SIST EN ISO 3822-1:1999/A1:2009

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty (ISO 3822-1:1999/Amd 1:2008)

Akustik - Prüfung des Geräuschverhaltens von Armaturen und Geräten der Wasserinstallation im Laboratorium - Teil 1: Messverfahren - Änderung 1: Messunsicherheit (ISO 3822-1:1999/Amd 1:2008)

Acoustique - Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques utilisés dans les installations de distribution d'eau - Partie 1: Méthode de mesurage - Amendement 1: Incertitude de mesure (ISO 3822-1:1999/Amd 1:2008)

Akustika - Laboratorijski preskusi emisije hrupa armatur in naprav pri inštalacijah za oskrbo z vodo - 1. del: Metode merjenja - Dopolnilo 1: Merilna negotovost (ISO 3822-1:1999/Amd 1:2008)

General Information

• Status: Published
• Publication Date: 26-Jan-2009
• ICS: 17.140.20 - Noise emitted by machines and equipment
• ICS: 91.140.60 - Water supply systems
• Technical Committee: AKU - Acoustics
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-Jan-2009
• Due Date: 16-Mar-2009
• Completion Date: 27-Jan-2009
• Directive: 89/106/EEC - Construction products
• Mandate: M/BC/CEN/91/8 - CPD: Protection against noise
• Ref Project: EN ISO 3822-1:1999/A1:2008 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty (ISO 3822-1:1999/Amd 1:2008)

Relations

• Amends: SIST EN ISO 3822-1:1999 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999)
• Effective Date: 01-Mar-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3822-1:1999/A1:2009
01-marec-2009
Akustika - Laboratorijski preskusi emisije hrupa armatur in naprav pri inštalacijah
za oskrbo z vodo - 1. del: Metode merjenja - Dopolnilo 1: Merilna negotovost (ISO
3822-1:1999/Amd 1:2008)
Acoustics - Laboratory tests on noise emission from appliances and equipment used in
water supply installations - Part 1: Method of measurement - Amendment 1:
Measurement uncertainty (ISO 3822-1:1999/Amd 1:2008)
Akustik - Prüfung des Geräuschverhaltens von Armaturen und Geräten der
Wasserinstallation im Laboratorium - Teil 1: Messverfahren - Änderung 1:
Messunsicherheit (ISO 3822-1:1999/Amd 1:2008)
Acoustique - Mesurage en laboratoire du bruit émis par les robinetteries et les
équipements hydrauliques utilisés dans les installations de distribution d'eau - Partie 1:
Méthode de mesurage - Amendement 1: Incertitude de mesure (ISO 3822-1:1999/Amd
1:2008)
Ta slovenski standard je istoveten z: EN ISO 3822-1:1999/A1:2008
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 3822-1:1999/A1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3822-1:1999/A1:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 3822-1:1999/A1:2009
EUROPEAN STANDARD
EN ISO 3822-1:1999/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2008
ICS 17.140.20; 91.140.60

English Version
Acoustics - Laboratory tests on noise emission from appliances
and equipment used in water supply installations - Part 1:
Method of measurement - Amendment 1: Measurement
uncertainty (ISO 3822-1:1999/Amd 1:2008)
Acoustique - Mesurage en laboratoire du bruit émis par les Akustik - Prüfung des Geräuschverhaltens von Armaturen
robinetteries et les équipements hydrauliques utilisés dans und Geräten der Wasserinstallation im Laboratorium - Teil
les installations de distribution d'eau - Partie 1: Méthode de 1: Messverfahren - Änderung 1: Messunsicherheit (ISO
mesurage - Amendement 1: Incertitude de mesure (ISO 3822-1:1999/Amd 1:2008)
3822-1:1999/Amd 1:2008)
This amendment A1 modifies the European Standard EN ISO 3822-1:1999; it was approved by CEN on 19 November 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3822-1:1999/A1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3822-1:1999/A1:2009
EN ISO 3822-1:1999/A1:2008 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3822-1:1999/A1:2009
EN ISO 3822-1:1999/A1:2008 (E)
Foreword
This document (EN ISO 3822-1:1999/A1:2008) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 126 "Acoustic properties of building elements
and of buildings", the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 3822:1999 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2009, and
conflicting national standards shall be withdrawn at the latest by June 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3822-1:1999/Amd1:2008 has been approved by CEN as a EN ISO 3822-1:1999/A1:2008
without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 3822-1:1999/A1:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 3822-1:1999/A1:2009

INTERNATIONAL ISO
STANDARD 3822-1
Third edition
1999-05-15
AMENDMENT 1
2008-12-15


Acoustics — Laboratory tests on noise
emission from appliances and equipment
used in water supply installations —
Part 1:
Method of measurement
AMENDMENT 1: Measurement uncertainty
Acoustique — Mesurage en laboratoire du bruit émis par les
robinetteries et les équipements hydrauliques utilisés dans les
installations de distribution d'eau —
Partie 1: Méthode de mesurage
AMENDEMENT 1: Incertitude de mesure




Reference number
ISO 3822-1:1999/Amd.1:2008(E)
©
ISO 2008

-------------------
...

SLOVENSKI SIST EN ISO 3822-
1:1999/oprA1:2006

PREDSTANDARD
julij 2006
Akustika - Laboratorijski preskusi emisije hrupa armatur in naprav pri
inštalacijah za oskrbo z vodo - 1. del: Metode merjenja - Dopolnilo 1: Merilna
negotovost (ISO 3822-1:1999/DAM 1:2006)
Acoustics - Laboratory tests on noise emission from appliances and equipment
used in water supply installations - Part 1: Method of measurement - Amendment 1:
Measurement uncertainty (ISO 3822-1:1999/DAM 1:2006)
ICS 17.140.20; 91.140.60 Referenčna številka
SIST EN ISO 3822-
1:1999/oprA1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
EN ISO 3822-1:1999
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2006
ICS 91.140.60; 17.140.20

English Version
Acoustics - Laboratory tests on noise emission from appliances
and equipment used in water supply installations - Part 1:
Method of measurement - Amendment 1: Measurement
uncertainty (ISO 3822-1:1999/DAM 1:2006)
Acoustique - Mesurage en laboratoire du bruit émis par les Akustik - Prüfung des Geräuschverhaltens von Armaturen
robinetteries et les équipements hydrauliques utilisés dans und Geräten der Wasserinstallation im Laboratorium - Teil
les installations de distribution d'eau - Partie 1: Méthode de 1: Messverfahren - Änderung 1: Messunsicherheit (ISO
mesurage - Amendement 1: Incertitude de mesure (ISO 3822-1:1999/DAM 1:2006)
3822-1:1999/DAM 1:2006)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 126.
This draft amendment A1, if approved, will modify the European Standard EN ISO 3822-1:1999. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3822-1:1999/prA1:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
EN ISO 3822-1:1999/prA1:2006 (E)




Foreword

This document (EN ISO 3822-1:1999/prA1:2006) has been prepared by Technical Committee
ISO/TC 43 "Acoustics" in collaboration with Technical Committee CEN/TC 126 "Acoustic
properties of building elements and of buildings", the secretariat of which is held by AFNOR.

This document is currently submitted to the parallel Enquiry.



Endorsement notice

The text of ISO 3822-1:1999/DAM1:2006 has been approved by CEN as EN ISO 3822-
1:1999/prA1:2006 without any modifications.

2

---------------------- Page: 3 ----------------------
DRAFT AMENDMENT ISO 3822-1:1999/DAmd 1.2
ISO/TC 43/SC 2 Secretariat: DIN
Voting begins on: Voting terminates on:
2007-09-20 2008-02-20
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Acoustics — Laboratory tests on noise emission from
appliances and equipment used in water supply installations —
Part 1:
Method of measurement
AMENDMENT 1: Measurement uncertainty
Acoustique — Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques
utilisés dans les installations de distribution d'eau —
Partie 1: Méthode de mesurage
AMENDEMENT 1: Incertitude de mesure
ICS 17.140.20; 91.140.60

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2007

---------------------- Page: 4 ----------------------
ISO 3822-1:1999/DAmd 1.2
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the
...