SIST EN 12062:1998/A2:2004
(Amendment)Non-destructive examination of welds - General rules for metallic materials
Non-destructive examination of welds - General rules for metallic materials
Based on quality requirements, material, weld thickness, welding process and extent of examination, this standard gives guidance for the choice of non-destructive examination methods of welds and evaluation of the results for quality control purposes. This standard also specifies general rules and standards to be applied to the different types of examination, for either the methodology or the acceptance level for metallic materials. Acceptance levels cannot be a direct interpretation of the quality levels defined in EN 25817 or EN 30042. They are linked to the overall quality of the produced batch of welds. Requirements for acceptance levels for non-destructive examination comply with quality levels stated in EN 25817 or EN 30042 (moderate, indermediate, stringent), only on a general basis and not in detail for each indication. This standard can be used by application standards or by agreement between the contracting parties.
Zerstörungsfreie Prüfung von Schweißverbindungen - Allgemeine Regeln für metallische Werkstoffe
Contrôle non destructif des assemblages soudés - Regles générales pour les matériaux métalliques
Neporušitvene preiskave zvarnih spojev - Splošna pravila za kovinske materiale
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12062:1998/A2:2004
01-junij-2004
Neporušitvene preiskave zvarnih spojev - Splošna pravila za kovinske materiale
Non-destructive examination of welds - General rules for metallic materials
Zerstörungsfreie Prüfung von Schweißverbindungen - Allgemeine Regeln für metallische
Werkstoffe
Contrôle non destructif des assemblages soudé
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.