SIST-TS CEN/TS 17152-3:2023
(Main)Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme
This document gives guidance for requirements for the AoC of materials, compounds, formulations, products, and assemblies in accordance with the applicable part(s) of EN 17152 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE Annex B contains a summary of tests for TT and surveillance monitoring.
In conjunction with EN 17152-1 (see Foreword) this document is applicable to Boxes used for infiltration, attenuation and storage systems.
Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Entwässerung für Nicht-Trinkwasser - Versickerungsblöcke zur Verwendung in Infiltrations-, Zwischenspeicher- und Speichersystemen - Teil 3: Beurteilung der Konformität
Dieses Dokument enthält einen Leitfaden mit Anforderungen für die Beurteilung der Konformität von Werkstoffen, Formmassen, Zusammensetzungen, Erzeugnissen und Bauteilkombinationen nach dem/den jeweils anwendbaren Teil(en) von EN 17152, die als Bestandteil des Qualitätsmanagementsystems im Qualitätssicherungsplan des Herstellers und für die Ein¬führung von Zertifizierungsverfahren vorgesehen sind.
ANMERKUNG Anhang B, Tabelle B.1, enthält eine Zusammenfassung der Prüfungen für die Typprüfung und die Überwachung.
In Verbindung mit EN 17152 1 (siehe Europäisches Vorwort) ist dieses Dokument anwendbar für Versickerungsblöcke, die für die Verwendung in Systemen zur Infiltration, Zwischenspeicherung und Speicherung vorgesehen sind.
Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans pression de l’eau non potable - Structures alvéolaires ultra-légères pour les systèmes d’infiltration, de rétention et de stockage - Partie 3 : Évaluation de la conformité
Cevni sistemi iz polimernih materialov za breztlačni prenos in shranjevanje nepitne vode - Zaboji za sisteme infiltriranja, reduciranja in hrambe - 3. del: Ugotavljanje skladnosti
Ta dokument vsebuje navodila glede zahtev za ugotavljanje skladnosti (AoC) materialov, spojin, formulacij, izdelkov in sestavov z ustreznimi deli standarda EN 17152, ki naj bi se vključila v poslovnik kakovosti proizvajalca kot del sistema vodenja kakovosti, vsebuje pa tudi navodila za vzpostavitev postopka certificiranja.
OPOMBA: Dodatek B vsebuje povzetek preskusov za tipsko preskušanje (TT) in nadzorno spremljanje.
Ta dokument se v povezavi s standardom EN 17152-1 (glej Predgovor) uporablja za zaboje za sisteme infiltriranja, reduciranja in hrambe.
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17152-3:2023
01-februar-2023
Cevni sistemi iz polimernih materialov za breztlačni prenos in shranjevanje
nepitne vode - Zaboji za sisteme infiltriranja, reduciranja in hrambe - 3. del:
Ugotavljanje skladnosti
Plastics piping systems for non-pressure underground conveyance and storage of non-
potable water - Boxes used for infiltration, attenuation and storage systems - Part 3:
Conformity assessment scheme
Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Entwässerung für Nicht-
Trinkwasser - Versickerungsblöcke zur Verwendung in Infiltrations-, Zwischenspeicher-
und Speichersystemen - Teil 3: Beurteilung der Konformität
Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans
pression de l’eau non potable - Structures alvéolaires ultra-légères pour les systèmes
d’infiltration, de rétention et de stockage - Partie 3 : Évaluation de la conformité
Ta slovenski standard je istoveten z: CEN/TS 17152-3:2022
ICS:
23.040.03 Cevovodi za zunanje sisteme Pipeline and its parts for
transporta vode in njihovi deli external water conveyance
systems
SIST-TS CEN/TS 17152-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17152-3:2023
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17152-3:2023
CEN/TS 17152-3
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
November 2022
TECHNISCHE SPEZIFIKATION
ICS 23.040.01
English Version
Plastics piping systems for non-pressure underground
conveyance and storage of non-potable water - Boxes used
for infiltration, attenuation and storage systems - Part 3:
Conformity assessment scheme
Kunststoff-Rohrleitungssysteme für die drucklose
unterirdische Entwässerung für Nicht-Trinkwasser -
Versickerungsblöcke zur Verwendung in Infiltrations-,
Zwischenspeicher- und Speichersystemen - Teil 3:
Beurteilung der Konformität
This Technical Specification (CEN/TS) was approved by CEN on 27 June 2022 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17152-3:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17152-3:2023
CEN/TS 17152-3:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviated terms . 8
5 General . 8
6 Testing and inspection . 8
6.1 Group .
...
SLOVENSKI STANDARD
SIST-TS CEN/TS 17152-3:2023
01-februar-2023
Cevni sistemi iz polimernih materialov, ki delujejo po težnostnem principu in so
položeni v zemljo, za transport in shranjevanje vode, ki ni namenjena pitju - Zaboji
za sisteme infiltriranja, reduciranja in hrambe - 3. del: Shema ugotavljanja
skladnosti
Plastics piping systems for non-pressure underground conveyance and storage of non-
potable water - Boxes used for infiltration, attenuation and storage systems - Part 3:
Conformity assessment scheme
Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Entwässerung für Nicht-
Trinkwasser - Versickerungsblöcke zur Verwendung in Infiltrations-, Zwischenspeicher-
und Speichersystemen - Teil 3: Beurteilung der Konformität
Ta slovenski standard je istoveten z: CEN/TS 17152-3:2022
ICS:
23.040.03 Cevovodi za zunanje sisteme Pipeline and its parts for
transporta vode in njihovi deli external water conveyance
systems
SIST-TS CEN/TS 17152-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17152-3:2023
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17152-3:2023
CEN/TS 17152-3
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
November 2022
TECHNISCHE SPEZIFIKATION
ICS 23.040.01
English Version
Plastics piping systems for non-pressure underground
conveyance and storage of non-potable water - Boxes used
for infiltration, attenuation and storage systems - Part 3:
Conformity assessment scheme
Kunststoff-Rohrleitungssysteme für die drucklose
unterirdische Entwässerung für Nicht-Trinkwasser -
Versickerungsblöcke zur Verwendung in Infiltrations-,
Zwischenspeicher- und Speichersystemen - Teil 3:
Beurteilung der Konformität
This Technical Specification (CEN/TS) was approved by CEN on 27 June 2022 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17152-3:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17152-3:2023
CEN/TS 17152-3:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviated terms . 8
5 General . 8
6 Testing and inspection . 8
6.1 Group . 8
6.2 Type testing .
...
SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17152-3:2022
01-maj-2022
Cevni sistemi iz polimernih materialov, ki delujejo po težnostnem principu in so
položeni v zemljo, za transport in shranjevanje vode, ki ni namenjena pitju - Zaboji
za sisteme infiltriranja, reduciranja in hrambe - 3. del: Ugotavljanje skladnosti
Plastics piping systems for non-pressure underground conveyance and storage of non-
potable water - Boxes used for infiltration, attenuation and storage systems - Part 3:
Assessment of conformity
Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Entwässerung für Nicht-
Trinkwasser - Versickerungsblöcke zur Verwendung in Infiltrations-, Zwischenspeicher-
und Speichersystemen - Teil 3: Beurteilung der Konformität
Ta slovenski standard je istoveten z: FprCEN/TS 17152-3
ICS:
23.040.03 Cevovodi za zunanje sisteme Pipeline and its parts for
transporta vode in njihovi deli external water conveyance
systems
kSIST-TS FprCEN/TS 17152-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 17152-3:2022
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17152-3:2022
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17152-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
March 2022
ICS 23.040.01
English Version
Plastics piping systems for non-pressure underground
conveyance and storage of non-potable water - Boxes used
for infiltration, attenuation and storage systems - Part 3:
Assessment of conformity
Kunststoff-Rohrleitungssysteme für die drucklose
unterirdische Entwässerung für Nicht-Trinkwasser -
Versickerungsblöcke zur Verwendung in Infiltrations-,
Zwischenspeicher- und Speichersystemen - Teil 3:
Beurteilung der Konformität
This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 155.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17152-3:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17152-3:2022
FprCEN/TS 17152-3:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviated terms . 8
5 General . 8
6 Testing and inspection . 8
6.1 Group . 8
6.2 Type testing . 8
6.3 Batch release test .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.