SIST EN 60436:2020/A11:2021

Electric dishwashers for household use - Methods for measuring the performance

2020-10-02: This A11 is approved  for the addition of Annex ZZA and ZZB for EN 60436:2020 to allow citation in OJ

Elektrische Geschirrspüler für den Hausgebrauch – Messverfahren für Gebrauchseigenschaften

Lave-vaisselle électriques à usage domestique - Méthodes de mesure de l’aptitude à la fonction

Električni pomivalni stroji za gospodinjstva - Preskusne metode za merjenje lastnosti - Dopolnilo A11

General Information

• Status: Published
• Publication Date: 08-Dec-2020
• ICS: 97.040.40 - Dishwashers
• Technical Committee: FGA - Consumer information related to household electrical appliances
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Dec-2020
• Due Date: 12-Feb-2021
• Completion Date: 09-Dec-2020
• Directive: 2019/2017 - COMMISSION DELEGATED REGULATION (EU) 2019/2017 of 11 March 2019 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of household dishwashers and repealing Commission Delegated Regulation (EU) No 1059/2010
• Directive: 2019/2022 - COMMISSION REGULATION (EU) 2019/2022 of 1 October 2019 laying down ecodesign requirements for household dishwashers pursuant to Directive 2009/125/EC of the European Parliament and of the Council amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EU) No 1016/2010
• Mandate: M/566 - Standardization request as regards ecodesign and energy labelling requirements for household dishwashers, household washing machines and household washer-dryers
• Ref Project: EN 60436:2020/A11:2020 - Electric dishwashers for household use - Methods for measuring the performance

Relations

• Amends: SIST EN 60436:2020 - Electric dishwashers for household use - Methods for measuring the performance
• Effective Date: 01-Jan-2021
• Revised: SIST EN IEC 60436:2025 - Electric dishwashers for household use - Methods for measuring the performance (IEC 60436:2025)
• Effective Date: 01-Nov-2025

Overview

EN 60436:2020/A11:2020 is an amendment to the European standard EN 60436:2020 that defines test methods for measuring the performance of electric dishwashers for household use. Approved by CENELEC on 28 October 2020 and published as national standards across member bodies, A11 adds informative annexes (ZZA and ZZB) to link the standard to EU energy labelling and ecodesign requirements.

This amendment supports a clear pathway for manufacturers, test laboratories and regulatory bodies to demonstrate conformity with Commission Delegated Regulation (EU) No 2019/2017 (energy labelling) and Commission Regulation (EU) No 2019/2022 (ecodesign) when the standard is cited in the Official Journal of the EU.

Key practical points:

• A11 modifies EN 60436:2020 by adding Annex ZZA and Annex ZZB.
• When cited in the OJ, compliance with the clauses mapped in those annexes provides a presumption of conformity with the relevant EU requirements.
• The document includes references and normative links to related measurement standards.

Key Topics

• Performance measurement scope: methods for assessing cleaning and drying performance, energy and water consumption, programme duration and low power modes.
• Annex ZZA (informative): relationship to energy labelling requirements of Commission Delegated Regulation (EU) No 2019/2017; maps clauses of EN 60436 to labelling metrics such as energy consumption per cycle, water consumption and programme duration.
• Annex ZZB (informative): relationship to ecodesign requirements of Commission Regulation (EU) No 2019/2022; maps clauses to ecodesign metrics and identifies where combined tests apply.
• Measurement cross-references: pointers to standards for low power modes (EN 50564:2011, EN 50643:2018) and airborne acoustical noise (EN 60704-2-3:2019).

Applications

This amendment and the underlying standard are directly relevant to:

• Manufacturers validating product performance for design and compliance.
• Independent test laboratories performing standardized measurements for energy and water consumption, cleaning/drying performance and programme timing.
• Compliance teams preparing technical documentation and declarations of conformity for EU market access.
• Regulators and market surveillance authorities verifying conformity with energy labelling and ecodesign rules.

Benefits: clearer conformity route to EU requirements, harmonized test vocabulary and reduced ambiguity when demonstrating performance for household dishwashers.

Related Standards

• EN 60436:2020 (base standard)
• EN 50564:2011 (measurement procedures for low power modes)
• EN 50643:2018 (power consumption tests)
• EN 60704-2-3:2019 (airborne acoustical noise measurements)

For manufacturers and testing bodies, implementing EN 60436:2020/A11 ensures alignment with recent EU standardisation requests (M/566) and provides a documented basis for presumption of conformity when the standard is cited in the Official Journal of the European Union.

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2021
Električni pomivalni stroji za gospodinjstva - Preskusne metode za merjenje
lastnosti - Dopolnilo A11
Electric dishwashers for household use - Methods for measuring the performance
Elektrische Geschirrspüler für den Hausgebrauch – Messverfahren für
Gebrauchseigenschaften
Lave-vaisselle électriques à usage domestique - Méthodes de mesure de l’aptitude à la
fonction
Ta slovenski standard je istoveten z: EN 60436:2020/A11:2020
ICS:
97.040.40 Pomivalni stroji Dishwashers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60436:2020/A11

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 97.040.40
English Version
Electric dishwashers for household use - Methods for measuring
the performance
Lave-vaisselle électriques à usage domestique - Méthodes Elektrische Geschirrspüler für den Hausgebrauch -
de mesure de l'aptitude à la fonction Messverfahren für Gebrauchseigenschaften
This amendment A11 modifies the European Standard EN 60436:2020; it was approved by CENELEC on 2020-10-28. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60436:2020/A11:2020 E

European Foreword
This document (EN 60436:2020/A11:2020) has been prepared by CLC/TC 59X "Performance of
household and similar electrical appliances".

The following dates are fixed:

• latest date by which this document has (dop) 2021-10-28
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023-10-28
standards conflicting with this document
have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annexes ZZA and ZZB, which are an integral
part of this document.
1 Addition of new Annexes ZZA and ZZB

Add the following new Annex ZZA and Annex ZZB:

Annex ZZA
(informative)
Relationship between this European Standard and the energy
labelling requirements of Commission Delegated Regulation (EU)
No 2019/2017 aimed to be covered

This European Standard has been prepared under a mandate given to CENELEC by the European
Commission ‘M/566’ / ‘C(2020) 4329 final’ to provide one voluntary means of conforming to the energy
labelling requirements of Commission Delegated Regulation (EU) No 2019/2017 of 11 March 2019
supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard
to energy labelling of household dishwashers and repealing Commission Delegated Regulation (EU)
No 1059/2010.
Once this standard is cited in the Official Journal of the European Union under that Commission
Regulation, compliance with the clauses of this standard given in Table ZZA.1 confers, within the limits
of the scope of this standard, a presumption of conformity with the corresponding requirements of that
and associated EFTA regulations.

Table ZZA.1 — Correspondence between this European Standard and Commission Delegated
of 11 March 2019 supplementing Regulation (EU) 2017/1369 of
Regulation (EU) No 2019/2017
the European Parliament and of the Council with regard to energy labelling of household
dishwashers and Commission’s standardisation request (SR) ‘M/566’ / ‘C(2020) 4329 final’

Energy labelling requirements Clause(s) / sub-clause(s) Remarks / Notes*
of Commission Delegated of this EN
Regulation (EU) No 2019/2017
[OJEU L315/134, 5.12.2019)
Annex IV, General conditions 2 Normative references
applicable to all energy labelling 3 Terms and
...