oSIST prEN 2302:2022

Aerospace series - Heat resisting nickel base alloy Ni Cr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm

This document specifies the requirements relating to:
Heat resisting nickel base alloy Ni Cr20Co3Fe3
Rm ≥ 650 MPa
Sheets and strips, cold rolled
0,25 mm < a ≤ 3 mm
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Nickellegierung Ni Cr20Co3Fe3 - Rm ≥ 650 MPa - Bleche und Bänder, kaltgewalzt - 0,25 mm < a ≤ 3 mm

Série aérospatiale - Alliage résistant à chaud à base de nickel Ni Cr20Co3Fe3 - Rm ≥ 650 MPa - Tôles et bandes, laminées à froid - 0,25 mm < a ≤ 3 mm

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud base nickel NiCr20Co3Fe3
Rm ≥ 650 MPa
Tôles et bandes, laminées à froid
0,25 mm < a ≤ 3 mm
pour les applications aérospatiales.

Aeronavtika - Toplotnoodporne zlitine na nikljevi osnovi Ni Cr20Co3Fe3 - Rm ≥ 650 MPa - Pločevina in trakovi, hladno valjani - 0,25 mm < a ≤ 3 mm

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Sep-2022
• ICS: 49.025.15 - Non-ferrous alloys in general
• ICS: 77.120.40 - Nickel, chromium and their alloys
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 22-Jun-2022
• Due Date: 09-Nov-2022
• Completion Date: 16-Sep-2022
• Ref Project: prEN 2302 - Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 2302:2022
01-september-2022

Aeronavtika - Toplotnoodporne zlitine na nikljevi osnovi Ni Cr20Co3Fe3 - Rm ≥ 650

MPa - Pločevina in trakovi, hladno valjani - 0,25 mm < a ≤ 3 mm

Aerospace series - Heat resisting nickel base alloy Ni Cr20Co3Fe3 - Rm ≥ 650 MPa -

Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm

Luft- und Raumfahrt - Hochwarmfeste Nickellegierung Ni Cr20Co3Fe3 - Rm ≥ 650 MPa -

Bleche und Bänder, kaltgewalzt - 0,25 mm < a ≤ 3 mm

Série aérospatiale - Alliage résistant à chaud à base de nickel Ni Cr20Co3Fe3 - Rm ≥

650 MPa - Tôles et bandes, laminées à froid - 0,25 mm < a ≤ 3 mm
Ta slovenski standard je istoveten z: prEN 2302
ICS:
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
oSIST prEN 2302:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2302:2022
---------------------- Page: 2 ----------------------
oSIST prEN 2302:2022
DRAFT
EUROPEAN STANDARD
prEN 2302
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2022
ICS
English Version
Aerospace series - Heat resisting nickel base alloy Ni-
Cr20Co3Fe3 - Rm  650 MPa - Sheets and strips, cold
rolled - 0,25 mm < a  3 mm

Série aérospatiale - Alliage résistant à chaud à base de Luft- und Raumfahrt - Hochwarmfeste Nickellegierung

nickel Ni Cr20Co3Fe3 - Rm  650 MPa - Tôles et Ni Cr20Co3Fe3 - Rm  650 MPa - Bleche und Bänder,

bandes, laminées à froid - 0,25 mm < a  3 mm kaltgewalzt - 0,25 mm < a  3 mm

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2302:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 2302:2022
prEN 2302:2022 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Requirements ................................................................................................................................................... 5

Bibliography ................................................................................................................................................................... 8

-------------
...