SIST EN 60432-1:2000/A2:2012
(Amendment)Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
International Standard IEC 60432-1 specifies the safety and interchangeability requirements of
tungsten filament incandescent lamps for general lighting service having:
– rated wattage up to and including 200 W;
– rated voltage of 50 V to 250 V inclusive;
– bulbs of the A, B, C, G, M, P, PS, PAR or R shapes* , or other bulb shapes where the lamps
are intended to serve the same purpose as lamps with the foregoing bulb shapes;
– bulbs with all kinds of finishes;
– caps B15d, B22d, E12, E14, E17, E26** , E26d, E26/5039, E27 or E27/5139.
As far as is reasonably practicable, this standard is also applicable to lamps with bulbs and caps other than those mentioned above, but which serve the same purpose. This standard specifies the method a manufacturer should use to show that his product conforms to this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given. This standard is concerned with safety criteria only and does not take into account the performance of tungsten filament lamps with respect to luminous flux, life or power consumption characteristics. Readers should refer to IEC 60064 for such characteristics with respect to types normally used for general lighting service.
Glühlampen - Sicherheitsanforderungen - Teil 1: Glühlampen für den Hausgebrauch und ähnliche allgemeine Beleuchtungszwecke
Lampes à incandescence - Prescriptions de sécurité - Partie 1: Lampes à filament de tungstène pour usage domestique et éclairage général similaire
Sijalke - Varnostne specifikacije - 1. del: Sijalke za uporabo v stanovanjih in podobnih primerih splošne razsvetljave
Mednarodni IEC 60432-1 določa zahteve glede varnosti in zamenljivosti
sijalk za splošno uporabo v razsvetljavi, ki imajo naslednje značilnosti:
– nazivno moč do vključno 200 W;
– nazivno napetost od 50 V do vključno 250 V;
– bučke oblik* A, B, C, G, M, P, PS, PAR ali R ali druge oblike bučk, če se sijalke
uporabljajo za enak namen kot sijalke prej navedenih oblik;
– bučke z vsemi vrstami zaključkov;
– vznožke B15d, B22d, E12, E14, E17, E26**, E26d, E26/5039, E27 ali E27/5139.
Kadar je to smiselno uporabno, se ta standard uporablja tudi za sijalke z bučkami in vznožki, ki niso navedeni zgoraj, vendar se uporabljajo za enake namene. Ta standard določa metodo, ki naj bi jo proizvajalec uporabil za dokazovanje, da je njegov izdelek v skladu s tem standardom na podlagi ocene celotne proizvodnje, in sicer v zvezi z njegovimi evidencami o preskusih končnih izdelkov. To metodo je mogoče uporabiti tudi za certificiranje. Navedene so tudi podrobnosti serijskega preskusnega postopka, ki ga je mogoče uporabiti za omejeno oceno serij. Ta standard obravnava le varnostna merila in ne upošteva delovanja sijalk glede na značilnosti svetlobnega toka, življenjske dobe ali porabe energije. Bralci naj za značilnosti glede tipov, ki se običajno uporabljajo za splošno uporabo v razsvetljavi, gledajo standard IEC 60064.
General Information
- Status
- Published
- Publication Date
- 04-Jul-2012
- Technical Committee
- IESV - Lamps and related equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 07-Jun-2012
- Due Date
- 12-Aug-2012
- Completion Date
- 05-Jul-2012
Relations
- Effective Date
- 17-May-2011
Overview
EN 60432-1:2000/A2:2012 is the CENELEC-adopted amendment to the European safety standard for incandescent tungsten filament lamps intended for domestic and similar general lighting purposes. It aligns the original EN 60432-1 with IEC 60432-1:1999/A2:2011 and incorporates updated safety references and requirements, notably on photobiological safety. The amendment was approved by CENELEC in January 2012 and published for national implementation.
Key topics and requirements
- Scope: Safety specifications for tungsten filament incandescent lamps used in homes and analogous general lighting applications.
- Photobiological safety: Amendment A2 explicitly covers photobiological safety in accordance with IEC 62471 and IEC/TR 62471-2. The document states that lamps covered by this part do not reach risk levels that require risk-group marking.
- Normative references: The amendment adds IEC 62471 and IEC/TR 62471-2 to the normative reference list, making photobiological safety standards an integral part of compliance assessment.
- Harmonisation: EN 60432-1:2000/A2:2012 endorses the corresponding IEC text without modification and ensures consistent national adoption across CENELEC member countries.
- Implementation timeline: CENELEC fixed dates for national implementation and withdrawal of conflicting standards (see official foreword for exact dates).
Practical applications and who uses this standard
- Lamp manufacturers use EN 60432-1:2000/A2:2012 to design and certify tungsten filament lamps for domestic markets, ensuring product safety and market access in Europe.
- Test laboratories and conformity assessors rely on the standard and its normative references (IEC 62471 family) to evaluate electrical, thermal and photobiological safety.
- Luminaire designers and OEMs reference the standard to confirm that lamps integrated into fixtures meet expected safety profiles and do not introduce additional photobiological risk.
- Regulatory bodies and procurement teams use the standard when specifying safety requirements for residential lighting products and verifying compliance with CENELEC-adopted norms.
- Compliance officers and product managers use it to support CE/market surveillance activities and harmonised national standard adoption.
Related standards
- IEC 60432-1:1999/A2:2011 (base international text)
- IEC 62471 - Photobiological safety of lamps and lamp systems
- IEC/TR 62471-2 - Guidance on manufacturing requirements relating to non-laser optical radiation safety
- EN 60432-1:2000 (original European edition)
This standard is essential for anyone involved in the design, testing or regulatory compliance of incandescent lamps, offering harmonised safety criteria and explicit integration of photobiological safety guidance for domestic lighting products.
Frequently Asked Questions
SIST EN 60432-1:2000/A2:2012 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes". This standard covers: International Standard IEC 60432-1 specifies the safety and interchangeability requirements of tungsten filament incandescent lamps for general lighting service having: – rated wattage up to and including 200 W; – rated voltage of 50 V to 250 V inclusive; – bulbs of the A, B, C, G, M, P, PS, PAR or R shapes* , or other bulb shapes where the lamps are intended to serve the same purpose as lamps with the foregoing bulb shapes; – bulbs with all kinds of finishes; – caps B15d, B22d, E12, E14, E17, E26** , E26d, E26/5039, E27 or E27/5139. As far as is reasonably practicable, this standard is also applicable to lamps with bulbs and caps other than those mentioned above, but which serve the same purpose. This standard specifies the method a manufacturer should use to show that his product conforms to this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given. This standard is concerned with safety criteria only and does not take into account the performance of tungsten filament lamps with respect to luminous flux, life or power consumption characteristics. Readers should refer to IEC 60064 for such characteristics with respect to types normally used for general lighting service.
International Standard IEC 60432-1 specifies the safety and interchangeability requirements of tungsten filament incandescent lamps for general lighting service having: – rated wattage up to and including 200 W; – rated voltage of 50 V to 250 V inclusive; – bulbs of the A, B, C, G, M, P, PS, PAR or R shapes* , or other bulb shapes where the lamps are intended to serve the same purpose as lamps with the foregoing bulb shapes; – bulbs with all kinds of finishes; – caps B15d, B22d, E12, E14, E17, E26** , E26d, E26/5039, E27 or E27/5139. As far as is reasonably practicable, this standard is also applicable to lamps with bulbs and caps other than those mentioned above, but which serve the same purpose. This standard specifies the method a manufacturer should use to show that his product conforms to this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given. This standard is concerned with safety criteria only and does not take into account the performance of tungsten filament lamps with respect to luminous flux, life or power consumption characteristics. Readers should refer to IEC 60064 for such characteristics with respect to types normally used for general lighting service.
SIST EN 60432-1:2000/A2:2012 is classified under the following ICS (International Classification for Standards) categories: 29.140.20 - Incandescent lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60432-1:2000/A2:2012 has the following relationships with other standards: It is inter standard links to SIST EN 60432-1:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60432-1:2000/A2:2012 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 60432-1:2000/A2:2012 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2012
Sijalke - Varnostne specifikacije - 1. del: Sijalke za uporabo v stanovanjih in
podobnih primerih splošne razsvetljave
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for
domestic and similar general lighting purposes
Glühlampen - Sicherheitsanforderungen - Teil 1: Glühlampen für den Hausgebrauch und
ähnliche allgemeine Beleuchtungszwecke
Lampes à incandescence - Prescriptions de sécurité - Partie 1: Lampes à filament de
tungstène pour usage domestique et éclairage général similaire
Ta slovenski standard je istoveten z: EN 60432-1:2000/A2:2012
ICS:
29.140.20 Žarnice z žarilno nitko Incandescent lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60432-1/A2
NORME EUROPÉENNE
May 2012
EUROPÄISCHE NORM
ICS 29.140.20
English version
Incandescent lamps -
Safety specifications -
Part 1: Tungsten filament lamps for domestic and similar general lighting
purposes
(IEC 60432-1:1999/A2:2011)
Lampes à incandescence - Glühlampen -
Prescriptions de sécurité - Sicherheitsanforderungen -
Partie 1: Lampes à filament de tungstène Teil 1: Glühlampen für den Hausgebrauch
pour usage domestique et éclairage und ähnliche allgemeine
général similaire Beleuchtungszwecke
(CEI 60432-1:1999/A2:2011) (IEC 60432-1:1999/A2:2011)
This amendment A2 modifies the European Standard EN 60432-1:2000; it was approved by CENELEC on 2012-
01-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60432-1:2000/A2:2012 E
Foreword
The text of document 34A/1475/CDV, future edition 2 of IEC 60432-1:1999/A2, prepared by SC 34A,
"Lamps", of IEC TC 34, "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60432-1:2000/A2:2012.
The following dates are fixed:
(dop) 2012-11-04
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-01-11
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for
...










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...