Steel for the reinforcement of concrete - Galvanized reinforcing steel products

This document specifies requirements for hot-dip galvanized reinforcing steel in the form of products which meet the requirements of EN 10080 and subjected, where appropriate, to further processing, e.g. bars, bent bars, stirrups, products straightened from coils, products cut from bars, welded structures and any other components fabricated for use in the reinforcement of concrete.
This document does not apply to hot dip galvanized reinforcement for pre-stressing or components of these reinforcements.

Stahl für die Bewehrung von Beton - Verzinkte Betonstahlerzeugnisse

Dieses Dokument legt Anforderungen an feuerverzinkten Betonstahl in Form von Erzeugnissen nach EN 10080 die, falls zutreffend, zur Weiterverarbeitung bestimmt sind, wie z. B. gebogene Stäbe, Bügel, gerichtete Erzeugnisse aus Ringen, abgelängte Stäbe, geschweißte Profilträger sowie andere Erzeugnisse, die für die Bewehrung von Beton eingesetzt sind, fest.  
Dieses Dokument gilt nicht für feuerverzinkte Bewehrungen zum Vorspannen oder Bestandteile für diese Bewehrungen.

Aciers pour béton armé - Produits en acier galvanisés pour l'armature du béton

Le présent document spécifie les exigences relatives aux aciers galvanisés par immersion à chaud pour béton armé sous la forme de produits conformes aux exigences de l’EN 10080 et soumis, le cas échéant, à une transformation ultérieure par exemple barres, barres cintrées, étriers, produits redressés à partir de couronnes, produits découpés dans des barres, structures soudées et tous les autres composants fabriqués pour une utilisation dans l'armature du béton.
Le présent document ne s’applique pas aux armatures de précontrainte galvanisées par immersion à chaud ou aux composants de ces armatures.

Jekla za armiranje betona - Pocinkana jekla za armiranje izdelkov

Ta dokument določa zahteve za vroče pocinkano jeklo za armiranje izdelkov, ki izpolnjuje zahteve standarda EN 10080 in je namenjeno, kjer je primerno, nadaljnji obdelavi, npr. palice, upognjene palice, stremena, izdelki, izravnani iz navitij, izdelki, izrezani iz palic, varjene konstrukcije in vse druge komponente, ki so izdelane za uporabo pri armiranju betona.
Ta dokument se ne uporablja za vroče pocinkana jekla za armiranje za prednapetje ali komponente teh ojačitev.

General Information

Status
Published
Public Enquiry End Date
25-Apr-2023
Publication Date
22-Apr-2024
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Apr-2024
Due Date
16-Jun-2024
Completion Date
23-Apr-2024

Relations

Buy Standard

Standard
EN 10348:2024
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 10348:2023
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10348:2024
01-junij-2024
Jekla za armiranje betona - Pocinkana jekla za armiranje izdelkov
Steel for the reinforcement of concrete - Galvanized reinforcing steel products
Stahl für die Bewehrung von Beton - Verzinkte Betonstahlerzeugnisse
Aciers pour béton armé - Produits en acier galvanisés pour l'armature du béton
Ta slovenski standard je istoveten z: EN 10348:2024
ICS:
77.140.15 Jekla za armiranje betona Steels for reinforcement of
concrete
SIST EN 10348:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 10348:2024

---------------------- Page: 2 ----------------------
SIST EN 10348:2024


EN 10348
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2024
EUROPÄISCHE NORM
ICS 77.140.15 Supersedes EN 10348-2:2018
English Version

Steel for the reinforcement of concrete - Galvanized
reinforcing steel products
Aciers pour béton armé - Produits en acier galvanisés Stahl für die Bewehrung von Beton - Verzinkte
pour l'armature du béton Betonstahlerzeugnisse
This European Standard was approved by CEN on 29 January 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10348:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 10348:2024
EN 10348:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols . 5
5 Materials . 6
5.1 Reinforcing steel . 6
5.2 Zinc melt . 6
5.3 Repair material . 6
6 Designation. 6
7 Information to be supplied at the time of enquiry and order . 6
8 Galvanizing . 7
8.1 Coating application . 7
8.2 Renovation . 7
9 Performance characteristics .
...

SLOVENSKI STANDARD
oSIST prEN 10348:2023
01-april-2023
Jekla za armiranje betona - Pocinkana jekla za armiranje izdelkov
Steel for the reinforcement of concrete - Galvanized reinforcing steel products
Stahl für die Bewehrung von Beton - Verzinkte Betonstahlerzeugnisse
Aciers pour béton armé - Produits en acier galvanisés pour l'armature du béton
Ta slovenski standard je istoveten z: prEN 10348
ICS:
77.140.15 Jekla za armiranje betona Steels for reinforcement of
concrete
oSIST prEN 10348:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 10348:2023

---------------------- Page: 2 ----------------------
oSIST prEN 10348:2023


DRAFT
EUROPEAN STANDARD
prEN 10348
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2023
ICS 77.140.15 Will supersede EN 10348-2:2018
English Version

Steel for the reinforcement of concrete - Galvanized
reinforcing steel products
Aciers pour béton armé - Produits en acier galvanisés Stahl für die Bewehrung von Beton - Verzinkte
pour l'armature du béton Betonstahlerzeugnisse
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 4.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10348:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 10348:2023
prEN 10348:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols . 5
5 Materials . 6
5.1 Reinforcing steel . 6
5.2 Zinc melt . 6
5.3 Repair material . 7
6 Designation. 7
7 Information to be supplied at the time of enquiry and order . 7
8 Galvanizing . 7
8.1 Coating application .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.