SIST EN ISO 17827-1:2016
(Main)Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
ISO 17827-1:2016 specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and above, e.g. wood chips, hog fuel, olive stones, etc. The method is intended to characterize material up to a particle size class of P63. For larger P-classes, the characterization is mainly done by hand sorting.
Biogene Festbrennstoffe - Bestimmung der Partikelgrößenverteilung für unkomprimierte Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren (ISO 17827-1:2016)
Biocombustibles solides - Détermination de la distribution granulométrique des combustibles non comprimés - Partie 1: Méthode au tamis oscillant d'ouverture de maille égale ou supérieure à 3,15 mm (ISO 17827-1:2016)
ISO 17827-1:2016 spécifie une méthode pour la détermination de la distribution granulométrique de biocombustibles particulaires au tamis oscillant dans le plan horizontal. Elle s'applique aux combustibles particulaires non comprimés de dimension supérieure nominale égale ou supérieure à 3,15 mm, tels que les copeaux, les bûchettes, les noyaux d'olive, etc. La méthode a pour but de caractériser les matériaux jusqu'à une classe granulométrique de P63. Pour les classes en P supérieures, la caractérisation se fait essentiellement par tri manuel.
Trdna biogoriva - Določevanje porazdelitve velikosti delcev za nestisnjena goriva - 1. del: Metoda z nihajočim sitom z odprtinami 3,15 mm ali več (ISO 17827-1:2016)
Ta mednarodni standard opisuje metodo za določevanje porazdelitve velikosti delcev biogoriv z metodo z vodoravno nihajočim sitom. Uporablja se za nestisnjena goriva z nazivno zrnatostjo vsaj 1 mm, kot so lesni sekanci, drobljenci, olivne koščice itd. Vzorec se preseje skozi vodoravno nihajoča sita, ki mehansko razvrstijo delce po velikosti od največjih do najmanjših. Sejanje mora potekati z vodoravno nihajočim premikanjem (eno- ali dvodimenzionalno) in uporabo ustrezne frekvence sunkov v skladu z vrsto materiala. Število sit in velikosti njihovih odprtin je treba izbrati v skladu s specifikacijo velikosti dejanskega vzorčnega materiala.
General Information
Relations
Frequently Asked Questions
SIST EN ISO 17827-1:2016 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)". This standard covers: ISO 17827-1:2016 specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and above, e.g. wood chips, hog fuel, olive stones, etc. The method is intended to characterize material up to a particle size class of P63. For larger P-classes, the characterization is mainly done by hand sorting.
ISO 17827-1:2016 specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and above, e.g. wood chips, hog fuel, olive stones, etc. The method is intended to characterize material up to a particle size class of P63. For larger P-classes, the characterization is mainly done by hand sorting.
SIST EN ISO 17827-1:2016 is classified under the following ICS (International Classification for Standards) categories: 75.160.40 - Biofuels. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 17827-1:2016 has the following relationships with other standards: It is inter standard links to SIST EN 15149-1:2011, SIST EN ISO 17827-1:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 17827-1:2016 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2016
1DGRPHãþD
SIST EN 15149-1:2011
7UGQDELRJRULYD'RORþHYDQMHSRUD]GHOLWYHYHOLNRVWLGHOFHY]DQHVWLVQMHQDJRULYD
GHO 0HWRGD]QLKDMRþLPVLWRP]RGSUWLQDPLPPDOLYHþ ,62
Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part
1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO
17827-1:2016)
Biogene Festbrennstoffe - Bestimmung der Partikelgrößenverteilung für unkomprimierte
Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren (ISO 17827-1:2016)
Biocombustibles solides - Détermination de la distribution granulométrique des
combustibles non comprimés - Partie 1: Méthode au tamis oscillant d'ouverture de maille
égale ou supérieure à 3,15 mm (ISO 17827-1:2016)
Ta slovenski standard je istoveten z: EN ISO 17827-1:2016
ICS:
75.160.40 Biogoriva Biofuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 17827-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2016
EUROPÄISCHE NORM
ICS 75.160.10; 27.190 Supersedes EN 15149-1:2010
English Version
Solid biofuels - Determination of particle size distribution
for uncompressed fuels - Part 1: Oscillating screen method
using sieves with apertures of 3,15 mm and above (ISO
17827-1:2016)
Biocombustibles solides - Détermination de la Biogene Festbrennstoffe - Bestimmung der
distribution granulométrique des combustibles non Partikelgrößenverteilung für unkomprimierte
comprimés - Partie 1: Méthode au tamis oscillant Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren
d'ouverture de maille égale ou supérieure à 3,15 mm mit Sieben mit einer Lochgröße von 3,15 mm und
(ISO 17827-1:2016) darüber (ISO 17827-1:2016)
This European Standard was approved by CEN on 20 February 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17827-1:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 17827-1:2016) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall
be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 15149-1:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17827-1:2016 has been approved by CEN as EN ISO 17827-1:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 17827-1
First edition
2016-03-01
Solid biofuels — Determination
of particle size distribution for
uncompressed fuels —
Part 1:
Oscillating screen method using sieves
with apertures of 3,15 mm and above
Biocombustibles solides — Détermination de la distribution
granulométrique des combustibles non comprimés —
Partie 1: Méthode au tamis oscillant d’ouverture de maille égale ou
supérieure à 3,15 mm
Reference number
ISO 17827-1:2016(E)
©
ISO 2016
ISO 17827-1:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 17827-1:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sample preparation . 3
6.1 Sample size . 3
6.2 Moisture conditioning . 3
7 Procedure. 4
8 Calculation . 4
9 Performance characteristics . 5
9.1 Repeatability . 5
9.2 Reproducibility . 6
10 Test report . 6
Annex A (normative) Determination of the median value of a particle size distribution .7
Bibliography . 9
ISO 17827-1:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.
The committee responsible for this document is ISO/TC 238, Solid biofuels.
ISO 17827 consists of the following parts under the general title Solid biofuels — Determination of
particle size distribution for uncompressed fuels:
— Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above
— Part 2: Vibrating screen method using sieves with apertures of 3,15 mm and below
NOTE ISO 17827–2 can also be used for round hole sieves with apertures of 4,0 mm and 5,6 mm.
iv © ISO 2016 – All rights reserved
INTERNATIONAL STANDARD ISO 17827-1:2016(E)
Solid biofuels — Determination of particle size distribution
for uncompressed fuels —
Part 1:
Oscillating screen method using sieves with apertures of
3,15 mm and above
1 Scope
This part of ISO 17827 specifies a method for the determination of the size distribution of particulate
biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed
fuels with a nominal top size of 3,15 mm and above, e.g. wood chips, hog fuel, olive stones, etc. The
method is intended to characterize material up to a particle size class of P63. For larger P-classes, the
characterization is mainly done by hand sorting.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 3310–2, Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
ISO 16559, Solid biofuels — Terminology, definitions and descriptions
ISO 17225–1, Solid biofuels — Fuel specifications and classes — Part 1: General requirements
1)
ISO 17827–2 , Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part
2: Vibrating screen method using sieves with apertures of 3,15 mm and below
ISO 18134–1, Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total
moisture — Reference method
ISO 18134–2, Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total
moisture — Simplified method
EN 14778, Solid biofuels — Sampling
EN 14780, Solid biofuels — Sample preparation
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 16559 and the following apply.
3.1
median value of the size distribution
median value [d50] that separates a distribution into two equal parts
Note 1 to entry: Graphically, the median value is the intercept point of the cumulative size distribution curve
with the 50 % horizontal line.
1) To be published.
ISO 17827-1:2016(E)
3.2
sieve fraction
material collected on a sieve
4 Principle
A lab
...
SIST EN ISO 17827-1:2016は、未圧縮燃料の粒子サイズ分布を測定するための標準化された方法を提供するものであり、特に3.15 mm以上の粒子サイズを持つ固体バイオ燃料に適用されます。この標準は、木くず、ホグ燃料、オリーブの種子など、さまざまなバイオ燃料の特性を評価するために重要です。 この標準の強みは、水平振動ふるい法を用いることによって、粒子サイズの分布を正確かつ効率的に測定できることにあります。これにより、バイオ燃料の品質の評価が可能となり、燃焼特性やエネルギー効率といった重要なパラメータを識別する助けになります。また、P63クラスまでの粒子サイズに対して対応しているため、幅広いバイオ燃料の特性を包括的に評価できます。 さらに、SIST EN ISO 17827-1:2016の関連性は、バイオエネルギー産業の成長を支えるために必要不可欠です。持続可能なエネルギー源としての固体バイオ燃料の重要性が高まる中、この標準が提供する測定手法は、産業界でのバイオ燃料の利用効率を向上させ、環境への影響を最小限に抑えるために重要な役割を果たします。 総じて、SIST EN ISO 17827-1:2016は、固体バイオ燃料の粒子サイズ分布を評価する際の基準として非常に価値のある標準であり、バイオ燃料の質の改善と、それに伴うエネルギー効率の向上に寄与するものです。
SIST EN ISO 17827-1:2016은 비압축 연료의 입자 크기 분포를 결정하기 위한 표준으로, 수평 진동 체를 사용하는 방법을 제시합니다. 이 표준은 3.15 mm 이상의 입자 크기를 갖는 입상 생물연료에 적용되며, 주로 나무 칩, 호그 연료, 올리브 돌 등과 같은 다양한 소재를 포함합니다. 이 표준의 주요 강점 중 하나는 표준화된 측정 방법을 통해 입자 크기 분포를 정확하게 평가할 수 있다는 점입니다. 이는 생물 연료의 품질 관리 및 평가에 있어 중요한 요소이며, 따라서 연료 배급 및 사용의 효율성을 높이는 데 기여합니다. 또한, SIST EN ISO 17827-1:2016은 P63까지의 입자 크기 범위에서 물질을 특성화하는 방법을 제시하여, 사용자가 전달받는 정보의 신뢰성을 높입니다. 이러한 특성을 통해 이 표준은 생물 연료 산업 내 다양한 이해관계자들에게 매우 중요한 참조 문서로 자리 잡고 있습니다. 생물 연료의 생산, 처리 및 소비에 있어 관련 품질 기준을 충족시키는 데 필수적인 역할을 하며, 이는 환경적으로 지속 가능한 에너지 솔루션을 찾는 데 도움을 줍니다. 따라서 SIST EN ISO 17827-1:2016은 생물연료 분야에서의 표준화와 효율성을 위한 중요한 기준으로, 나아가 해당 산업의 발전에 기여하는 핵심 문서라 할 수 있습니다.
Die Norm SIST EN ISO 17827-1:2016 bietet eine präzise und strukturierte Methode zur Bestimmung der Partikelgrößenverteilung von festen Biobrennstoffen, die durch die Verwendung von Sieben mit Öffnungen von 3,15 mm und darüber charakterisiert werden. Diese Norm deckt somit ein wichtiges Segment der Bioenergiebranche ab, da sie spezifisch für unkomprimierte Partikelformate wie Holzspäne, Hackschnitzel und Olivenkerne konzipiert ist. Ein herausragendes Merkmal der Norm ist die Einführung des horizontal oszillierenden Bildschirmverfahrens. Dieses Verfahren ermöglicht eine effiziente und reproduzierbare Bestimmung der Partikelgrößenverteilung, was für die Qualität und Konsistenz von Biobrennstoffen von entscheidender Bedeutung ist. Durch die Fokussierung auf Partikelgrößen bis zur Klasse P63 stellen die Anwender sicher, dass die Spezifikationen der Brennstoffe den industriellen Anforderungen entsprechen und optimale Verbrennungseigenschaften aufweisen. Die Relevanz dieser Norm ergibt sich nicht nur aus ihrer praktischen Anwendbarkeit, sondern auch aus der zunehmenden Nachfrage nach nachhaltigen Energiequellen und der damit verbundenen Notwendigkeit, die physikalischen Eigenschaften von Biomasse effizient zu klassifizieren. Dies ist von großer Bedeutung für die Entwicklung effizienterer Verbrennungsverfahren und die Minimierung von Emissionen. Dank ihrer klaren Richtlinien und der Fokussierung auf relevante Materialien bietet die SIST EN ISO 17827-1:2016 eine wertvolle Ressource für Hersteller, Tester und Fachleute im Bereich der erneuerbaren Energien, die an der Sicherstellung der Qualität und Leistungsfähigkeit von festen Biobrennstoffen arbeiten.
La norme SIST EN ISO 17827-1:2016 se concentre sur la détermination de la distribution de la taille des particules des biocarburants solides non compressés, en utilisant la méthode des tamis oscillants avec des ouvertures de 3,15 mm et au-dessus. Cette norme est particulièrement pertinente dans le secteur des biocarburants, car elle offre une approche standardisée pour analyser la granulométrie des combustibles particulaires tels que les copeaux de bois, les déchets de bois et les noyaux d'olive. L'un des principaux atouts de cette norme est sa capacité à caractériser efficacement les matériaux jusqu'à une classe de taille de particule P63, garantissant ainsi une précision dans l'évaluation de la qualité des biocarburants. En outre, le fait que la méthode soit spécifiquement conçue pour des combustibles ayant une taille nominale supérieure à 3,15 mm en fait un outil essentiel pour les producteurs et utilisateurs de biomasses. En outre, la normalisation de la méthode par l'ISO renforce son utilisation à l'échelle internationale, permettant ainsi une harmonisation des pratiques dans l'industrie des biocarburants. Cela facilite également la comparaison des résultats entre différents laboratoires et pays, soutenant ainsi les efforts en matière de développement durable et de transition énergétique. En résumé, la norme SIST EN ISO 17827-1:2016 se distingue par sa précision et son applicabilité dans l'analyse des biocarburants solides, tout en favorisant des standards communs dans l'industrie. Sa pertinence dans le contexte actuel de recherche de solutions énergétiques renouvelables ne peut être sous-estimée.
The SIST EN ISO 17827-1:2016 standard provides a comprehensive and methodical approach for determining the particle size distribution of solid biofuels through the oscillating screen method. This standard is particularly relevant for assessing particulate uncompressed fuels with a nominal top size beginning at 3.15 mm, which includes materials such as wood chips, hog fuel, and olive stones. One of the significant strengths of this standard lies in its precision and reliability in characterizing biofuels up to a specific particle size class, P63. By employing the horizontally oscillating screen method, it allows for a standardized process that can lead to consistent and repeatable results across different laboratories and applications. This is crucial for the biofuel industry, where the particle size can significantly impact combustion efficiency, handling, and overall fuel quality. Moreover, the relevance of SIST EN ISO 17827-1:2016 extends beyond mere compliance; it serves as a vital tool for industry stakeholders who require accurate particle size measurements to inform their production and quality control processes. The well-defined methodology not only enhances the understanding of biofuel characteristics but also supports stakeholders in meeting regulatory requirements and enhancing sustainability practices in biofuel usage. In summary, the SIST EN ISO 17827-1:2016 standard is an essential document that supports the accuracy and reliability of particle size distribution determinations for solid biofuels. Its focus on the oscillating screen method provides a robust framework for characterizing heterogeneous materials, making it a critical reference for professionals in the biofuel sector.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...