iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TS CEN/TS 14567:2005

(Main)

Postal services - Automated processing of mail items - Address block locator

Postal services - Automated processing of mail items - Address block locator

This Technical Specification defines a set of physical marks called Address Block Locators (ABLs). ABLs are marks, printed in the vicinity of addresses on postal items, that are intended to facilitate automatic recognition of address location and processing of the addresses on mail sorting and video-coding equipment.
The Technical Specification describes two families of ABLs which may be printed on all types of postal items, including letters, flats and parcels.
In the first family, address block locators take the form of pictograms which bear no other information than being a landmark for the address block. One such pictogram is defined herein for use in association with the delivery address block. It may be printed at the same time as the address or pre-printed on an envelope, an insert, or a label, with the address being printed, on the same physical support, at a later stage.
The second family covers address block locators which contain an encoded specification of the address block type and location and which can also be used for encoding other data, not directly related to address block location. Such data may include addressee or postal item identifiers, routing data, non-delivery instructions, a return address and references or other data which are relevant for either the mailer or the addressee. It may also include address checking data which may be used to verify correct interpretation of the printed address by the OCR system. In this family, three types of ABL are defined: one based on a pattern of alphanumeric characters; one on a linear bar code and one based on two-dimensional symbologies. These locators can be applied to the delivery address block and to forwarding or return address blocks. They will normally be printed within the same process as the address itself.
The Technical Specification is intended to be used by:
-   mailers, during the production of mail;
(....)

Postalische Dienstleistungen - Automatische Verarbeitung von Sendungen - Erkennung des Adressblocks

Diese Technische Spezifikation definiert einen Satz physischer Markierungen, die Adressblocklokalisierer (ABL) genannt werden. ABL sind Markierungen, die in der Nähe der Adresse auf Postsendungen aufgedruckt werden und die die automatische Erkennung der Adressposition und die Bearbeitung von Adressen mit Verteilungs- und Videocodiergeräten erleichtern sollen.
Die Technische Spezifikation beschreibt zwei ABL-Gruppen, die auf allen Arten von Postsendungen, ein-schließlich Briefen, Großbriefen und Paketen, aufgedruckt werden können.
Zu der ersten Gruppe gehören ABL, die wie Piktogramme aussehen und keine weiteren Informationen enthalten. Sie dienen lediglich als Markierung für den Adressblock. Ein solches Piktogramm ist in diesem Dokument zur Verwendung mit einem Zustelladressblock definiert. Es kann gleichzeitig mit der Adresse gedruckt werden oder vorab auf einem Umschlag, einer Einlage oder einem Etikett, wobei die Adresse später auf dem gleichen physischen Adressenträger aufgedruckt wird.
Die zweite Gruppe umfasst Adressblocklokalisierer, die eine codierte Spezifikation der Art und Position des Adressblocks enthalten und die auch zur Codierung anderer Angaben, die nicht direkt mit der Adressblockerkennung zu tun haben, verwendet werden können. Derartige Angaben könnten Empfänger- und Sendungskennungen sein, Leitdaten, Anweisungen für den Fall der Nichtzustellbarkeit, eine Rücksendeadresse und Verweise oder andere Daten, die für den Versender oder den Empfänger relevant sind. Es könnten auch Adressprüfdaten auf dem ABL enthalten sein, die dazu dienen könnten sicherzustellen, dass die gedruckte Adresse von dem OCR-System richtig interpretiert wird. In dieser Gruppe gibt es drei unterschiedliche ABL-Arten: die erste Art besteht aus einem Muster alphanumerischer Zeichen; die zweite aus einem linearen Strichcode und die dritte aus zweidimensionalen Symbologien. Diese Lokalisierer können sowohl auf dem Zustelladressblock als auch auf dem Nachsende- oder dem Rücksendea

Services postaux - Traitement automatique des envois postaux - Localisateur d'adresse postale

La présente Spécification technique définit un ensemble de marques physiques appelées localisateurs de bloc d'adresse. Les localisateurs de bloc d'adresse sont des marques imprimées a proximité des adresses sur les envois postaux et destinées a faciliter la reconnaissance automatique de l'emplacement et du traitement des adresses sur les équipements de tri du courrier et de vidéo-codage.
La présente Spécification technique décrit deux familles de localisateurs de bloc d'adresse qui peuvent etre imprimés sur tous types d'envois postaux, y compris lettres, surfaces planes et colis.
Dans la premiere famille, les localisateurs de bloc d'adresse se présentent sous la forme de pictogrammes qui ne sont que des points de repere pour les blocs d'adresse et ne comportent pas d'autre information. L'un de ces pictogrammes est décrit ci-apres pour etre utilisé en association avec le bloc d'adresse de distribution. Il peut etre imprimé en meme temps que l'adresse ou pré-imprimé sur une enveloppe, un insert ou une étiquette, l'adresse étant imprimée sur le meme support physique lors d'une étape ultérieure.
La seconde famille couvre des localisateurs de bloc d'adresse qui contiennent une spécification codée du type et de l'emplacement du bloc d'adresse et qui peuvent également etre utilisés pour le codage d'autres données qui ne sont pas directement liées a l'emplacement du bloc d'adresse. Ces données peuvent inclure des identificateurs de destinataire ou d'envoi postal, des données d'itinéraire, des instructions en cas de non expédition, une adresse de retour et des références ou d'autres données pertinentes pour l'expéditeur ou le destinataire. Elles peuvent également inclure des données de vérification d'adresse qui peuvent etre utilisées pour vérifier l'interprétation correcte de l'adresse imprimée par le systeme OCR. Dans cette famille, trois types de localisateurs de bloc d'adresse sont définis : le premier est fondé sur un modele de caracteres alphanumériques, le second s

Poštne storitve – Avtomatsko usmerjanje poštnih pošiljk - Lokator naslovnega polja

General Information

Status
Published
Publication Date
31-Dec-2004
ICS
03.240 - Postal services
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2005
Due Date
01-Jan-2005
Completion Date
01-Jan-2005
Directive
2002/39/EC - Directive 2002/39/EC of the European Parliament and of the Council of 10 June 2002 amending Directive 97/67/EC with regard to the further opening to competition of Community postal services
Mandate
M/240 - Mandate to CEN for standardisation in the field of postal services and equipment
Ref Project
CEN/TS 14567:2004 - Postal services - Automated processing of mail items - Address block locator

Buy Standard

TS CEN/TS 14567:2005TS CEN/TS 14567:2005
PreviousNext
Technical specification
TS CEN/TS 14567:2005
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 14567:2005
01-januar-2005
Poštne storitve – Avtomatsko usmerjanje poštnih pošiljk - Lokator naslovnega
polja
Postal services - Automated processing of mail items - Address block locator
Postalische Dienstleistungen - Automatische Verarbeitung von Sendungen - Erkennung
des Adressblocks
Services postaux - Traitement automatique des envois postaux - Localisateur d'adresse
postale
Ta slovenski standard je istoveten z: CEN/TS 14567:2004
ICS:
03.240 Poštne storitve Postal services
SIST-TS CEN/TS 14567:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 6 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 7 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 8 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 9 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 10 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 11 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 12 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 13 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 14 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 15 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 16 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 17 ----------------------

SIST-TS CEN/TS 14567:2005

---------------------- Page: 18 ----------------------

SIST-TS CEN/TS 14567:2005

--------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TS CEN/TS 14631:2005(Main)
Postal services - Automatic identification of receptacles and containers - Receptacle asset numbering
CEN/TS 14631:2005

This Technical Specification defines a mechanism for the unique identification of individual receptacles. It specifies the method of construction of the identifier, referred to as the receptacle asset number, and defines one required and a number of optional methods by which this identifier can be associated with (affixed to) the receptacle itself.
The receptacle asset number is defined in accordance with the specification of ISO/IEC 15418 data identifier number 5B, which defines a Receptacle Asset Number or container identifier constructed in accordance with the hierarchical principles defined in ISO/IEC 15459.
The specification also identifies a number of receptacle attributes, or characteristics, which it may be useful to communicate between parties making use of the receptacle concerned.
A coded representation of one of these attributes - equipment qualifier - is integrated into the structure of the receptacle asset number. The others are not defined in detail in this document. Precise definitions and encoding formats for them will be developed over time, as a result of practical experience of use of the specification. The definitions will be included in an appropriate reference specification, such as UPU standards S25 [17] and M82 [10], which serve as baseline definition documents for attributes used in postal industry communications about postal items, mail aggregates and receptacles.
The application of this specification is voluntary in the sense that receptacles are not required to be individually identified.
NOTE 1   Not all receptacles need to have a receptacle identifier. In particular, in today's environment, mailbags and disposable trays are not normally identified explicitly - rather their contents are. Many posts are, however, starting to individually identify more valuable receptacles and this practice is expected to spread, including to trays, as the advantages of being able to individually track and control receptacle movement become more appa

  • Technical specification
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 14442:2005(Main)
Postal services - Automated processing of mail items - Facing identification marks
CEN/TS 14442:2003

The purpose of this Technical Specification is to define a facing identification mark (FIM), with procedures for its use, which can be used by any postal operator. It is primarily addressed to those postal operators that have not yet implemented the use of FIMs for automated facing and has been designed to minimise conflict with FIM marks that are already in use. Nevertheless, operators with existing FIMs are encouraged to consider support for migration onto this Technical Specification as and when they upgrade or replace facing equipment.
Use of the standard FIM offers the possibility for automated preparation of letters which do not carry a stamp and which arrive, in a postal facility, without being faced. These items can them be included in the domestic and international mechanised streams of mail.
This Technical Specification allows facer-cancellers and culler-facer-cancellers (or other automated equipment supporting the mail preparation function), to detect bar code-type marks enabling those machines to face and cancel items carrying the FIM. Through the incorporation of a coded value, called the FIM-code, this Technical Specification also supports segregation of FIM-marked items into up to 18 separate streams. This capability can be used to facilitate revenue control by allowing items to be segregated according the type of revenue control procedure required. For example, Business Reply items could be separated and allow accounting and cancellation to take place before, rather than after, the items are transported to their delivery office. This would simplify controls designed to prevent the sending of business reply items to addresses in other countries. However, it should be recognized that FIMs have no in-built security and an item may carry an inappropriate FIM code, resulting in it being placed in the wrong processing stream. Hence, in particular, the FIM alone cannot be relied upon as providing evidence of payment.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 14773:2005(Main)
Postal services - Quality of service - Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters
CEN/TS 14773:2004

This document specifies methods for measuring the level of loss and substantial delay, using a survey of test letters, of domestic and cross-border priority and first class single piece letter mail, collected, processed and distributed by postal service operators.
It is impossible in practice to distinguish between items which will never arrive and items which have been delayed for a very long time. A minimum period is therefore defined after which an item that has been sent shall be treated as if it has been lost or substantially delayed for the purposes of measurement.
The resulting overall figure for loss and substantial delay is to be expressed as a percentage of the total posted priority and first class single piece mail. This indicator does not measure the postal operator's overall performance in a way which provides direct comparison of postal service operators, and does not include other service performance indicators other than those related to loss and substantial delay.
According to this document, loss and substantial delay is estimated within specified accuracy limits. When the level of loss is very small it may only be possible to estimate an upper limit for the level of loss.
This document has been developed from and is compatible with the requirements of EN 13850 for the measurement of the transit time of end-to-end services for single piece priority mail and first class mail, so that the same survey may be used to measure loss and substantial delay and on-time performance. Thus it comprises a set of requirements for the design of a measuring system involving the selection and distribution of test letters sent and received by selected panellists, according to a specification that ensures that the test letter sample design is representative of the real mail flows.

  • Technical specification
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19160-4:2023(Main)
Addressing - Part 4: International postal address components and template language (ISO 19160-4:2023)
EN ISO 19160-4:2023

ISO 19160-4:2017 defines key terms for postal addressing, postal address components and constraints on their use.
Specifically, ISO 19160-4:2017 defines postal address components organized into three hierarchical levels:
-      elements, such as organization name or postcode, which have well-defined conceptual meaning and are not themselves made up of subordinate components, though they may be sub-divided for technical purposes;
-      constructs, such as organization identification, which group elements into units form a logical portion of a postal address;
-      segments, such as addressee specification, which group-related postal address constructs and/or postal address elements into units with a specific defined function.
ISO 19160-4:2017 also specifies a mechanism for creation of sub-elements, which correspond to either sub-divisions of element content, such as door type or door indicator or to multiple occurrences and locations of elements in an address, such as levels of administrative regions.
ISO 19160-4:2017 does not specify the length of any component nor the value range of any component.
Moreover, ISO 19160-4:2017 defines the codes to identify elements and sub-elements.
Further, ISO 19160-4:2017 specifies postal address rendering rules. This includes identification and ordering of output lines in a rendered address, conditions for selection of candidate lines, the order and concatenation of postal address components, required and optional components, parameters to contextualize address for rendering and the formatting of the components, subject to constraints on the space available for that task. Postal address rendering rules are represented in ISO 19160-4:2017 as a postal address template.
Finally, ISO 19160-4:2017 specifies language suitable for computer processing to formally express postal address templates.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 14826:2022(Main)
Postal services - Automatic identification of items - Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks
CEN/TS 14826:2022

This document:
- specifies a methodology for the measurement of defined print quality attributes of Digital Postage Marks in the form of two-dimensional bar code symbols on mail-pieces,
- defines methods for grading the results of these measurements and deriving an overall symbol quality grade as a guide to estimating the readability of the Digital Postage Marks,
- provides guidelines for printing and gives information on possible causes of deviation from high grades to assist users in taking appropriate corrective action,
- defines a test procedure for the assessment of printing systems for the production of Digital Postage Marks.
These provisions apply to the Digital Postage Mark blocks as they appear on fully produced mail items when remitted to postal operators, including the characteristics resulting from operations other than printing per se that affect their appearance to a mail processing system (covering, inserts into transparent window envelopes, affixed Digital Postage Mark labels). This document does not define the qualification tests or sampling requirements necessary to determine the practical feasibility of any specific read rate.

  • Technical specification
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17535:2021(Main)
Requirements to connect, access, participate and further develop open global networks and systems, for postal operators and the wider postal sector players
CEN/TR 17535:2020

The current and future infrastructure to satisfy the changing needs of citizens in the EU will grant access
to wider postal stakeholders, including customers, postal suppliers, supply chain service providers, (i.e.
customs, fiscal authorities collecting VAT and related duties, transport providers like airlines or rail road
and other transport mode operators, non-profit organisations supporting supply chain traceability, etc.)
non-designated economic postal operators (Courier-, Express-, and Parcel delivery operators) that use,
or may wish to use products, services and solutions currently restricted to designated operators.
This document aims at the provision of a Single Digital Market in Europe is at the focus within CEN, in
particular:
• maintaining the integrity and independence of the European and worldwide delivery network
• no unfair advantage to any group or individual player, and thereby providing a level playing field
• clear delineation of the responsibilities and roles of all entities involved
• transparent management, control and integration of the postal supply chain as legally described in
EU legislation (EU Regulation 2018/644 on cross-border parcel delivery services)
• reciprocity of interconnection with other stakeholder networks, as applicable
• proper security mechanisms in place to ensure data protection and privacy
to provide the necessary implementation guidance of EAD for fiscal duties (VAT et al.), customs and
transport security.
The current MoU between the UPU and CEN offers the foundation to convert UPU specifications only
applicable to designated postal operators into open CEN specifications. The creation of a digital single
market has significant implications on cross border commerce and related delivery of merchandise.
This document provides the necessary implementation guidance. It is based on be the technical report
“Postal Services — Electronic advanced data (EAD) in postal operations compliant to security and
customs requirements”.
The document is based on the semantic mapping description of information on the characteristics or
attributes of Low Value Consignments (LVC) which parties in the digital commercial value chain acrossborders
are called upon to handle, compliant to the EU VAT Ecommerce Package as well as the UPU-WCO
customs model. It gives guidance by defining the use of unique transport identifiers, unique transaction
identifiers and the IOSS VAT Identification number.

  • Technical report
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17536:2021(Main)
Requirements for electronic advanced data (EDA) in postal operations, in particular compliant to security and customs requirements
CEN/TR 17536:2020

This document provides the semantic mapping description of information on the characteristics or
attributes of Low Value Consignments (LVC) which parties in the digital commercial value chain acrossborders
are called upon to handle, compliant to the EU VAT Ecommerce Package as well as the UPU-WCO
customs model.
This document is limited to LVC, the logical definition of an electronic message, which supports the
communication of information about postal items with a unique transport unit identifier.
While different customs processes apply to LVC (goods ≤ €150), and consignments exceeding an intrinsic
value of > €150, this technical specification only applies to LVC. Therefore, it applies to the collection of
import duties (VAT) and not to customs fees.
The document defines both EDIFACT directory 00A and XML implementations to bridge in a semantic
mapping between UPU M33 ITMATT messages and the EU customs data model and its super-reduced
data set, that can be used to convey item-level data for use in customs processing applications.
The document specifies that the supply of certain attribute values, segments and tags is mandatory (M),
whilst the supply of other attributes, segments and tags is specified as optional (O).
This document separates the financial, the data-elements and the physical flow of low value
consignments. Further it defines the use of unique transport identifiers, unique transaction identifiers
and the IOSS VAT Identification number.

  • Technical report
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17523:2020(Main)
Postal services - Packaging for boxable items - Characteristics for packaging of small and light weight items to be delivered into the consumer’s letterbox
CEN/TS 17523:2020

This document covers physical properties and characteristics for the packaging for small and light weight postal items to be delivered into the consumer’s letterbox. It covers the main design features for the packaging of letterboxable postal items, notably the sizes and stacking as well as postal and environmental requirements.
This document is targeted to e-retailers and postal operators.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17073:2020/AC:2020(Corrigendum)
Postal services - Interfaces for cross border parcels
CEN/TS 17073:2020/AC:2020

2020-07-08 - TC - Correction of two formats in rows "Item identifier" and "Additional barcode" in Table 1

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13850:2020(Main)
Postal services - Quality of services - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail
EN 13850:2020

This European Standard specifies methods for measuring the end-to-end transit time of domestic and cross-border Single Piece Priority Mail (SPPM), collected, processed and delivered by postal service operators. It considers methods using representative end-to-end samples for all types of single piece priority mail services for addressed mail with defined transit-time service levels offered to the customer. This standard is applicable to the measurement of End-to-End priority mail services.
The standardized QoS-measurement method provides a uniform way for measuring the end-to-end transit time of postal items. Using a standardized measurement method will assure that the measurement will be done in an objective and equal way for all operators in accordance with the requirements of the Postal Directive 97/67/EC and its amendments.
This European Standard is mandatory and mainly used for performance measurement connected to requirements of the Universal Postal Service; domestic and international (UNEX).

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    122 pages
    English language
    sale 10% off
    e-Library read for
    1 day