SIST EN 1848-2:2001

Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing

This European Standard specifies methods for the determination of length, width, straightness and flatness of thermoplastic and elastomeric sheets for roof waterproofing.

Abdichtungsbahnen - Bestimmung der Länge, Breite, Geradheit und Planlage - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen

Diese Europäische Norm legt Verfahren zur Bestimmung von Länge, Breite, Geradheit und Planlage von Kunststoff- und Kautschukbahnen für Dachabdichtungen fest, die in Rollen geliefert werden.

Feuilles souples d'étanchéité - Détermination de la longueur, de la largeur, de la rectitude et de la planéité - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomeres

La présente Norme européenne spécifie des méthodes permettant de déterminer la longueur, la largeur, la rectitude et la planéité de feuilles plastiques ou élastomeres pour étanchéité de toiture, fournies sous forme de rouleaux.

Hidroizolacijski trakovi - Določevanje dolžine, širine in ravnosti - 2. del: Polimerni in elastomerni trakovi za tesnjenje streh

General Information

• Status: Published
• Publication Date: 30-Nov-2001
• ICS: 91.060.20 - Roofs
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: VLA - Water proofing
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2001
• Due Date: 01-Dec-2001
• Completion Date: 01-Dec-2001
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 1848-2:2001 - Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1848-2:2001
01-december-2001
+LGURL]RODFLMVNLWUDNRYL'RORþHYDQMHGROåLQHãLULQHLQUDYQRVWLGHO3ROLPHUQL
LQHODVWRPHUQLWUDNRYL]DWHVQMHQMHVWUHK
Flexible sheets for waterproofing - Determination of length, width, straightness and
flatness - Part 2: Plastic and rubber sheets for roof waterproofing
Abdichtungsbahnen - Bestimmung der Länge, Breite, Geradheit und Planlage - Teil 2:
Kunststoff- und Elastomerbahnen für Dachabdichtungen
Feuilles souples d'étanchéité - Détermination de la longueur, de la largeur, de la
rectitude et de la planéité - Partie 2: Feuilles d'étanchéité de toiture plastiques et
élastomeres
Ta slovenski standard je istoveten z: EN 1848-2:2001
ICS:
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 1848-2:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1848-2:2001

---------------------- Page: 2 ----------------------

SIST EN 1848-2:2001
EUROPEAN STANDARD
EN 1848-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2001
ICS 91.100.50
English version
Flexible sheets for waterproofing - Determination of length,
width, straightness and flatness - Part 2: Plastic and rubber
sheets for roof waterproofing
Feuilles souples d'étanchéité - Détermination de la Abdichtungsbahnen - Bestimmung der Länge, Breite,
longueur, de la largeur, de la rectitude et de la planéité - Geradheit und Planlage - Teil 2: Kunststoff- und
Partie 2: Feuilles d'étanchéité de toiture plastiques et Elastomerbahnen für Dachabdichtungen
élastomères
This European Standard was approved by CEN on 2 June 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1848-2:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1848-2:2001
Page 2
EN 1848-2:2001
Contents
Page
Foreword. 3
Introduction . 3
1 Scope . 3
2 Normative references. 3
3 Definitions . 3
4 Sampling . 4
5 Determination of length. 4
6 Determination of width . 4
7 Determination of straightness and flatness.5
8 Precision of the test methods. 5
9 Test report. 6

---------------------- Page: 4 ----------------------

SIST EN 1848-2:2001
Page 3
EN 1848-2:2001
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 254 " Flexible sheets for
waterproofing", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by November 2001, and conflicting national standards shall be withdrawn at the
latest by July 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
Introduction
This European Standard is intended for characterisation of plastic and rubber sheets as manufactured or
supplied before use. This test method relates exclusively to products or to their components where
appropriate, and not to waterproofing membrane systems composed of such products and installed in the
works.
This test is intended to be used in conjunction with European Standard "Definition and Characteristics" for
plastic and rubber sheets for roof waterproofing.
1 Scope
This Euro
...