SIST EN 1218-2:2004+A1:2009
(Main)Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
This document deals with all the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double end tenoning and/or profiling machines fed by chain or chains, hereinafter referred to as the machine, designed to cut solid wood, chipboard, fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings. The workpiece is fed passed the tools by an integrated feed.
This document does not apply to:
a) double end tenoning and/or profiling machines fed by chain or chains with a complete enclosure as defined in 3.3.11;
b) transportable machines.
This document does not deal with any hazards relating to:
c) mechanical loading of the workpiece to a single machine; or
d) single machine being used in combination with any other machine (as part of a line); or
e) use of tools working between the machine halves (see 3.1); or
f) use of laser.
For Computer Numerically Controlled (CNC) machines this document does not cover hazards related to Electro-Magnetic Compatibility (EMC).
NOTE 1 The requirements of this document apply to all machines whatever their method of control e.g. electromechanical and/or electronic.
This document is primarily directed to machines which are manufactured after the date of publication by CEN.
NOTE 2 Single end tenoning machines with sliding table are dealt with in EN 1218-1:1999. Single end tenoning machines where the tenon is produced only by means of saw blades are dealt with in EN 1218-3. Single end profiling machines fed by chain or chains are dealt with in EN 1218-5.
Sicherheit von Holzbearbeitungsmaschinen - Zapfenschneid- und Schlitzmaschinen - Teil 2: Doppelseitige Zapfenschneid- und Schlitzmaschinen und/oder Doppelendprofiler mit Kettenbandvorschub
!Dieses Dokument behandelt die in Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen
und Gefährdungsereignisse, die auf doppelseitige Zapfenschneid- und Schlitzmaschinen und/oder
Doppelendprofiler mit Kettenbandvorschub zutreffen, im Folgenden als Maschinen bezeichnet, die konstruiert
sind zum Bearbeiten von Massivholz, Spanplatten, Faserplatten, Sperrholz sowie diesen Werkstoffen,
wenn sie kunststoffbeschichtet oder mit Kunststoffkanten oder mit Furnier versehen sind. Das Werkstück wird
mittels mechanischem Vorschub an den Werkzeugen vorbei bewegt."
!gestrichener Text"
Dieses Dokument gilt nicht für
a) doppelseitige Zapfenschneid- und Schlitzmaschinen und/oder Doppelendprofiler mit Kettenbandvorschub
mit einer kompletten, wie in 3.3.11 definierten Kapselung;
b) transportable Maschinen.
Dieses Dokument behandelt keine Gefährdungen, die entstehen:
c) im Zusammenhang mit der mechanischen Beschickung der Werkstücke bei einer einzelnen Maschine
oder
d) durch die Kombination einer einzelnen Maschine mit irgendeiner anderen Maschine (als Teil einer Linie)
oder
e) bei der Verwendung von Werkzeugen zwischen den Maschinenhälften (siehe 3.1) oder
f) durch die Verwendung eines Lasers.
Dieses Dokument behandelt bei CNC-Maschinen nicht die Gefährdungen im Zusammenhang mit der elektromagnetischen
Verträglichkeit (EMV).
ANMERKUNG 1 Die Anforderungen dieses Dokuments gelten für alle Maschinen, unabhängig von der Art ihrer
Steuerung, z. B. elektromechanisch und/oder elektronisch.
Dieses Dokument gilt in erster Linie für Maschinen, die hergestellt wurden, nachdem CEN diese Europäische
Norm veröffentlichte.
Sécurité des machines pour le travail du bois - Tenonneuses - Partie 2: Machines à tenonner et/ou à profiler à chaîne ou chaînes
!Le présent document traite de tous les phénomènes dangereux, situations dangereuses et événements
dangereux significatifs, dont une liste est donnée à l'Article 4, applicables aux machines à tenonner et/ou à profiler
doubles à chaînes, conçues pour usiner du bois massif, des panneaux de particules, de fibres ou contreplaqué, ainsi
que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de matière plastique stratifiée, ci-après
désignées par le terme «machines». La pièce est amenée aux outils par un dispositif d’avance mécanisée."
!texte supprimé"
Le présent document ne s’applique pas aux :
a) machines à tenonner et/ou à profiler doubles à chaîne(s) à enceinte complète telles que définies en 3.3.11 ;
b) machines transportables.
Le présent document ne traite pas des phénomènes dangereux liés :
c) au chargement mécanique des pièces sur une machine seule ; ou
d) aux machines utilisées en combinaison avec toute autre machine (partie d’une ligne) ; ou
e) à l’utilisation d’outils travaillant entre les !demi-machines" (voir 3.1) ; ou
f) à l’utilisation de laser.
Pour les machines à commande numérique (CN), la présente Norme européenne ne traite pas les phénomènes
dangereux liés à la comptabilité électromagnétique (CEM).
NOTE 1 Les exigences du présent document s’applique à toutes les machines quelque soit leur mode de commande par
exemple électromécanique et/ou électronique.
Le présent document est applicable avant tout aux machines fabriquées après la date de publication par le CEN.
NOTE 2 Les tenonneuses simples à table roulante sont traitées dans l'EN 1218-1:1999. Les tenonneuses simples où le
tenon n’est réalisé qu’à l’aide de lames de scie sont traitées dans l’EN 1218-3. Les machines à profiler simples à chaînes sont
traitées dans l’EN 1218-5.
Varnost lesnoobdelovalnih strojev - Stroji za izdelovanje čepov in utorov - 2. del: Dvostranski stroji za izdelovanje čepov in utorov oziroma profilni stroji z verižnim podajanjem
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SRGDMDQMHPSicherheit von Holzbearbeitungsmaschinen - Zapfenschneid- und Schlitzmaschinen - Teil 2: Doppelseitige Zapfenschneid- und Schlitzmaschinen und/oder Doppelendprofiler mit KettenbandvorschubSécurité des machines pour le travail du bois - Tenonneuses - Partie 2: Machines à tenonner et/ou à profiler à chaîne ou chaînesSafety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains79.120.10Lesnoobdelovalni strojiWoodworking machinesICS:Ta slovenski standard je istoveten z:EN 1218-2:2004+A1:2009SIST EN 1218-2:2004+A1:2009en,fr01-september-2009SIST EN 1218-2:2004+A1:2009SLOVENSKI
STANDARD
SIST EN 1218-2:2004+A1:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1218-2:2004+A1
June 2009 ICS 79.120.10 Supersedes EN 1218-2:2004English Version
Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
Sécurité des machines pour le travail du bois - Tenonneuses - Partie 2: Machines à tenonner et/ou à profiler à chaîne ou chaînes
Sicherheit von Holzbearbeitungsmaschinen - Zapfenschneid- und Schlitzmaschinen - Teil 2: Doppelseitige Zapfenschneid- und Schlitzmaschinen und/oder Doppelendprofiler mit Kettenbandvorschub This European Standard was approved by CEN on 24 March 2004 and includes Corrigendum 1 issued by CEN on 20 December 2006 and Amendment 1 approved by CEN on 21 May 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1218-2:2004+A1:2009: ESIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 2
Contents page Foreword . 4Introduction . 51Scope . 62Normative references . 63Terms and definitions . 93.1General . 93.2Terms . 93.3Definitions . 104!!!!List of significant hazards"""" . 115Safety requirements and/or measures . 145.1General . 145.2Controls . 145.2.1Safety and reliability of control systems . 145.2.2Position of controls . 155.2.3Starting . 155.2.4Stop controls . 165.2.5Emergency stop . 175.2.6Integrated feed . 175.2.7Mode selection . 175.2.8Speed changing . 185.2.9Control duplication . 195.2.10Failure of the power supply . 195.2.11Failure of the control circuits . 195.3Protection against mechanical hazards . 195.3.1Stability . 195.3.2Risk of break-up during operation . 195.3.3Tool holder and tool design. 205.3.4Braking . 225.3.5Devices to minimise the possibility or the effect of ejection . 235.3.6Workpiece supports and guides . 235.3.7Prevention of access to moving parts . 245.4Protection against non-mechanical hazards . 315.4.1Fire . 315.4.2Noise . 315.4.3Emission of chips and dust . 335.4.4Electricity . 335.4.5Ergonomics and handling . 335.4.6Lighting . 345.4.7Pneumatics . 345.4.8Hydraulics. 345.4.9!!!!Electromagnetic compatibility"""" . 345.4.10Static electricity . 345.4.11Errors of fitting . 345.4.12Isolation . 355.4.13Maintenance . 356Information for use . 356.1Warning devices . 356.2Marking . 356.3Instruction handbook . 36SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 3 Annex A
(informative)
Examples of safety related control systems . 39Annex B
(normative)
Tool spindle dimensional tolerances . 43Annex ZA
(informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""" . 45Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 46Bibliography . 47 SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 4 Foreword This document (EN 1218-2:2004+A1:2009) has been prepared by the Technical Committee CEN/TC 142 "Woodworking machines -Safety", the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2009-05-21 and Corrigendum 1 issued by CEN on 20 December 2006. This document supersedes EN 1218-2:2004. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". The modifications of the related CEN Corrigendum have been implemented at the appropriate places in the text and are indicated by the tags ˜ ™. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." !EN 1218, Safety of woodworking machines — Tenoning machines
consists of the following parts: Part 1: Single end tenoning machines with sliding table Part 2: Double end tenoning and/or profiling machines fed by chain or chains Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers Part 4: Edge banding machines fed by chain(s) Part 5: One side profiling machines with fixed table and feed rollers or fed by chain" Organisations contributing to the preparation of this European Standard include European Committee of Woodworking Machinery Manufacturers Association "EUMABOIS". The European Standards produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B Standards on the subject of general safety (see introduction of EN ISO 12100-1:2003 for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 5 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This document is a type C standard as stated in !EN ISO 12100-1:2003". The machinery concerned and the extent to which hazards, hazardous situations and events covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this C type standard take precedence over the provisions of other standards, for machines that have been designed and built in accordance with the provisions of this type C standard. The requirements of this document are directed to manufacturers and their authorised representatives of double end tenoning and/or profiling machines fed by chain or chains. It is also useful for designers. This document also includes information which can be provided by the manufacturer to the user. Common requirements for tooling are given in !EN 847-1:2005". SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 6
1 Scope !This document deals with all the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double end tenoning and/or profiling machines fed by chain or chains, hereinafter referred to as the machine, designed to cut solid wood, chipboard, fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings. The workpiece is fed passed the tools by an integrated feed." !deleted text" This document does not apply to: a) double end tenoning and/or profiling machines fed by chain or chains with a complete enclosure as defined in 3.3.11; b) transportable machines. This document does not deal with any hazards relating to: c) mechanical loading of the workpiece to a single machine; or d) single machine being used in combination with any other machine (as part of a line); or e) use of tools working between the machine halves (see 3.1); or f) use of laser. For Computer Numerically Controlled (CNC) machines this document does not cover hazards related to Electro-Magnetic Compatibility (EMC). NOTE 1 The requirements of this document apply to all machines whatever their method of control e.g. electromechanical and/or electronic. This document is primarily directed to machines which are manufactured after the date of publication by CEN. NOTE 2 Single end tenoning machines with sliding table are dealt with in EN 1218-1:1999. Single end tenoning machines where the tenon is produced only by means of saw blades are dealt with in EN 1218-3. Single end profiling machines fed by chain or chains are dealt with in EN 1218-5. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text" !EN 614-1:2006, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles" !EN 847-1:2005, Tools for woodworking — Safety requirements — Part 1: Milling tools, circular saw blades" !EN 894-1:1997, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 7 EN 894-2:1997, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays EN 894-3:2000, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators" !deleted text" EN 982:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Hydraulics EN 983:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Pneumatics !EN 1005-1:2001, Safety of machinery — Human physical performance — Part 1: Terms and definitions EN 1005-2:2003, Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery EN 1005-3:2002, Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation EN 1005-4:2005, Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery" EN 1037:1995, Safety of machinery — Prevention of unexpected start-up !deleted text" EN 1088:1995, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection EN 1760-2:2001, Safety of machinery — Pressure sensitive protection devices — Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars EN 1837:1999, Safety of machinery — Integral lighting of machines !EN 50370-1:2005, Electromagnetic compatibility (EMC) — Product family standard for machine-tools —
Part 1: Emission EN 50370-2:2003, Electromagnetic compatibility (EMC) — Product family standard for machine-tools —
Part 2: Immunity" !EN 60204-1:2006", Safety of machinery — Electrical equipment of machines — Part 1: General requirements !(IEC 60204-1:2005, modified)" !EN 60439-1:1999, Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999)" EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) !EN 60947-4-1:2001", Low voltage switchgear and controlgear — Part 4-1: Contactors and motor starters - Electromechanical contactors and motor starters !(IEC 60947-4-1:2000)" !EN 60947-5-1:2004", Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices !(IEC 60947-5-1:2003)" !EN 61310-1:2008, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007)" SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 8 !CLC/TS 61496-2:2006", Safety of machinery — Electro-sensitive protective equipment — !Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006)" !EN ISO 354:2003", Acoustics — Measurement of sound absorption in a reverberation room (ISO 354:2003) EN ISO 3743-1:1995, Acoustics — Determination of sound power levels of noise sources — Engineering methods for small, moveable sources in reverberant fields — Part 1: Comparison method for hard walled test rooms (ISO 3743-1:1994) EN ISO 3743-2:1996, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, moveable sources in reverberant fields — Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) !EN ISO 3745:2003", Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for anechoic and semi-anechoic rooms (ISO 3745:2003) EN ISO 3746:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) EN ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 9614-1:1995, Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points (ISO 9614-1:1993) EN ISO 11202:1995, !Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Survey method in situ (ISO 11202:1995)" EN ISO 11204:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at the workstation and at other specified positions — Method requiring environmental corrections (ISO 11204:1995) EN ISO 11688-1:1998, Acoustics — Recommended practice for the design of low noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles (ISO 12100-2:2003) !EN ISO 13849-1:2008 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006)" !EN ISO 13850:2008, Safety of machinery — Emergency stop — Principles for design (ISO 13850:2006)" ISO 286-2:1988, ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts ISO 7960:1995, Airborne noise emitted by machine tools — Operating conditions for woodworking machines !HD 21.1 S4:2002, Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation — Part 1: General requirements" SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 9 !HD 22.1 S4:2002, Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 1: General requirements" 3 Terms and definitions 3.1 General For the purposes of this document, the terms and definitions given in !EN ISO 12100-1:2003" apply. Additional definitions specifically needed for this document are shown in 3.2 and 3.3. 3.2 Terms The main parts of the machine and their terminology are illustrated in Figure 1. SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 10
123423 Key
1 Machine half 2 Top pressure beams 3 Chain beams 4 Feed cross drive shaft Figure 1 — Terminology 3.3 Definitions 3.3.1 double end tenoning and/or profiling machine fed by chain or chains woodworking machine primarily designed for production of tenons and/or profiles on opposing ends of a workpiece in one pass. The tenons and/or profiles are cut by means of milling tools, saw blade(s) and/or sanding units mounted on one or more spindles on each machine half. The workpiece is presented by means of a chain or chains using pads and/or dogs mounted on a continuous chain belt or similar conveyor 3.3.2 machine half part of a machine consisting of a frame, chain beam, top pressure beam and working units. Each machine half processes one, different, end of the workpiece. One or both machine halves move to accept workpieces of different dimensions 3.3.3 profile shaping of an edge of a workpiece by milling tools, saw blades and/or sanding units. Profiling also includes panel sizing 3.3.4 integrated feed feed mechanism for the workpiece or tool which is integrated with the machine and where the workpiece or machine element with incorporated tool are held and controlled mechanically during the machining operation 3.3.5 ejection unexpected movement of the workpiece or parts of it or part of the machine from the machine during processing SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 11 3.3.6 machine actuator power mechanism used to effect the motion of the machine 3.3.7 run-up time time elapsed from the actuation of the start control device until the spindle reaches the intended speed 3.3.8 unbraked run-down time time elapsed from the actuation of the stop control, but not the braking device (if fitted) up to spindle standstill 3.3.9 braked run-down time time elapsed from the actuation of the stop control and the brake devices up to spindle standstill 3.3.10 integral enclosure guarding designed to fit close to the machine and provide a measure of sound attenuation and where certain setting adjustments may be available outside the enclosure. Each machine half is provided with separate guarding and on the adjustable machine half/halves this guarding moves with it when adjustment is made for workpiece width 3.3.11 complete enclosure total machine enclosure primarily designed for noise attenuation and to permit the operator to move around freely within it and where all machine setting and adjustments are available inside it 3.3.12 !!!!displaceable machine"""" machine which is located on the floor, stationary during use and equipped with a device, normally wheels, which allow it to be moved between locations 3.3.13 !!!!information from the supplier"""" statements, sales literature, leaflets or other documents where a manufacturer (supplier) declares either the characteristics of e.g. a material or product or the compliance of the material or product to a relevant standard 4 !!!!List of significant hazards"""" !This clause contains all the significant hazards, hazardous situations and events (see EN 1050:1996) as far as they are dealt with in this document, identified by risk assessment as significant for the machines as defined in the scope and which require action to eliminate or reduce the risk. This document deals with these significant hazards by defining safety requirements and/or measures or by reference to relevant standards. These hazards are listed in Table 1 in accordance with Annex A of EN 1050:1996.
SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 12 Table 1 — List of significant hazards
No Hazards, hazardous situations and hazardous events EN ISO 12100 Relevant sub-clause of this document
Part 1: 2003 Part 2: 2003
1 Mechanical hazards related to: - machine parts or workpieces:
a) shape; 4.2 4.2.1, 4.2.2, 5 5.3.3, 5.3.7, 5.4.5, 6.3
b) relative location; 5.2.2, 5.2.5, 5.3.7
d) mass and velocity (kinetic energy of elements in controlled or uncontrolled motion); 5.2.7, 5.3.5, 5.3.7
e) mechanical strength. 5.3.2, 5.3.3
- accumulation of energy inside the machinery:
g) liquids and gases under pressure; 4.2 4.10, 5.5.4 5.4.7, 5.4 8 1.1 Crushing hazard 4.2.1
5.3.7 1.2 Shearing hazard 5.3.7 1.3 Cutting or severing hazard 5.3.2, 5.3.3, 5.3.4, 5.3.7 1.4 Entanglement hazard 5.3.3, 5.3.4, 5.3.6, 5.3.7 1.5 Drawing-in or trapping hazard 5.3.7.1 1.6 Impact hazard 5.3.7 1.9 High pressure fluid injection or ejection hazard 5.3.4, 5.4.7, 5.4.8 2 Electrical hazards due to: 2.1 Contact of persons with live parts (direct contact) 4.3 4.9, 5.5.4 5.4.4, 5.4.6, 5.4.12, 5.4.13 2.2 Contact of persons with parts which have become live under faulty conditions (indirect contact) 4.3 4.9 5.4.4, 5.4.6, 5.4.12, 5.4.13 4 Hazards generated by noise, resulting in: 4.1 Hearing loss (deafness), other physiological disorders (loss of balance, loss of awareness) 4.5 4.2.2, 5 5.4.2 4.2 Interference with speech communication, acoustic signals.
5.4.2 7 Hazards generated by materials and substances (and their constituent elements) processed or used by the machinery 7.1 Hazards from contact with or inhalation of harmful fluids and dusts 4.8 4.3b, 4.4
5.4.3, 6.3 7.2 Fire hazard 4.8 4.4
5.4.1, 5.4.3 8 Hazards generated by neglecting ergonomicprinciples in machinery design related to: 8.1 Unhealthy postures or excessive effort 4.9 4.7, 4.8.2, 4.11.12, 5.5.5, 5.5.6 5.2.2, 5.4.5, 6.3 8.2 Hand-arm or foot-leg anatomy 4.9 4.8.3
5.2.2, 5.4.5, 6.3 8.4 Local lighting
4.8.6 5.4.6, 6.3 8.6 Human error, human behaviour
4.8, 4.11.8, 4.11.10, 5.5.2, 6 6.3 SIST EN 1218-2:2004+A1:2009
EN 1218-2:2004+A1:2009 (E) 13 8.7 Design, location or identification of manual controls
4.8.7, 4.11.8 5.2.2 8.8 Design or location of visual display units
4.8.8, 6.2 5.2.2 9
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.