'évaluation de la conformité, le comité ISO pour
l'évaluation de la conformité (CASCO) est responsable du développement de Normes internationales et de
Guides.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres
pour vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des
comités membres votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO et la CEI ne sauraient être tenues pour
responsables de ne pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO/CEI 17000 a été élaborée par le comité ISO pour l'évaluation de la conformité (CASCO).
Le projet a été soumis aux organismes nationaux de l'ISO et de la CEI pour vote et a été approuvé par les
deux organisations.
Cette première édition annule et remplace les Articles 12 à 17 du Guide ISO/CEI 2:1996. Les Articles 1 à 11
du Guide ISO/CEI 2 ne sont pas de la responsabilité de l'ISO/CASCO et ne sont pas affectés par la présente
Norme internationale.

viii © ISO 2004 – All rights reserved/Tous droits réservés/Все права сохранены

---------------------- Page: 11 ----------------------

ISO/IEC 17000:2004(E/F/R)
Предисловие
ИСО (Международная организация по стандартизации) и МЭК (Международная электротехническая
комиссия) составляют вместе специализированную систему всемирной стандартизации.
Национальные органы - члены ИСО или МЭК - участвуют в разработке Международных стандартов
при посредстве технических комитетов, созданных соответствующей организацией с целью
заниматься работой в отдельных областях технической деятельности. Комитеты-члены ИСО и МЭК
сотрудничают в областях общего интереса. Другие правительственные и неправительственные
международные организации, сотрудничающие с ИСО и МЭК, также принимают участие в этой работе.
В области оценки соответствия комитет ИСО по оценке соответствия (КАСКО) является
ответственным за разработку Международных стандартов и Руководств.
Международные Стандарты разрабатываются в соответствии с правилами, установленными в
Директивах ИСО/МЭК, Часть 2.
Проекты Международных стандартов рассылаются национальным органам на голосование. Их
опубликование в качестве Международных стандартов требует одобрения по меньшей мере 75 %
национальных органов, принимающих участие в голосовании.
Обращается внимание на то, что некоторые элементы настоящего документа могут быть предметами
патентных прав. ИСО и МЭК не могут считаться ответственными за необнаружение любых или всех
существующих патентных прав.
ИСО/МЭК 17000 разработано комитетом ИСО по оценке соответствия (КАСКО)
Проект был направлен на голосование национальным органам ИСО и МЭК, и был одобрен этими
двумя организациями.
Настоящее первое издание отменяет и заменяет Разделы 12 – 17 Руководства ИСО/МЭК 2:1996.
Разделы 1 – 11 Руководства ИСО/МЭК 2 не входят в сферу ответственности ИСО/КАСКО и не
рассматриваются в настоящем Международном стандарте.

© ISO 2004 – All rights reserved/Tous droits réservés/Все права сохранены ix

---------------------- Page: 12 ----------------------

ISO/IEC 17000:2004(E/F/R)
0   Introduction
0.1 Terms and definitions applicable to conformity assessment
ISO and ISO/IEC Guides and, more recently, International Standards relating generically to conformity
assessment activities such as testing, inspection and various forms of certification are prepared by working
groups of the ISO Committee on conformity assessment (CASCO). For many years, ISO/IEC Guide 2, last
revised in 1996, has included a core vocabulary for conformity assessment, built up from a small number of
terms and definitions first compiled to facilitate communication and understanding about product certification
based on standards for traditional manufactured goods.
In 2000, CASCO decided to take conformity assessment terminology (Clauses 12 to 17) out of
ISO/IEC Guide 2 and provide instead a self-contained vocabulary more readily applicable within the planned
ISO/IEC 17000 series of standards and in the drafting or revision of related guides. CASCO Working Group 5,
Definitions, has accordingly prepared this International Standard in consultation with other active CASCO
working groups, as a consistent framework within which more specific concepts may be defined appropriately
and denoted by the most appropriate terms. Extra terms for concepts unique to particular activities within
conformity assessment, such as accreditation, certification of persons and marks of conformity, are found in
the International Standard or Guide related to that activity. Such concepts are not included in this International
Standard.
Until pre-existing CASCO publications are revised, the terminology used in those documents remains valid in
its context; this International Standard is not intended to be applied retrospectively.
Conformity assessment interacts with other fields such as management systems, metrology, standardization
and statistics. This International Standard does not define the boundaries of conformity assessment. These
remain elastic.
0.2 Terms and definitions applicable to trade policy
Clause 7 includes some terms and definitions, drawn mainly from the superseded clauses of
ISO/IEC Guide 2, for several broader concepts. These are intended not only to standardize usage within the
conformity assessment community, but also to help policy makers concerned with the facilitation of trade
within regulatory and international treaty frameworks.
0.3 A functional approach to conformity assessment
The terms and definitions specified in this International Standard, particularly under Clauses 4 and 5, reflect
the adoption by CASCO in November 2001 of the functional approach recommended earlier that year in the
final report of a CASCO – CEN/CENELEC TC 1 joint working group.
To provide a better understanding of the defined concepts, their grouping and their relationships, a description
of the functional approach is included in Annex A for information.
0.4 Selection of terms and definitions
Some of the terms included in this International Standard relate to concepts it was considered essential to
define. Others it was thought helpful to explain. Many of the general terms used to distinguish conformity
assessment concepts are used in common language in a broader sense or with a wider range of meanings.
Some also appear in other standard vocabularies with definitions specific to the relevant field of application.
An alphabetical index lists the terms defined in this International Standard. Standards defining other relevant
terms are given in Annex B with separate alphabetical lists. First are terms applicable to specific aspects of
conformity assessment, as defined in other standards in the ISO/IEC 17000 series. Second are terms for
which the
...

SLOVENSKI SIST EN ISO/IEC 17000

STANDARD
januar 2005












Ugotavljanje skladnosti – Slovar in splošna načela
(istoveten z EN ISO/IEC 17000:2004)

Conformity assessment – Vocabulary and general principles
(ISO/IEC 17000:2004)

Evaluation de la conformité – Vocabulaire et principes généraux
(ISO/IEC 17000:2004)

Konformitätsbewertung – Begriffe und allgemeine Grundlagen
(ISO/IEC 17000:2004)





















Referenčna oznaka
ICS 01.040.03; 03.120.20 SIST EN ISO/IEC 17000:2005 (sl,en,fr,de)


Nadaljevanje na straneh II in od 1 do 55



© 2005-12. Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO/IEC 17000 : 2005
NACIONALNI UVOD

Standard SIST EN ISO/IEC 17000 (sl,en), Ugotavljanje skladnosti – Slovar in splošna načela
(ISO/IEC 17000:2004), 2005, ima status slovenskega standarda in je istoveten z evropskim
standardom EN ISO/IEC 17000 (en,fr,de), Conformity assessment – Vocabulary and general
principles (ISO/IEC 17000:2004), november 2004.

NACIONALNI PREDGOVOR
Evropski standard EN ISO/IEC 17000:2004 je pripravil tehnični odbor ISO/CASCO "Odbor za
ugotavljanje skladnosti" v sodelovanju s tehničnim odborom CEN/CLC/TC 1 "Merila za organe za
ugotavljanje skladnosti", katerega sekretariat vodi SN.

Slovenski standard SIST EN ISO/IEC 17000:2005 je prevod evropskega standarda EN ISO/IEC
17000:2004. V primeru spora glede besedila slovenskega prevoda v tem standardu je odločilen izvirni
evropski standard v angleškem jeziku. Slovensko izdajo standarda je pripravil tehnični odbor SIST/TC
UGA Ugotavljanje skladnosti.
Odločitev za privzem tega standarda je dne 13.12.2005sprejel SIST/TC UGA Ugotavljanje skladnosti.
ZVEZE S STANDARDI
S privzemom tega standarda veljajo za omejeni namen referenčnih standardov vsi standardi,
navedeni v izvirniku, razen tistih, ki so že sprejeti v nacionalno standardizacijo:
SIST EN ISO 9000:2004 Sistemi vodenja kakovosti – Osnove in slovar (ISO 9000:2000)
SIST EN ISO/IEC 17024:2004  Ugotavljanje skladnosti - Splošne zahteve za organe na področju
certificiranja osebja (ISO/IEC 17024:2003)
SIST EN ISO/IEC 17011:2004  Ugotavljanje skladnosti – Splošne zahteve za akreditacijske organe,
ki akreditirajo organe za ugotavljanje skladnosti (ISO/IEC
17011:2004)
OSNOVA ZA IZDAJO STANDARDA
– Privzem standarda EN ISO/IEC 17000 :2004
OPOMBE
– Povsod, kjer se v besedilu standarda uporablja izraz "evropski" oziroma "mednarodni standard”, v
SIST EN ISO/IEC 17000:2005 to pomeni “slovenski standard”.
– Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.
– Ta nacionalni dokument je istoveten z EN ISO/IEC 17000:2004 in je objavljen z dovoljenjem
  CEN
  Rue de Stassart 36
  1050 Bruselj
  Belgija

This national document is identical with EN ISO/IEC 17000:2004 and is published with the
permission of

  CEN
  Rue de Stassart, 36
  1050 Bruxelles
  Belgium
II

---------------------- Page: 2 ----------------------

EVROPSKI STANDARD EN ISO/IEC 17000
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM november 2004
ICS 01.040.03; 03.120.20 Nadomešča EN 45020:1998


Slovenska izdaja


Ugotavljanje skladnosti – Slovar in splošna načela
(ISO/IEC 17000:2004)

Conformity assessment – Evaluation de la conformité – Konformitätsbewertung –
Vocabulary and general Vocabulaire et principes Begriffe und allgemeine
principles généraux Grundlagen
(ISO/IEC 17000:2004) (ISO/IEC 17000:2004) (ISO/IEC 17000:2004)




Ta evropski standard sta CEN in CENELEC odobrila dne 8. avgusta 2004.

Člani CEN in CENELEC morajo izpolnjevati notranje predpise CEN/CENELEC, s katerimi je
predpisano, da mora biti ta standard brez kakršnihkoli sprememb sprejet kot nacionalni standard.
Seznami najnovejših izdaj teh nacionalnih standardov in njihovi bibliografski podatki so na voljo pri
centralnem sekretariatu ali članicah CEN ali CENELEC.

Evropski standardi obstajajo v treh izvirnih izdajah (nemški, angleški in francoski). Izdaje v drugih
jezikih, ki jih članice CEN in CENELEC na lastno odgovornost prevedejo in izdajo ter prijavijo pri
centralnem sekretariatu CEN, veljajo kot uradne izdaje.

Člani CEN in CENELEC so nacionalni organi za standarde in nacionalni elektrotehniški komiteji
Avstrije, Belgije, Cipra, Češke republike, Danske, Estonije, Finske, Francije, Grčije, Irske, Islandije,
Italije, Latvije, Litve, Luksemburga, Madžarske, Malte, Nemčije, Nizozemske, Norveške, Poljske,
Portugalske, Slovaške, Slovenije, Španije, Švedske, Švice in Združenega kraljestva.






CEN
Evropski komite za standardizacijo
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung

CENELEC
Evropski komite za standardizacijo v elektrotehniki
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Centralni sekretariat: Rue de Stassart, 36 B-1050 Brussels

© 2004 Lastnice avtorskih pravic so vse države članice CEN in CENELEC. Ref. oznaka EN ISO/IEC 17000:2004 E

---------------------- Page: 3 ----------------------

SIST EN ISO/IEC 17000 : 2005
VSEBINA Stran CONTENTS Page
Predgovor . 4 Foreword .4
0 Uvod.4 0 Introduction .4
1 Področje uporabe . 12 1 Scope .12
2 Izrazi, povezani z ugotavljanjem  2 Terms relating to conformity
skladnosti na splošno . 12 assessment in general .12
3 Osnovni izrazi. 16 3 Basic terms.16
4 Izrazi s področja ugotavljanja skladnosti, 4 Conformity assessment terms relating
povezani z izbiranjem in ugotavljanjem. 18 to selection and determination .18
5 Izrazi s področja ugotavljanja skladnosti, 5 Conformity assessment terms relating
povezani s pregledom in potrditvijo . 20 to review and attestation .20
6 Izrazi s področja ugotavljanja skladnosti, 6 Conformity assessment terms relating
povezani z nadzorovanjem. 22 to surveillance .22
7 Izrazi, povezani z ugotavljanjem  7 Terms relating to conformity
skladnosti in pospeševanjem  assessment and facilitation
trgovine. 24 of trade .24
Dodatek A (informativni): Načela  Annex A (informative) Principles of
ugotavljanja skladnosti. 28 conformity assessment.28
Dodatek B (informativni): Sorodni izrazi,  Annex B (informative) Related terms
opredeljeni v drugih dokumentih. 44 defined in other documents .44
Bibliografija . 48 Bibliography.48
Abecedni seznam izrazov. 52 Alphabetical index .53

2

---------------------- Page: 4 ----------------------

SIST EN ISO/IEC 17000 : 2005

Sommaire Page Inhalt Seite
Avant-propos . 5 Vorwort.5
0 Introduction. 5i 0 Einleitung.5
1 Domaine d'application . 13 1 Anwendungsbereich.13
2 Termes relatifs à l'évaluation de la  2 Begriffe zu Konformitätsbewertung
conformité en général. 13 im Allgemeinen.13
3 Termes de base . 17 3 Grundbegriffe .17
4 Termes d'évaluation de la conformité  4 Begriffe der Konformitätsbewertung
relatifs à la sélection et à la détermination 19 zu Auswahl und Ermittlung .19
5 Termes d'évaluation de la conformité  5 Begriffe der Konformitätsbewertung
relatifs à la revue et à l'attestation. 21 zu Bewertung und Bestätigung.21
6 Termes d'évaluation de la  6 Begriffe der Konformitätsbewertung
conformité relatifs à la surveillance . 23 zu Überwachung .23
7 Termes relatifs à l'évaluation de la  7 Begriffe zu Konformitätsbewertung
conformité et à la facilitation und Erleichterung
du commerce. 25 des Handels .25
Annexe A (informative) Principes de  Anhang A (informativ) Grundlagen
l'évaluation de la conformité. 29 der KonformitätsbewertungError! Bookmark
Annexe B (informative) Termes connexes  Anhang B (informativ) Verwandte Begriffe
définis dans d'autres documents. 45 in anderen Dokumenten.45
Bibliographie. 49 Literaturhinweise .49
Index alphabétique . 54 Alphabetisches Stichwortverzeichnis.55


3

---------------------- Page: 5 ----------------------

SIST EN ISO/IEC 17000 : 2005


Predgovor Foreword
Ta standard (EN ISO/IEC 17000:2004) je This document (EN ISO/IEC 17000:2004) has
pripravil tehnični odbor ISO/CASCO "Odbor za been prepared by Technical Committee
ugotavljanje skladnosti" v sodelovanju s ISO/CASCO "Committee on conformity
tehničnim odborom CEN/CLC/TC 1 "Merila za assessment" in collaboration with Technical
organe za ugotavljanje skladnosti", katerega Committee CEN/CLC/TC 1 "Criteria for
sekretariat vodi SN. conformity assessment bodies", the secretariat
of which is held by SN.
Ta evropski standard mora dobiti status This European Standard shall be given the
nacionalnega standarda z objavo istovetnega status of a national standard, either by
besedila ali z razglasitvijo najpozneje do maja publication of an identical text or by
2005. Nacionalne standarde, ki so v nasprotju s endorsement, at the latest by May 2005, and
tem standardom, je treba umakniti najpozneje conflicting national standards shall be withdrawn
do maja 2005. at the latest by May 2005.
Ta evropski standard nadomešča EN 45020:1998. This document supersedes EN 45020:1998.

V skladu z notranjimi predpisi CEN/CENELEC According to the CEN/CENELEC Internal
morajo ta evropski standard obvezno uvesti Regulations, the national standards
nacionalne organizacije za standarde organizations of the following countries are
naslednjih držav: Avstrije, Belgije, Cipra, Češke bound to implement this European Standard:
republike, Danske, Estonije, Finske, Francije, Austria, Belgium, Cyprus, Czech Republic,
Grčije, Islandije, Irske, Italije, Latvije, Litve, Denmark, Estonia, Finland, France, Germany,
Luksemburga, Madžarske, Malte, Nemčije, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Nizozemske, Norveške, Poljske, Portugalske, Lithuania, Luxembourg, Malta, Netherlands,
Slovaške, Slovenije, Španije, Švedske, Švice in Norway, Poland, Portugal, Slovakia, Slovenia,
Združenega kraljestva. Spain, Sweden, Switzerland and United
Kingdom.

Opomba ob razglasitvi standarda Endorsement notice
Besedilo standarda ISO/IEC 17000:2004 sta The text of ISO/IEC 17000:2004 has been
CEN in CENELEC odobrila kot EN ISO/IEC approved by CEN and CENELEC as EN
17000:2004 brez sprememb. ISO/IEC 17000:2004 without any modifications.
0 Uvod 0 Introduction
0.1 Izrazi in definicije, ki se nanašajo na 0.1 Terms and definitions applicable to
ugotavljanje skladnosti conformity assessment
Vodila ISO in ISO/IEC ter v novejšem času ISO and ISO/IEC Guides and, more recently,
mednarodne standarde, ki so na splošno International Standards relating generically to
povezani z aktivnostmi ugotavljanja skladnosti, conformity assessment activities such as testing,
kot so preskušanje, kontrola in različne vrste inspection and various forms of certification are
certificiranja, pripravljajo delovne skupine prepared by working groups of the ISO
Odbora ISO za ugotavljanje skladnosti Committee on conformity assessment (CASCO).
(CASCO). Vodilo ISO/IEC 2, nazadnje revidirano For many years, ISO/IEC Guide 2, last revised in
leta 1996, že več let vsebuje krajši slovar 1996, has included a core vocabulary for
ključnih besed s področja ugotavljanja conformity assessment, built up from a small
skladnosti in njihove definicije, prvotno zbrane, number of terms and definitions first compiled to
da bi olajšale komunikacijo in razumevanje facilitate communication and understanding
certificiranja proizvodov na podlagi standardov about product certification based on standards
za običajne industrijske izdelke. for traditional manufactured goods.


4

---------------------- Page: 6 ----------------------

SIST EN ISO/IEC 17000 : 2005

Avant-propos Vorwort
Le présent document (EN ISO/IEC 17000:2004) Dieses Dokument (EN ISO/IEC 17000:2004)
a été élaboré par le Comité Technique wurde vom Technischen Komitee ISO/CASCO
ISO/CASCO "Comité pour l'évaluation de la „Committee on conformity assessment“ in
conformité" en collaboration avec le comité Zusammenarbeit mit dem Technischen Komitee
technique CEN/CLC/TC 1 "Criteria for conformity CEN/CENELEC/TC 1 „Kriterien für Konformitäts-
assessment bodies" dont le secrétariat est tenu begutachtungsstellen“ erarbeitet, dessen
par le SN. Sekretariat vom NSF gehalten wird.
Cette Norme européenne devra recevoir le statut Diese Europäische Norm muss den Status eine
de norme nationale, soit par publication d'un nationalen Norm erhalten, entweder durc
texte identique, soit par entérinement, au plus Veröffentlichung eines identischen Textes ode
tard en mai 2005, et toutes les normes durch Anerkennung bis Mai 2005, und etwaig
nationales en contradiction devront être retirées entgegenstehende nationale Normen müssen bi
au plus tard en mai 2005. Mai 2005 zurückgezogen werden.
Le présent document remplace l'EN 45020:1998. Dieses Dokument ersetzt die Abschnitte 12 bis
17 der EN 45020:1998-02.
Selon le Règlement Intérieur du Entsprechend der CEN/CENELEC-Geschäfts-
CEN/CENELEC, les instituts de normalisation ordnung sind die nationalen Normungsinstitute
nationaux des pays suivants sont tenus de der folgenden Länder gehalten, diese
mettre cette Norme européenne en application: Europäische Norm zu übernehmen: Belgien,
Allemagne, Autriche, Belgique, Chypre, Dänemark, Deutschland, Estland, Finnland,
Danemark, Espagne, Estonie, Finlande, France, Frankreich, Griechenland, Irland, Island, Italien,
Grèce, Hongrie, Irlande, Islande, Italie, Lettonie, Lettland, Litauen, Luxemburg, Malta,
Lituanie, Luxembourg, Malte, Norvège, Pays- Niederlande, Norwegen, Österreich, Polen,
Bas, Pologne, Portugal, République Tchèque, Portugal, Schweden, Schweiz, Slowakei,
Royaume-Uni, Slovaquie, Slovénie, Suède et Slowenien, Spanien, Tschechische Republik,
Suisse. Ungarn und Vereinigtes Königreich und Zypern.
Notice d'entérinement Anerkennungsnotiz
Le texte de l'ISO/IEC 17000:2004 a été approuvé Der Text von ISO/IEC 17000:2004 wurde vom
par le CEN et le CENELEC comme EN ISO/IEC CEN und von CENELEC als EN ISO/IEC 17000:
17000:2004 sans aucune modification. 2004 ohne irgendeine Abänderung genehmigt.
0 Introduction 0 Einleitung
0.1 Termes et définitions applicables à 0.1 Begriffe für die Konformitätsbewertung
l'évaluation de la conformité

Les Guides ISO et ISO/CEI et, plus récemment, ISO- und ISO/IEC-Leitfäden und in letzter Zeit
les Normes internationales se rapportant de Internationale Normen mit grundsätzlichem Bezug
façon générique aux activités d'évaluation de la auf Tätigkeiten der Konformitätsbewertung wie
conformité telles que les essais, l'inspection et z. B. Prüfung, Inspektion und verschiedene
diverses formes de certification sont élaborés Formen der Zertifizierung werden durch
par des groupes de travail du comité Arbeitsgruppen des ISO Committee on
ISO/CASCO pour l'évaluation de la conformité. Conformity Assessment (ISO/CASCO) erarbeitet.
Pendant de nombreuses années, le Guide Für viele Jahre hat der letztmalig 1996
ISO/CEI 2, révisé pour la dernière fois en 1996, überarbeitete ISO/IEC Guide 2 in den Abschnitten
a inclus un vocabulaire de base pour 12 bis 17 die Grundbegriffe der Konformitäts-
l'évaluation de la conformité, bâti à partir d'un bewertung enthalten, die ausgehend von einer
petit nombre de termes et définitions dont la kleinen Anzahl von Begriffen ursprünglich
compilation visait en premier lieu à faciliter la zusammengestellt wurden, um die Kommunikation
communication et la compréhension de la und das Verständnis bei der Produktzertifizierung,
certification de produits basée sur des normes die sich auf Normen für traditionell hergestellte
pour des produits manufacturés traditionnels. Waren gründete, zu fördern.
5

---------------------- Page: 7 ----------------------

SIST EN ISO/IEC 17000 : 2005

Leta 2000 se je CASCO odločil, da bo izrazje s In 2000, CASCO decided to take conformity
področja ugotavljanja skladnosti (točke od 12 do assessment terminology (Clauses 12 to 17) out
17) izločil iz Vodila ISO/IEC 2 in namesto tega of ISO/IEC Guide 2 and provide instead a self-
izdelal samostojen slovar, ki bo bolj uporaben pri contained vocabulary more readily applicable
seriji standardov ISO/IEC 17000 ter pri pripravi within the planned ISO/IEC 17000 series of
ali revidiranju z njimi povezanih vodil. Skladno s standards and in the drafting or revision of
to odločitvijo je delovna skupina 5 Definicije pri related guides. CASCO Working Group 5,
CASCO po posvetu z drugimi aktivnimi Definitions, has accordingly prepared this
delovnimi skupinami CASCO pripravila ta International Standard in consultation with other
mednarodni standard kot enoten okvir, v katerem active CASCO working groups, as a consistent
je mogoče ustrezno opredeliti bolj specifične framework within which more specific concepts
pojme in jih poimenovati z najustreznejšimi may be defined appropriately and denoted by
izrazi. Posebne izraze za pojme, ki so za the most appropriate terms. Extra terms for
posamezne aktivnosti v okviru ugotavljanja concepts unique to particular activities within
skladnosti edinstveni, kot so npr. akreditacija, conformity assessment, such as accreditation,
certificiranje oseb in znaki skladnosti, je mogoče certification of persons and marks of conformity,
najti v mednarodnem standardu ali v vodilu, ki se are found in the International Standard or Guide
na to aktivnost nanaša. Taki pojmi niso vključeni related to that activity. Such concepts are not
v ta mednarodni standard. included in this International Standard.

Izrazje, uporabljeno v dosedanjih dokumentih Until pre-existing CASCO publications are
CASCO, ostane v kontekstu ugotavljanja revised, the terminology used in those
skladnosti veljavno do revizije teh dokumentov. documents remains valid in its context; this
Ta mednarodni standard ne velja za nazaj. International Standard is not intended to be
applied retrospectively.
Ugotavljanje skladnosti medsebojno vpliva na Conformity assessment interacts with other
druga področja, kot so sistemi vodenja, fields such as management systems,
meroslovje, standardizacija in statistika. S tem metrology, standardization and statistics. This
mednarodnim standardom niso postavljene International Standard does not define the
meje ugotavljanja skladnosti, ki še naprej boundaries of conformity assessment. These
ostajajo prožne. remain elastic.
0.2 Izrazi in definicije, ki se nanašajo na 0.2 Terms and definitions applicable to
trgovinsko politiko trade policy
Sedma točka vsebuje nekaj izrazov in definicij, Clause 7 includes some terms and definitions,
ki v glavnem izhajajo iz poglavij Vodila ISO/IEC drawn mainly from the superseded clauses of
2 in jih ta standard nadomešča, vendar se ISO/IEC Guide 2, for several broader concepts.
uporabljajo v širšem pomenu. Njihov namen ni These are intended not only to standardize
samo standardizirati uporabo na področju usage within the conformity assessment
ugotavljanja skladnosti, temveč tudi pomagati community, but also to help policy makers
tistim, ki ustvarjajo politiko olajševanja trgovine concerned with the facilitation of trade within
v okviru zakonodaje in mednarodnih pogodb. regulatory and international treaty frameworks.


6

---------------------- Page: 8 ----------------------

SIST EN ISO/IEC 17000 : 2005

En 2000, le CASCO a décidé de retirer du Guide Im Jahre 2000 entschied ISO/CASCO, die
ISO/CEI 2 la terminologie de l'évaluation de la Terminologie für die Konformitätsbewertung
conformité (Articles 12 à 17) et de fournir à la (Abschnitte 12 bis 17) aus dem ISO/IEC Guide 2
place un vocabulaire indépendant, plus facilement herauszunehmen und stattdessen ein in sich
applicable dans la série de normes ISO/CEI abgeschlossenes Dokument für die geplante
17000 en projet et dans la rédaction ou la révision Normenreihe ISO/IEC 17000 und für die
de guides connexes. Le groupe de travail GT 5 du Erarbeitung und Überarbeitung der zugehörigen
CASCO, Définitions, a en conséquence préparé ISO/IEC Guides zu erarbeiten. Die ISO/CASCO-
la présente Norme internationale en concertation Arbeitsgruppe 5 „Begriffe“ hat dementsprechend
avec d'autres groupes de travail actifs du diese Internationale Norm in Zusammenarbeit mit
CASCO, en vue de disposer d'un cadre cohérent den anderen aktiven Arbeitsgruppen von
au sein duquel il est possible de définir et de ISO/CASCO als ein einheitliches Rahmenwerk
dénoter des concepts plus spécifiques à l'aide des erstellt, innerhalb dessen spezifische Begriffe
termes les plus appropriés. Des termes zutreffend definiert und durch die am ehesten
supplémentaires employés pour des concepts passenden Benennungen bezeichnet werden
propres à des activités particulières faisant partie können. Zusätzliche Benennungen für Begriffe,
de l'évaluation de la conformité, telles que die für besondere Tätigkeiten bei der
l'accréditation, la certification de personnes et les Konformitäts-bewertung wie Akkreditierung,
marques de conformité, se trouvent dans la Zertifizierung von Personen und Konformitäts-
Norme internationale ou dans le Guide relatifs à zeichen einzigartig sind, sind Internationalen
cette activité. Ces concepts ne figurent pas dans Normen oder Leitfäden zu entnehmen, die sich
la présente Norme internationale. auf diese Tätigkeiten beziehen. Solche Begriffe
sind in dieser Internationalen Norm nicht
enthalten.
La terminologie employée dans les publications Bis vorhandene Veröffentlichungen von CASCO
CASCO antérieures reste valable dans son überarbeitet sind, sind die in diesen Dokumenten
contexte jusqu'à leur révision; la présente Norme verwendeten Begriffe in ihrem Kontext weiterhin
internationale n'est pas destinée à être appliquée gültig, da diese Internationale Norm nicht
de façon rétroactive. rückwirkend angewendet werden soll.
L'évaluation de la conformité présente des Konformitätsbewertung steht in Wechselwirkung
interactions avec d'autres domaines tels que les mit anderen Gebieten wie Managementsysteme,
systèmes de management, la métrologie, la Messtechnik, Normung und Statistik. Diese
normalisation et la statistique. La présente Norme Internationale Norm legt nicht die Grenzen der
internationale ne définit pas les limites de Konformitätsbewertung fest. Diese bleiben
l'évaluation de la conformité. Celles-ci restent dehnbar.
élastiques.
0.2 Termes et définitions applicables à la 0.2 Begriffe für die Handelspolitik
politique du commerce
L'Article 7 contient quelques termes et définitions Abschnitt 7 enthält einige Begriffe für verschiedene
relatifs à plusieurs concepts plus généraux, issus breitere Anwendungen, die hauptsächlich aus den
principalement de la révision des articles du nun durch diese Norm ersetzten Abschnitten des
Guide ISO/CEI 2. Ils sont destinés non seulement ISO/IEC Guide 2 stammen. Diese Begriffe sind
à en normaliser l'usage au sein de la nicht ausschließlich für die Vereinheitlichung des
communauté de l'évaluation de la conformité, Gebrauchs für die Konformitätsbewertung
mais aussi à assister les dirigeants concernés par gedacht, sondern sollen auch als Hilfe für
la facilitation du commerce dans le cadre de la Entscheidungs-träger der Handelspolitik dienen,
réglementation et des traités internationaux. die sich mit der Erleichterung des Handels im
Umfeld von Gesetzgebung und internationalen
Vereinbarungen befassen.
7

---------------------- Page: 9 ----------------------

SIST EN ISO/IEC 17000 : 2005

0.3 Funkcionalni pristop k ugotavljanju 0.3 A functional approach to conformity
skladnosti assessment
Izrazi in definicije iz tega mednarodnega The terms and definitions specified in this
standarda, zlasti tisti v 4. in 5. točki, so odraz Interna-tional Standard, particularly under
funkcionalnega pristopa, ki ga je delovna Clauses 4 and 5, reflect the adoption by
skupina CASCO sprejela novembra 2001 na CASCO in November 2001 of the functional
podlagi predhodnega priporočila skupne delovne approach recommended earlier that year in the
skupine CASCO – CEN/CENELEC TC 1. final report of a CASCO - CEN/CENELEC TC 1
joint working group.
Za boljše razumevanje opredeljenih pojmov, To provide a better understanding of the
njihovega razvrščanja v skupine in medsebojnih defined concepts, their grouping and their
povezav je v dodatku A kot informacija podan relationships, a description of the functional
opis funkcionalnega pristopa. approach is included in Annex A for information.
0.4 Izbira izrazov in definicij 0.4 Selection of terms and definitions
Nekateri izmed izrazov, vključeni v ta Some of the terms included in this International
mednarodni standard, so povezani s pojmi, za Standard relate to concepts it was considered
katere se je ocenilo, da jih je treba opredeliti. Za essential to define. Others it was thought
druge je veljalo mnenje, da je njihova helpful to explain. Many of the general terms
obrazložitev koristna. Veliko splošnih izrazov, used to distinguish conformity assessment
uporabljenih za razlikovanje pojmov na področju concepts are used in common language in a
ugotavljanja skladnosti, se v vsakdanjem jeziku broader sense or with a wider range of
uporablja v širšem pomenu ali s širšim obsegom meanings. Some also appear in other standard
pomenov. Nekateri se pojavljajo tudi v drugih vocabularies with definitions specific to the
slovarjih standardov z definicijami, ki so relevant field of application.
specifične za določeno področje uporabe.
Izrazi, opredeljeni v tem mednarodnem An alphabetical index lists the terms defined in
standardu, so našteti v abecednem seznamu. this International Standard. Standards defining
Standardi, ki opredeljujejo druge pomembne other relevant terms are given in Annex B with
izraze, so navedeni v dodatku B po ločenih separate alphabetical lists. First are terms
abecednih seznamih. Na prvem mestu so izrazi, applicable to specific aspects of conformity
ki se nanašajo na specifične vidike ugotavljanja assessment, as defined in other standards in
skladnosti in so opredeljeni v drugih standardih iz the ISO/IEC 17000 series. Second are terms for
skupine ISO/IEC 17000. Na drugem mestu so which the definitions given in either the
izrazi, katerih definicije, podane v Mednarodnem International vocabulary of basic and general
slovarju osnovnih in splošnih izrazov s področja terms in metrology (VIM) or ISO 9000 are
meroslovja (VIM) ali v standardu ISO 9000, so generally applicable in conformity assessment
splošno veljavne tudi za področje ugotavljanja contexts. For the terms "procedure" and
skladnosti. Za izraza "postopek" in "proizvod", ki "product", both used extensively in other
se oba na široko uporabljata v drugih definicijah, definitions, the ISO 9000:2000 definitions are
smo v točkah 3.2 in 3.3 ponovili definicije iz reproduced in 3.2 and 3.3.
standarda ISO 9000:2000.
0.5 Spremembe izrazja 0.5 Changes in terminology
Opozorili bi na pomembne spremembe izrazov Attention is drawn to significant changes in the
oziroma njihovih definicij iz tistih točk Vodila terms or their definitions from the superseded
ISO/IEC 2, ki jih nadomešča ta standard. clauses of ISO/IEC Guide 2.

8

---------------------- Page: 10 ----------------------

SIST EN ISO/IEC 17000 : 2005

0.3 Approche fonctionnelle de l'évaluation 0.3 Funktionaler Ansatz zur
de la conformité Konformitätsbewertung
Les termes et définitions spécifiés dans la Die in dieser Internationalen Norm festgelegten
présente Norme internationale, en particulier Begriffe, besonders die in den Abschnitten 4 und
dans les Articles 4 et 5, reflètent l'adoption en 5, berücksichtigen den Beschluss zur Annahme
novembre 2001 par le CASCO de l'approche des funktionalen Ansatzes durch ISO/CASCO im
fonctionnelle qui avait été recommandée November 2001 aufgrund der damals
auparavant cette année-là dans le rapport final vorliegenden Empfehlung im Abschlussbericht
d'un groupe de travail joint CASCO-CEN/ der gemeinsamen Arbeitsgru
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.