SIST EN 60966-2-4:2016

Cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors (IEC 60966-2-4:2016)

EN-IEC 60966-2-4 is a detail specification which applies to flexible coaxial cables described in the IEC 61196 series. It relates to cable assemblies for radio and TV receivers, and in particular to the cable assemblies subfamily 9,52 (IEC 61169-2). These cable assemblies are used as described in IEC 60728-4. This part of IEC 60966 gives subfamily requirements and severities which shall be applied. Under qualification approval, the qualification will be conducted in accordance with 12.2 of IEC 60966-2-1:2008 taking into account the specified variants. Only the tests whose results might depend on the variants will be repeated. Under capability approval, the qualification will be conducted on the related capability qualifying components (CQCs) as defined in 12.3 of IEC 60966-2-1:2008 and described in the capability manual (CM). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in 12.3 of IEC 60966-2-1:2008 and described in the CM.

Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-4: Bauartspezifikation für konfektionierte Kabel für Ton- und Fernsehrundfunkempfänger - Frequenzbereich 0 MHz bis 3 000 MHz, Steckverbinder nach IEC 61169-2

Cordons - Partie 2-4: Spécification particulière relative aux cordons pour récepteurs de télévision ou radio - Plage de fréquences 0 MHz à 3 000 MHz, connecteurs IEC 61169-2

L'IEC 60966-2-4:2016 est une spécification particulière qui s'applique aux câbles coaxiaux souples décrits dans la série IEC 61196. Elle concerne les cordons pour les récepteurs de télévision ou radio, et en particulier la sous-famille de cordons 9,52 (IEC 61169-2). Ces cordons sont utilisés comme cela est décrit dans l'IEC 60728-4. La présente partie de l'IEC 60966 indique les exigences relatives aux sous-familles et les sévérités qui doivent être appliquées. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente.
a) Les exigences d'affaiblissement de réflexion et les exigences de perte d'insertion sont adaptées aux câbles correspondants.
b) L'efficacité d'écran doit être mesurée conformément à la méthode triaxiale donnée dans l'IEC 62153-4-7.
c) La classe d'écran B a été supprimée.
Cette publication doit être lue conjointement avec la IEC 60966-1:1999, IEC 60966-2-1:2008 et IEC 60966-2-2:2003.

Kabelski sestavi - 2-4. del: Podrobna specifikacija za kabelske sestave za radijske in TV sprejemnike - Konektorji IEC 61169-2 za frekvenčno območje od 0 do 3 000 MHz (IEC 60966-2-4:2016)

EN-IEC 60966-2-4 je podrobna specifikacija, ki se uporablja za gibke koaksialne kable, opisane v skupini standardov IEC 61196. Nanaša se na kabelske sestave za radijske in TV sprejemnike ter zlasti na kabelske sestave podskupine 9,52 (standard IEC 61169-2). Uporaba teh kabelskih sestavov je opisana v standardu IEC 60728-4. Ta del standarda IEC 60966 obravnava zahteve za podskupine in stopnje zahtevnosti, ki jih je treba upoštevati. V okviru potrjevanja ustreznosti bo kvalifikacija izvedena v skladu z delom 12.2 standarda IEC 60966-2-1:2008, pri čemer bodo upoštevane določene različice. Ponovljeni bodo samo preskusi, katerih rezultati so lahko odvisni od različic. V okviru potrjevanja zmogljivosti bo kvalifikacija izvedena za povezane komponente s kvalificirano zmogljivostjo (CQC), kot je opredeljeno v delu 12.3 standarda IEC 60966-2-1:2008 in opisano v priročniku za zmogljivost (CM). Razen če je v priročniku za zmogljivost navedeno drugače, bodo za dobavljene proizvode izvedeni samo posamezni preskusi iz skupin Ba in Eb, vsi drugi preskusi pa bodo izvedeni za komponente s kvalificirano zmogljivostjo, kot je opredeljeno v delu 12.3 standarda IEC 60966-2-1:2008 in opisano v priročniku za zmogljivost (CM).

General Information

• Status: Published
• Publication Date: 16-Aug-2016
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 28-Jul-2016
• Due Date: 02-Oct-2016
• Completion Date: 17-Aug-2016
• Ref Project: EN 60966-2-4:2016 - Radio Frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors

Relations

• Replaces: SIST EN 60966-2-4:2009 - Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors (IEC 60966-2-4:2009)
• Effective Date: 26-Jul-2016
• Replaces: SIST EN 60966-2-4:2009 - Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors (IEC 60966-2-4:2009)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60966-2-4:2016
01-oktober-2016
1DGRPHãþD
SIST EN 60966-2-4:2009
.DEHOVNLVHVWDYLGHO3RGUREQDVSHFLILNDFLMD]DNDEHOVNHVHVWDYH]DUDGLMVNH
LQ79VSUHMHPQLNH.RQHNWRUML,(&]DIUHNYHQþQRREPRþMHRGGR
0+],(&
Cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV
receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors (IEC 60966-
2-4:2016)
Cordons - Partie 2-4: Spécification particulière relative aux cordons pour récepteurs de
télévision ou radio - Plage de fréquences 0 MHz à 3 000 MHz, connecteurs IEC 61169-2
Ta slovenski standard je istoveten z: EN 60966-2-4:2016
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60966-2-4:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60966-2-4:2016

---------------------- Page: 2 ----------------------

SIST EN 60966-2-4:2016


EUROPEAN STANDARD EN 60966-2-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2016
ICS 33.120.10 Supersedes EN 60966-2-4:2009
English Version
Radio Frequency and coaxial cable assemblies - Part 2-4: Detail
specification for cable assemblies for radio and TV receivers -
Frequency range 0 MHz to 3 000 MHz, IEC 61169-2
connectors
(IEC 60966-2-4:2016)
Cordons coaxiaux et cordons pour fréquences Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-4:
radioélectriques - Partie 2-4: Spécification particulière Bauartspezifikation für konfektionierte Kabel für Ton- und
relative aux cordons pour récepteurs de télévision ou radio - Fernsehrundfunkempfänger - Frequenzbereich 0 MHz bis 3
Plage de fréquences de 0 MHz à 3 000 MHz, connecteurs 000 MHz, Steckverbinder nach IEC 61169-2
IEC 61169-2 (IEC 60966-2-4:2016)
(IEC 60966-2-4:2016)
This European Standard was approved by CENELEC on 2016-06-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60966-2-4:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60966-2-4:2016
EN 60966-2-4:2016
European foreword
The text of document 46/599/FDIS, future edition 4 of IEC 60966-2-4, prepared by IEC/TC 46 "Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60966-2-4:2016.

The following dates are fixed:
(dop) 2017-03-22
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-06-22
standards conflicting with the
document have to be withdrawn


This document supersedes EN 60966-2-4:2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60966-2-4:2016 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 60966-2-4:2016
 EN 60966-2-4:2016

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60728-4 -  Cable networks for television signals, EN 60728-4 -
sound signals and interactive services --
Part 4: Passive wideband equipment for
coaxial cable networks
IEC 60966-1 -  Radio frequency and coaxial cable EN 60966-1 -
assemblies -- Part 1: Generic specification
- General requirements and test methods
IEC 60966-2-1 2008 Radio frequency and coaxial cable EN 60966-2-1 2009
assemblies -- Part 2-1: Sectional
specification for flexible coaxial cable
assemblies
IEC 60966-2-2 2003 Radio frequency and coaxial cable EN 60966-2-2 2003
assemblies -- Part 2-2: Blank detail
specification for flexible coaxial cable
assemblies
IEC 61169-2 -  Radio-frequency connectors -- Part 2: EN 61169-2 -
Sectional specification - Radio frequency
coaxial connectors of type 9,52
IEC 61196-6 -  Coaxial communication cables - Part 6: - -
Sectional specification for CATV drop
cables
IEC 62153-4-7 -  Metallic communication cable test methods EN 62153-4-7 -
-- Part 4-7: Shielded screening attenuation
test method for measuring the transfer
impedence ZT and the screening
attenuation aS or the coupling attenuation
aC of RF-Connectors and asemblies up to
and above 3 GHz, Tube in tube method

3

---------------------- Page: 5 ----------------------

SIST EN 60966-2-4:2016

---------------------- Page: 6 ----------------------

SIST EN 60966-2-4:2016




IEC 60966-2-4

®


Edition 4.0 2016-05




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Radio frequency and coaxial cable assemblies –

Part 2-4: Detail specification for cable assemblies for radio and TV receivers –

Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors




Cordons coaxiaux et cordons pour fréquences radioélectriques –

Partie 2-4: Spécification particulière relative aux cordons pour récepteurs de


télévision ou radio – Plage de fréquences de 0 MHz à 3 000 MHz, connecteurs

IEC 61169-2












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.120.10 ISBN 978-2-8322-3411-2



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60966-2-4:2016
– 2 – IEC 60966-2-4:2016 © IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5

---------------------- Page: 8 ----------------------

SIST EN 60966-2-4:2016
IEC 60966-2-4:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –

Part 2-4: Detail specification for cable
assemblies for radio and TV receivers –
Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that
...