SIST EN 60598-2-24:2014

Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures

This part of the IEC 60598 series specifies requirements for luminaires intended for use where the necessity of limited temperature on the outer surface exists, due to the risk of thermal effects, combustion or degradation of materials but where the risk of explosion in the atmosphere does not exist. The luminaires are for use with electric light sources on supply voltages not exceeding 1 000 V. This standard specifically excludes requirements for luminaires for use in explosive gas atmospheres and explosive dust atmospheres.

Leuchten – Teil 2-24: Besondere Anforderungen – Leuchten mit begrenzter Oberflächentemperatur

Luminaires - Partie 2-24: Exigences particulières - Luminaires avec surfaces à températures limitées

La CEI 60598-2-24:2013, spécifie les exigences applicables aux luminaires prévus pour une utilisation qui nécessite de limiter la température de leurs surfaces extérieures, en raison du risque d'effets thermiques, de combustion ou de dégradation de matériaux, mais où le risque d'explosion dans l'atmosphère n'existe pas. Ces luminaires sont équipés avec des sources lumineuses électriques, pour des tensions d'alimentation ne dépassant pas 1000 V. La présente norme exclut spécifiquement les exigences pour les luminaires à utiliser dans des atmosphères gazeuses explosives et dans des atmosphères à poussières explosives. Cette deuxième édition annule et remplace la première édition parue en 1997. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:  a) remplacement du degré de protection requis de l'IP6X à l'IP4X pour harmoniser avec les règles de câblage international.  b) des températures limites ont été introduites pour les surfaces vitrées de toutes les sources lumineuses exposées au risque de la poussière.

Svetilke - 2-24. del: Posebne zahteve - Svetilke z omejeno površinsko temperaturo (IEC 60598-2-24:2013)

General Information

• Status: Published
• Publication Date: 02-Jan-2014
• ICS: 29.140.40 - Luminaires
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 16-Dec-2013
• Due Date: 20-Feb-2014
• Completion Date: 03-Jan-2014
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: EN 60598-2-24:2013 - Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures

Relations

• Replaces: SIST EN 60598-2-24:2000 - Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface temperatures
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60598-2-24:2000 - Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface temperatures
• Effective Date: 21-Jun-2011
• Revised: SIST EN 60598-2-24:2000 - Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface temperatures
• Effective Date: 06-May-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60598-2-24:2014
01-februar-2014
1DGRPHãþD
SIST EN 60598-2-24:2000
Svetilke - 2-24. del: Posebne zahteve - Svetilke z omejeno površinsko temperaturo
(IEC 60598-2-24:2013)
Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface
temperatures
Luminaires - Partie 2-24: Exigences particulières - Luminaires avec surfaces à
températures limitées
Ta slovenski standard je istoveten z: EN 60598-2-24:2013
ICS:
29.140.40 Svetila Luminaires
SIST EN 60598-2-24:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60598-2-24:2014

---------------------- Page: 2 ----------------------

SIST EN 60598-2-24:2014

EUROPEAN STANDARD
EN 60598-2-24

NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM

ICS 29.140.40 Supersedes EN 60598-2-24:1998


English version


Luminaires -
Part 2-24: Particular requirements -
Luminaires with limited surface temperatures
(IEC 60598-2-24:2013)


Luminaires -  Leuchten – Teil 2-24: Besondere
Partie 2-24: Exigences particulières - Anforderungen – Leuchten mit begrenzter
Luminaires avec surfaces à températures Oberflächentemperatur
limitées (IEC 60598-2-24:2013)
(CEI 60598-2-24:2013)





This European Standard was approved by CENELEC on 2013-07-24. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60598-2-24:2013 E

---------------------- Page: 3 ----------------------

SIST EN 60598-2-24:2014
EN 60598-2-24:2013 - 2 -
Foreword
The text of document 34D/1094/FDIS, future edition 2 of IEC 60598-2-24, prepared by SC 34D
"Luminaires" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60598-2-24:2013.

The following dates are fixed:
(dop) 2014-04-24
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-07-24
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60598-2-24:1998.

EN 60598-2-24:2013 includes the following significant technical changes with respect to
EN 60598-2-24:1998:
a) change of required degree of protection from IP6X to IP4X to harmonize with the international
wiring rules;
b) temperature limits introduced for glass surface of any light source exposed to risk of dust.

This standard is to be read in conjunction with EN 60598-1, Luminaires – Part 1: General
requirements and tests.

NOTE  In this standard, the following print types are used:
– requirements: in roman type.
– test specifications: in italic type.
– notes: in small roman type.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 60598-2-24:2013 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60598-2-24:2014
- 3 - EN 60598-2-24:2013

Annex ZA
(normative)
Normative references to i nternational publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60364-4-42 - Low voltage electrical installations - HD 60364-4-42 -
Part 4-42: Protection for safety - Protection
against thermal effects


IEC 60598-1 - Luminaires - EN 60598-1 -
Part 1: General requirements and tests


ISO 4225 1994 Air quality - General aspects - Vocabulary - -

---------------------- Page: 5 ----------------------

SIST EN 60598-2-24:2014

---------------------- Page: 6 ----------------------

SIST EN 60598-2-24:2014



IEC 60598-2-24

®


Edition 2.0 2013-06




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Luminaires –

Part 2-24: Particular requirements – Luminaires with limited surface

temperatures




Luminaires –

Partie 2-24: Exigences particulières – Luminaires avec surfaces à températures


limitées













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX J


ICS 29.140.40 ISBN 978-2-83220-867-0



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60598-2-24:2014
– 2 – 60598-2-24 © IEC:2013
CONTENTS
FOREWORD . 3
24.1 Scope . 5
24.2 Normative references . 5
24.3 General test requirements. 5
24.4 Terms and definitions . 5
24.5 Classification of luminaires . 6
24.6 Marking . 6
24.7 Construction . 6
24.8 Creepage distances and clearances . 7
24.9 Provision for earthing . 7
24.10 Terminals and electrical connections. 7
24.11 External and internal wiring . 7
24.12 Protection against electric shock . 7
24.13 Endurance test and thermal test. 7
24.13.1 Temperature limits – normal operation . 7
24.13.2 Temperature limits – abnormal operation . 8
24.13.3 Temperature limits – fault conditions . 8
24.14 Resistance to dust, solid objects and moisture . 8
24.15 Insulation resistance and electric strength . 8
24.16 Resistance to heat, fire and tracking . 8

Figure 1 – Symbol for luminaires with limited surface temperatures . 6

---------------------- Page: 8 ----------------------

SIST EN 60598-2-24:2014
60598-2-24 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

LUMINAIRES –

Part 2-24: Particular requirements –
Luminaires with limited surface temperatures

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accur
...