SIST EN 13146-1:2012+A1:2015
(Main)Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint
Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint
This European Standard specifies a laboratory test procedure to determine:
a) the maximum longitudinal force that can be applied to a rail, secured to a sleeper, bearer or element of slab track by a rail fastening assembly, without non-elastic displacement of the rail occurring, or
b) the longitudinal stiffness at a specified longitudinal displacement of a specimen of embedded rail with an adhesive fastening system.
Bahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 1: Ermittlung des Durchschubwiderstandes in Längsrichtung
Diese Europäische Norm legt ein Labor-Prüfverfahren fest, zur Bestimmung:
a) der maximalen Längskraft, die auf eine Schiene aufgebracht werden kann, welche mittels eines Schienenbefestigungssystems auf einer Gleis- oder Weichenschwelle oder einem Stück fester Fahrbahn befestigt ist, ohne dass eine bleibende Verschiebung der Schiene eintritt; oder
b) der Längssteifigkeit einer Probe bei einer festgelegten Längsverschiebung einer eingebetteten Schiene mit haftendem Befestigungssystem.
Applications ferroviaires - Voie - Méthodes d'essai pour les systèmes de fixation - Partie 1: Détermination de la résistance longitudinale au glissement
Železniške naprave - Zgornji ustroj - Preskušanje pritrdilnih sistemov - 1. del: Ugotavljanje vzdolžnega odpora
Ta evropski standard določa laboratorijski preskusni postopek za ugotavljanje:
a) največje vzdolžne sile, ki ji je lahko izpostavljena tirnica, pritrjena na prag, nosilno ogrodje ali tirni element s pritrdilnim sestavom za tirnice, brez neelastičnega premika tirnice, ali
b) vzdolžne togosti pri določenem vzdolžnem premiku vzorca vgrajene tirnice z adhezivnim pritrdilnim sistemom.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Preskušanje pritrdilnih sistemov - 1. del: Ugotavljanje vzdolžnega odporaBahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 1: Ermittlung des Durchschubwiderstandes in LängsrichtungApplications ferroviaires - Voie - Méthodes d'essai pour les systèmes de fixation - Partie 1: Détermination de la résistance longitudinale au glissementRailway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint93.100Gradnja železnicConstruction of railwaysICS:Ta slovenski standard je istoveten z:EN 13146-1:2012+A1:2014SIST EN 13146-1:2012+A1:2015en,fr,de01-januar-2015SIST EN 13146-1:2012+A1:2015SLOVENSKI
STANDARD
SIST EN 13146-1:2012+A1:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13146-1:2012+A1
November 2014 ICS 93.100 Supersedes EN 13146-1:2012English Version
Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint
Applications ferroviaires - Voie - Méthodes d'essai pour les systèmes de fixation - Partie 1: Détermination de la résistance longitudinale au glissement
Bahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 1: Ermittlung des Durchschubwiderstandes in Längsrichtung This European Standard was approved by CEN on 26 November 2011 and includes Amendment 1 approved by CEN on 25 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13146-1:2012+A1:2014 ESIST EN 13146-1:2012+A1:2015
EN 13146-1:2012+A1:2014 (E) 2 Contents Page Foreword . 3 Introduction . 5 1 Scope. 6 2 Normative references . 6 3 Terms and definitions, symbols and abbreviations . 6 3.1 Terms and definitions . 6 3.2 Symbols and abbreviations . 6 4 Principle . 7 5 Apparatus . 7 5.1 Rail . 7 5.2 Actuator . 7 5.3 Displacement measuring instruments . 7 5.4 Force measuring instruments . 7 5.5 Verification of calibration . 7 6 Test specimens . 7 6.1 Rail support . 7 6.2 Fastening . 8 7 Procedure . 8 7.1 Test temperature . 8 7.2 Preparation for test . 8 7.3 Loading . 9 7.3.1 Longitudinal rail restraint . 9 7.3.2 Longitudinal stiffness . 10 7.4 Calculation . 10 7.4.1 Longitudinal rail restraint . 10 7.4.2 Longitudinal stiffness . 11 7.5 Visual inspection . 11 8 Test report . 11
SIST EN 13146-1:2012+A1:2015
EN 13146-1:2012+A1:2014 (E) 3 Foreword This document (EN 13146-1:2012+A1:2014) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2015, and conflicting national standards shall be withdrawn at the latest by May 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13146-1:2012". This document includes Amendment 1 approved by CEN on 2014-09-25. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. In this European Standard, the test procedure has been adapted to be applicable to embedded rail as well as surface mounted rail. For embedded rail with an adhesive fastening system the test result is expressed as longitudinal stiffness. This European Standard is one of the series EN 13146 "Railway applications — Track — Test methods for fastening systems" which consists of the following parts: — Part 1: Determination of longitudinal rail restraint; — Part 2: Determination of torsional resistance; — Part 3: Determination of attenuation of impact loads; — Part 4: Effect of repeated loading; — Part 5: Determination of electrical resistance; — Part 6: Effect of severe environmental conditions; — Part 7: Determination of clamping force; — Part 8: In service testing; — Part 9: Determination of stiffness. These support the requirements in the series EN 13481 "Railway applications — Track — Performance requirements for fastening systems". According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, SIST EN 13146-1:2012+A1:2015
EN 13146-1:2012+A1:2014 (E) 4 Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13146-1:2012+A1:2015
EN 13146-1:2012+A1:2014 (E) 5 Introduction For fastening systems that clamp the rail at discrete intervals the test p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.