iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 15129-1:2024

(Main)

Anti-seismic devices - Part 1: General design rules

Anti-seismic devices - Part 1: General design rules

This document covers the design of anti-seismic devices that are provided in structures, with the aim of modifying their response to the seismic action. It specifies functional requirements and general design rules of the anti-seismic devices for the seismic and non-seismic design situations, material characteristics, manufacturing and general testing requirements, as well as assessment and verification of constancy of performance, installation and maintenance requirements. This document covers the types of anti-seismic devices as defined in Clause 4.
NOTE   Additional information concerning the scope of this document is given in Part 2, Part 3, Part 4, Part 5 and Part 6 of this European Standard.

Erdbebenvorrichtungen - Teil 1: Allgemeine Bemessungsregeln

Dieses Dokument regelt die Bemessung von Erdbebenvorrichtungen, die zur Milderung der Erdbeben-einwirkung in Tragwerke eingebaut werden. Es legt funktionelle Anforderungen und allgemeine Bemessungsgrundsätze für die Erdbebenvorrichtungen für seismische und nichtseismische Bemessungssituationen, Werkstoffeigenschaften, Anforderungen an Herstellung und allgemeine Prüfung, die Bewertung und Überprüfung der Leistungsbeständigkeit sowie Anforderungen an Einbau und Instandhaltung fest. Dieses Dokument regelt die Typen von Erdbebenvorrichtungen und Kombinationen daraus, wie sie in Abschnitt 4 definiert sind.
ANMERKUNG   Zusätzliche Informationen, den Anwendungsbereich dieses Dokuments betreffend, werden in Teil 2, Teil 3, Teil 4, Teil 5 und Teil 6 dieser Europäischen Norm angegeben.

Dispositifs anti-sismiques - Règles générales de calcul

Le présent document traite de la conception de dispositifs anti-sismiques qui sont installés dans des structures dans le but de modifier leur réponse à l'action sismique. Il spécifie les exigences fonctionnelles et les règles générales de calcul des dispositifs anti-sismiques en situation sismique et en situation non sismique, les caractéristiques des matériaux, les exigences de fabrication et les exigences d'essai générales, ainsi que les exigences relatives à l'évaluation et à la vérification de la constance des performances, d'installation et de maintenance. Le présent document s'applique aux types de dispositifs anti-sismiques définis à l'Article 4.
NOTE   Des informations complémentaires concernant le domaine d'application du présent document sont fournies dans les Parties 2, 3, 4, 5 et 6 de la présente Norme européenne.

Naprave za zagotavljanje potresne varnosti konstrukcij - 1. del: Splošna pravila za načrtovanje

General Information

Status
Not Published
Public Enquiry End Date
12-Mar-2024
ICS
91.120.25 - Seismic and vibration protection
Technical Committee
I13 - Imaginarni 13
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
21-May-2024
Due Date
26-May-2024
Completion Date
21-May-2024
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/132 - Addenda to the mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures, structural bearings and floorings
Ref Project
prEN 15129-1 - Anti-seismic devices - Part 1: General design rules

Relations

Revised
SIST EN 15129:2018 - Anti-seismic devices
Effective Date
19-Jan-2023

Buy Standard

prEN 15129-1:2024prEN 15129-1:2024
PreviousNext
Draft
prEN 15129-1:2024
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15129-1:2024
01-februar-2024
Naprave za zagotavljanje potresne varnosti konstrukcij - 1. del: Splošna pravila za
načrtovanje
Anti-seismic devices - Part 1: General design rules
Erdbebenvorrichtungen - Teil 1: Allgemeine Bemessungsregeln
Dispositifs anti-sismiques - Règles générales de calcul
Ta slovenski standard je istoveten z: prEN 15129-1
ICS:
91.120.25 Zaščita pred potresi in Seismic and vibration
vibracijami protection
oSIST prEN 15129-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15129-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN 15129-1:2024


DRAFT
EUROPEAN STANDARD
prEN 15129-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2023
ICS 91.120.25 Will supersede EN 15129:2018
English Version

Anti-seismic devices - Part 1: General design rules
Dispositifs anti-sismiques Erdbebenvorrichtungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 340.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15129-1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15129-1:2024
prEN 15129-1:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Graphical representation of anti-seismic devices . 4
5 General design rules . 6
5.1 Performance of anti-seismic devices . 6
5.1.1 General. 6
5.1.2 Increased reliability of structural system. 6
5.1.3 Functional requirements . 6
5.1.4 Structural and mechanical requirements . 7
5.2 Conceptual design of anti-seismic devices. 7
5.2.1 Reliability of behaviour of anti-seismic devices . 7
5.2.2 Maintenance .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19901-2:2022(Main)
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2022)
EN ISO 19901-2:2022

This document contains requirements for defining the seismic design procedures and criteria for
offshore structures; guidance on the requirements is included in Annex A. The requirements focus on
fixed steel offshore structures and fixed concrete offshore structures. The effects of seismic events on
floating structures and partially buoyant structures are briefly discussed. The site-specific assessment
of jack-ups in elevated condition is only covered in this document to the extent that the requirements
are applicable.
Only earthquake-induced ground motions are addressed in detail. Other geologically induced hazards
such as liquefaction, slope instability, faults, tsunamis, mud volcanoes and shock waves are mentioned
and briefly discussed.
The requirements are intended to reduce risks to persons, the environment, and assets to the lowest
levels that are reasonably practicable. This intent is achieved by using:
a) seismic design procedures which are dependent on the exposure level of the offshore structure and
the expected intensity of seismic events;
b) a two-level seismic design check in which the structure is designed to the ultimate limit state (ULS)
for strength and stiffness and then checked to abnormal environmental events or the abnormal
limit state (ALS) to ensure that it meets reserve strength and energy dissipation requirements.
Procedures and requirements for a site-specific probabilistic seismic hazard analysis (PSHA) are
addressed for offshore structures in high seismic areas and/or with high exposure levels. However, a
thorough explanation of PSHA procedures is not included.
Where a simplified design approach is allowed, worldwide offshore maps, which are included in
Annex B, show the intensity of ground shaking corresponding to a return period of 1 000 years. In
such cases, these maps can be used with corresponding scale factors to determine appropriate seismic
actions for the design of a structure, unless more detailed information is available from local code or
site-specific study.
NOTE For design of fixed steel offshore structures, further specific requirements and recommended values
of design parameters (e.g. partial action and resistance factors) are included in ISO 19902, while those for fixed
concrete offshore structures are contained in ISO 19903. Seismic requirements for floating structures are
contained in ISO 19904, for site-specific assessment of jack-ups and other MOUs in the ISO 19905 series, for arctic
structures in ISO 19906 and for topsides structures in ISO 19901-3.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15129:2018(Main)
Anti-seismic devices
EN 15129:2018

This European Standard covers the design of devices that are provided in structures, with the aim of modifying their response to the seismic action. It specifies functional requirements and general design rules for the seismic situation, material characteristics, manufacturing and testing requirements, as well as evaluation of conformity, installation and maintenance requirements. This European Standard covers the types of devices and combinations thereof as defined in 3.4.
NOTE   Additional information concerning the scope of this European Standard is given in Annex A.

  • Standard
    177 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16681:2016(Main)
Steel static storage systems - Adjustable pallet racking systems - Principles for seismic design
EN 16681:2016

This European Standard specifies the structural design requirements applicable to all types of adjustable pallet racking systems fabricated from steel members, intended for storage of unit loads and subject to seismic actions.
This European Standard gives guidelines for the design of clad rack buildings in seismic zones and where requirements are not covered in EN 1998.
This European Standard does not cover other generic types of storage structures. Specifically, this European Standard does not apply to mobile storage systems, drive-in, drive-through and cantilever racks or static steel shelving systems.
This European Standard does not apply to the design of seismic isolated racking structures.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 15129-6:2022(Main)
Anti-seismic devices - Part 6: Sliding isolators
prEN 15129-6

This document specifies procedures for assessments and verification of constancy of performance (AVCP) of sliding isolators in relation to their characteristics. Sliding isolators with main functions in accordance with 3.1.2 are intended to be used for building and civil engineering construction works.
This document comprises the following types of sliding isolators:
1.   curved surface sliders (CSS, 3.1.1) (spherical and cylindrical) of the following types:
a)   single curved surface slider,
b)   double curved surface slider with rigid slider,
c)   double curved surface slider with articulated slider,
d)   multiple curved surface slider with rigid slider,
e)   multiple curved surface slider with articulated slider, and
2.   flat surface slider (FSS, 3.1.3).
This document comprises sliding isolators with some or all of the following parts:
a)   backing plates without lightening hollows and without ribs,
b)   slider without or with hinge,
c)   mating elements,
d)   sliding sheets, undimpled or dimpled, without or with lubricant (being in contact with mating element),
e)   containment rings (for controlling the sliding isolator kinematics but not limiting the sliding isolator displacement capacity).
This document comprises sliding isolators with the following materials:
a)   for backing plates without hard chromium plating and for sliders:
-   steel in accordance with EN 10025:2019 (all parts),
-   cast iron in accordance with ISO 1083:2018,
-   cast carbon steel in accordance with ISO 14737:2015, or
-   stainless steel in accordance with EN 10088:2014 (all parts);
b)   for backing plates with hard chromium plating:
-   steel grade S 355 J2+N, or
-   fine grain steel of the same or higher grade in accordance with the EN 10025:2019 (all parts);
c)   for mating elements:
-   austenitic steel with thickness of at least 2,5 mm in accordance with EN 10088-2:2014, 1.4401 + 2B or 1.4404 +2B,
-   backing plates with at least 100 µm hard chromium plating in accordance with EN ISO 6158:2018;
d)   for sliding sheets with and without lubrication:
-   UHMWPE (Ultra High Molecular Weight Polyethylene),
-   PTFE in accordance with EN 1337-7:2004 (Clause 5),
-   fluorpolymer made of claimed PTFE (polytetrafluoroethylene), or
-   PTFE filled with solid lubricant and reinforcing fibres;
e)   lubricants in accordance with EN 1337-2:2004 (5.8).
This document does not comprise:
a)   vertical seismic isolation systems,
b)   sliding isolators with restrainers limiting their displacement capacity, and
c)   sliding isolators with accumulated sliding path less than 1 000 m.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12845-3:2024(Main)
Fixed firefighting systems - Automatic sprinkler systems - Part 3: Guidance for earthquake bracing
EN 12845-3:2024

This document specifies requirements for earthquake protection of automatic sprinkler systems in accordance with the EN 12845 series of standards. This document applies only to locations in earthquake zones in accordance to EN 1998-1:2004, 3.2.1 and for area subject to peak ground acceleration above 9 % of g. This document does not cover all legislative requirements. In certain countries specific national regulations apply and take precedence over this document. Users of this document are advised to inform themselves of the applicability or non-applicability for this document by their national responsible authorities

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-77:2022(Main)
Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions
EN 81-77:2022

This document specifies the special provisions and safety rules for passenger and goods passenger lifts where these lifts are installed in buildings and constructions intended to withstand seismic events in compliance with EN 1998 1:2004 (Eurocode 8).
This document does not introduce any specific provisions and safety rules for lifts when ad ≤ 1 m/s2 as defined in Annex A.
This document does not address other risks due to seismic events (e.g. fire, flood, explosion).
This document is not applicable to lifts installed before the date of its publication.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19901-2:2022(Main)
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2022)
EN ISO 19901-2:2022

This document contains requirements for defining the seismic design procedures and criteria for
offshore structures; guidance on the requirements is included in Annex A. The requirements focus on
fixed steel offshore structures and fixed concrete offshore structures. The effects of seismic events on
floating structures and partially buoyant structures are briefly discussed. The site-specific assessment
of jack-ups in elevated condition is only covered in this document to the extent that the requirements
are applicable.
Only earthquake-induced ground motions are addressed in detail. Other geologically induced hazards
such as liquefaction, slope instability, faults, tsunamis, mud volcanoes and shock waves are mentioned
and briefly discussed.
The requirements are intended to reduce risks to persons, the environment, and assets to the lowest
levels that are reasonably practicable. This intent is achieved by using:
a) seismic design procedures which are dependent on the exposure level of the offshore structure and
the expected intensity of seismic events;
b) a two-level seismic design check in which the structure is designed to the ultimate limit state (ULS)
for strength and stiffness and then checked to abnormal environmental events or the abnormal
limit state (ALS) to ensure that it meets reserve strength and energy dissipation requirements.
Procedures and requirements for a site-specific probabilistic seismic hazard analysis (PSHA) are
addressed for offshore structures in high seismic areas and/or with high exposure levels. However, a
thorough explanation of PSHA procedures is not included.
Where a simplified design approach is allowed, worldwide offshore maps, which are included in
Annex B, show the intensity of ground shaking corresponding to a return period of 1 000 years. In
such cases, these maps can be used with corresponding scale factors to determine appropriate seismic
actions for the design of a structure, unless more detailed information is available from local code or
site-specific study.
NOTE For design of fixed steel offshore structures, further specific requirements and recommended values
of design parameters (e.g. partial action and resistance factors) are included in ISO 19902, while those for fixed
concrete offshore structures are contained in ISO 19903. Seismic requirements for floating structures are
contained in ISO 19904, for site-specific assessment of jack-ups and other MOUs in the ISO 19905 series, for arctic
structures in ISO 19906 and for topsides structures in ISO 19901-3.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1998-1:2005/A101:2009/AC:2022
Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings - National annex - Corrigendum
  • Corrigendum
    2 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC/IEEE 60980-344:2021(Main)
Nuclear facilities - Equipment important to safety - Seismic qualification (IEC/IEEE 60980-344:2020)
EN IEC/IEEE 60980-344:2021

This International Standard describes methods for establishing seismic qualification procedures
that will yield quantitative data to demonstrate that the equipment can meet its performance
requirements. This document is applicable to electrical, mechanical, instrumentation and control
equipment/components that are used in nuclear facilities. This document provides methods and
documentation requirements for seismic qualification of equipment to verify the equipment’s
ability to perform its specified performance requirements during and/or after specified seismic
demands. This document does not specify seismic demand or performance requirements. Other
aspects, relating to quality assurance, selection of equipment, and design and modification of
systems, are not part of this document. As seismic qualification is only a part of equipment
qualification, this document is used in conjunction with IEC/IEEE 60780-323.
The seismic qualification demonstrates equipment’s ability to perform its safety function(s)
during and/or after the time it is subjected to the forces resulting from at least one safe shutdown
earthquake (SSE/S2). This ability is demonstrated by taking into account, prior to the SSE/S2,
the ageing of equipment and the postulated occurrences of a given number of lower intensity
operating basis earthquake (OBE/S1). Ageing phenomena to be considered, if specified in the
design specification, are those which could increase the vulnerability of equipment to vibrations
caused by an SSE/S2.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50600-2-10:2021(Main)
Information technology - Data centre facilities and infrastructures - Part 2-10: Earthquake risk and impact analysis
CLC/TS 50600-2-10:2021

This document provides requirements and recommendations for the type of risk assessment to be employed concerning seismic activity and earthquakes in relation to data centres. In addition, it describes design concepts that can be employed as mitigation actions within the construction, and other elements of design, of data centres.

  • Technical specification
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day