SIST EN ISO 19135-1:2016/A1:2021
(Amendment)Geographic information - Procedures for item registration - Part 1: Fundamentals - Amendment 1 (ISO 19135-1:2015/Amd 1:2021)
Geographic information - Procedures for item registration - Part 1: Fundamentals - Amendment 1 (ISO 19135-1:2015/Amd 1:2021)
Geoinformation - Registrierungsverfahren für geographische Informationseinheiten - Teil 1: Grundsätze - Änderung 1 (ISO 19135-1:2015/Amd 1:2021)
Information géographique - Procédures pour l'enregistrement d'éléments - Partie 1: Principes de base - Amendement 1 (ISO 19135-1:2015/Amd 1:2021)
Geografske informacije - Postopki za registracijo prostorskih postavk - 1. del: Osnove - Dopolnilo 1 (ISO 19135-1:2015/Amd 1:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19135-1:2016/A1:2021
01-junij-2021
Geografske informacije - Postopki za registracijo prostorskih postavk - 1. del:
Osnove - Dopolnilo 1 (ISO 19135-1:2015/Amd 1:2021)
Geographic information - Procedures for item registration - Part 1: Fundamentals -
Amendment 1 (ISO 19135-1:2015/Amd 1:2021)
Geoinformation - Registrierungsverfahren für geographische Informationseinheiten - Teil
1: Grundsätze - Änderung 1 (ISO 19135-1:2015/Amd 1:2021)
Information géographique - Procédures pour l'enregistrement d'éléments - Partie 1:
Principes de base - Amendement 1 (ISO 19135-1:2015/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 19135-1:2015/A1:2021
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19135-1:2016/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19135-1:2016/A1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 19135-1:2016/A1:2021
EN ISO 19135-1:2015/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2021
EUROPÄISCHE NORM
ICS 35.240.70
English Version
Geographic information - Procedures for item registration
- Part 1: Fundamentals - Amendment 1 (ISO 19135-
1:2015/Amd 1:2021)
Information géographique - Procédures pour Geoinformation - Registrierungsverfahren für
l'enregistrement d'éléments - Partie 1: Principes de geographische Informationseinheiten - Teil 1:
base - Amendement 1 (ISO 19135-1:2015/Amd Grundsätze - Änderung 1 (ISO 19135-1:2015/Amd
1:2021) 1:2021)
This amendment A1 modifies the European Standard EN ISO 19135-1:2015; it was approved by CEN on 12 January 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19135-1:2015/A1:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19135-1:2016/A1:2021
EN ISO 19135-1:2015/A1:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19135-1:2016/A1:2021
EN ISO 19135-1:2015/A1:2021 (E)
European foreword
This document (EN ISO 19135-1:2015/A1:2021) has been prepared by Technical Committee ISO/TC
211 "Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 19135-1:2015 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by September 2021,
and conflicting national standards shall be withdrawn at the latest by September 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19135-1:2015/Amd 1:2021 has been approved by CEN as EN ISO 19135-
1:2015/A1:2021 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 19135-1:2016/A1:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 19135-1:2016/A1:2021
INTERNATIONAL ISO
STANDARD 19135-1
First edition
2015-10-01
AMENDMENT 1
2021-02
Geographic information — Procedures
for item registration —
Part 1:
Fundamentals
AMENDMENT 1
Information géographique — Procédures pour l'enregistrement
d'éléments —
Partie 1: Principes de base
AMENDEMENT 1
Reference number
ISO 19135-1:2015/Amd.1:2021(E)
©
ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 19135-1:2016/A1:2021
ISO 19135-1:2015/Amd.1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 19135-1:2016/A1:2021
ISO 19135-1:2015/Amd.1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, g
...
SLOVENSKI STANDARD
SIST EN ISO 19135-1:2016/oprA1:2020
01-september-2020
Geografske informacije - Postopki za registracijo prostorskih postavk - 1. del:
Osnove - Dopolnilo 1 (ISO 19135-1:2015/DAM 1:2020)
Geographic information - Procedures for item registration - Part 1: Fundamentals -
Amendment 1 (ISO 19135-1:2015/DAM 1:2020)
Geoinformation - Registrierungsverfahren für geographische Informationseinheiten - Teil
1: Grundsätze - Änderung 1 (ISO 19135-1:2015/DAM 1:2020)
Information géographique - Procédures pour l'enregistrement d'éléments - Partie 1:
Principes de base - Amendement 1 (ISO 19135-1:2015/DAM 1:2020)
Ta slovenski standard je istoveten z: EN ISO 19135-1:2015/prA1
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19135-1:2016/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19135-1:2016/oprA1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 19135-1:2016/oprA1:2020
DRAFT AMENDMENT
ISO 19135-1:2015/DAM 1
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
2020-07-10 2020-10-02
Geographic information — Procedures for item
registration —
Part 1:
Fundamentals
AMENDMENT 1
Information géographique — Procédures pour l'enregistrement d'éléments —
Partie 1: Principes de base
AMENDEMENT 1
ICS: 35.240.70
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 19135-1:2015/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
SIST EN ISO 19135-1:2016/oprA1:2020
ISO 19135-1:2015/DAM 1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 19135-1:2016/oprA1:2020
ISO 19135-1:2015/DAM 1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics.
A list of all parts in the ISO 19135 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST EN ISO 19135-1:2016/oprA1:2020
ISO 19135-1:2015/DAM 1:2020(E)
Introduction
This amendment serves two purposes:
— Add a reference to the XML schema implementation of ISO 19135-1:2015 in an annex
This is intended for use in exchange registered items or other registry data between registries.
Note that the XML schema in ISO/TS 19135-2:2012 Geographic information — Procedures for item
registration — Part 2: XML schema implementation was an implementation of ISO 19135:2005 Geographic
information — Procedures for item registration. ISO/TS 19135-2:2012 was therefore withdrawn in 2019.
This amendment incorporates the provisions of the withdrawn ISO 19135-2:2012, by way of a new
Annex G which provides a link to an externally-held schema.
— Amend the text to reflect lessons learned during the preparation of ISO 19127:2019 Geographic
information – Geodetic registry, and the implementation of the ISO Geodetic Register
This aspect will be of interest to anyone implementing a registry that is to be accepted by ISO, for
example, where ISO or an ISO Technical Committee is the Register Owner.
iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 19135-1:2016/oprA1:2020
ISO 19135-1:2015/DAM 1:2020(E)
Geographic information — Procedures for item
registration —
Part 1:
Fundamentals
AMENDMENT 1
1 Amendments due to publication of related standards
Page 2, Clause 3
Change
1)
“ISO 19103: — ”
to
“ISO 19103:2015”
Delete footnote 1)
2 Amendments regarding XML schema implementation
Page 4, Clause 4.2
Add
“XML eXtensible Markup Language”
Page 61
Add
© ISO 2020 – All rights reserved 1
---------------------- Page: 7 ----------------------
SIST EN ISO 19135-1:2016/oprA1:2020
ISO 19135-1:2015/DAM 1:2020(E)
Annex G
(informative)
XML schema implementation
The XML implementation schema for this document may be used in a variety of ways, such as:
a) Being imported into the implementation schema of a standard which specialises ISO 19135-1 to
specify a particular kind of register;
b) To support publication approaches described in Clause 6.7, that is, to transfer one or more specific
register items. In this case, the ItemClass class is a suitable root element; the register association
from ItemClass and RegisterItem may be provided by reference. Certain associations, e.g. RE_
RegisterItem.additionInformation may be withheld, providing a gco: nilReason;
c) To export an entire register;
d) A partially populated RE_RegisterItem could be attached to a submission.
The XML implementation schema for this document was derived from the UML model in accordance
with
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.