Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C

This European Standard specifies the characteristics of screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated.
Classification: 1 100 MPa  ) / 315 °C  ).

Luft- und Raumfahrt - Flachkopfschrauben mit Sechs-Bogenzahn, mit mittlerer Gewindelänge, aus Titanlegierung, anodisiert, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur)/315 °C

Diese Europäische Norm legt die Eigenschaften von Flachkopfschrauben mit Sechs-Bogenzahn und mittlerer Gewindelänge aus Titanlegierung, anodisiert, MoS2-geschmiert, fest.

Série aérospatiale - Vis à tête cylindrique, à empreinte six lobes, tige normale à tolérance large, filetage moyen, en alliage de titane, anodisées, lubrifiées MoS2 - Classification : 1 100 Mpa (à température ambiante)/315 °C

Aeronavtika - Vijaki, valjasta glava, šestzoba vdolbina, široka toleranca, srednja navojna dolžina, iz titanove zlitine, anodizirani, mazani z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °C

Ta standard določa lastnosti vijakov: valjasta glava, šestzoba vdolbina, široka toleranca, srednja navojna dolžina, iz titanove zlitine, anodizirani, mazani z MoS2.
Klasifikacija: 1100 MPa/315 °C.

General Information

Status
Published
Publication Date
31-Jan-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Jan-2017
Due Date
31-Mar-2017
Completion Date
01-Feb-2017

RELATIONS

Buy Standard

Standard
SIST EN 4178:2017
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 4178:2017
01-marec-2017
1DGRPHãþD
SIST EN 4178:2010

Aeronavtika - Vijaki, valjasta glava, šestzoba vdolbina, široka toleranca, srednja

navojna dolžina, iz titanove zlitine, anodizirani, mazani z MoS2 - Klasifikacija: 1100

MPa (pri temperaturi okolice)/315 °C

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank,

medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100

MPa (at ambient temperature)/315 °C
Luft- und Raumfahrt - Flachkopfschrauben mit Sechs-Bogenzahn, mit mittlerer

Gewindelänge, aus Titanlegierung, anodisiert, MoS2-geschmiert - Klasse: 1 100 MPa

(bei Raumtemperatur)/315 °C

Série aérospatiale - Vis à tête cylindrique, à empreinte six lobes, tige normale à

tolérance large, filetage moyen, en alliage de titane, anodisées, lubrifiées MoS2 -

Classification : 1 100 Mpa (à température ambiante)/315 °C
Ta slovenski standard je istoveten z: EN 4178:2017
ICS:
49.025.30 Titan Titanium
49.030.10 Navoji Screw threads
SIST EN 4178:2017 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4178:2017
---------------------- Page: 2 ----------------------
SIST EN 4178:2017
EN 4178
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2017
EUROPÄISCHE NORM
ICS 49.030.10 Supersedes EN 4178:2009
English Version
Aerospace series - Screws, pan head, six lobe recess, coarse
tolerance normal shank, medium length thread, in
titanium alloy, anodized, MoS2 lubricated - Classification:
1 100 MPa (at ambient temperature) / 315 °C

Série aérospatiale - Vis à tête cylindrique, à empreinte Luft- und Raumfahrt - Flachkopfschrauben mit Sechs-

six lobes, tige normale à tolérance large, filetage Bogenzahn, mit mittlerer Gewindelänge, aus

moyen, en alliage de titane, anodisées, lubrifiées MoS2 Titanlegierung, anodisiert, MoS2-geschmiert - Klasse: 1

- Classification: 1 100 MPa (à température ambiante) / 100 MPa (bei Raumtemperatur) / 315 °C

315 °C
This European Standard was approved by CEN on 4 March 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4178:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4178:2017
EN 4178:2017 (E)
Contents
Page

European foreword ...................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Required characteristics .............................................................................................................................. 5

4 Designation ....................................................................................................................................................... 8

5 Marking ............................................................................................................................................................... 8

6 Technical specification ................................................................................................................................. 8

Annex A (informative) Standard evolution form ................................................................................................ 9

---------------------- Page: 4 ----------------------
SIST EN 4178:2017
EN 4178:2017 (E)
European foreword

This document (EN 4178:2017) has been prepared by the Aerospace and Defence Industries

Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this European

Standard has received the approval of the National Associations and the Official Services of the member

countries of ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be

withdrawn at the latest by July 2017.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent

rights.
This document supersedes EN 4178:2009.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 4178:2017
EN 4178:2017 (E)
1 Scope

This European Standard specifies the characteristics of screws, pan head, six lobe recess, coarse

tolerance normal shank, medium length thread, in titanium a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.