SIST EN 60966-3:2009
(Main)Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:2008)
Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:2008)
This part of IEC 60966 is a sectional specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It establishes uniform requirements for testing the electrical, mechanical and climatic properties of flexible cable assemblies composed of flexible coaxial cables and coaxial connectors. NOTE 1 For the purposes of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification should be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 3: Rahmenspezifikation für halbflexible konfektionierte Koaxialkabel (IEC 60966-3:2008)
Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques - Partie 3: Spécification intermédiaire pour cordons coaxiaux semi-flexibles (CEI 60966-3:2008)
La CEI 60966-3:2008 est une spécification intermédiaire qui concerne les cordons coaxiaux semi-flexibles fonctionnant dans le mode électromagnétique transversal (TEM). Elle établit des exigences uniformes pour l'essai des propriétés électriques, mécaniques et climatiques de cordons flexibles composés de câbles coaxiaux flexibles et de connecteurs coaxiaux. La présente spécification intermédiaire doit être lue conjointement avec la deuxième édition de la CEI 60966-1 (1999). Elle contient les mêmes articles que la CEI 60966-1 et les complète ou les modifie lorsque cela est nécessaire. Lorsqu'un article de la CEI 60966-1 n'apparaît pas dans la présente norme, elle s'applique telle quelle dans la CEI 60966-1. Lorsque la présente norme indique un "ajout", une "modification" ou un "remplacement", le texte correspondant de la première partie doit être adapté en conséquence.
Cette publication doit être lue conjointement avec la CEI 60966-1:1999
Radijska frekvenca in sestavi koaksialnih kablov - 3. del: Področna specifikacija za sestave polzvijavih koaksialnih kablov (IEC 60966-3:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60966-3:2009
01-junij-2009
1DGRPHãþD
SIST EN 60966-3:2004
5DGLMVNDIUHNYHQFDLQVHVWDYLNRDNVLDOQLKNDEORYGHO 3RGURþQDVSHFLILNDFLMD]D
VHVWDYHSRO]YLMDYLKNRDNVLDOQLKNDEORY ,(&
Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-
flexible coaxial cable assemblies (IEC 60966-3:2008)
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 3: Rahmenspezifikation für
halbflexible konfektionierte Koaxialkabel (IEC 60966-3:2008)
Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques - Partie
3: Spécification intermédiaire pour cordons coaxiaux semi-flexibles (CEI 60966-3:2008)
Ta slovenski standard je istoveten z: EN 60966-3:2009
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60966-3:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60966-3:2009
---------------------- Page: 2 ----------------------
SIST EN 60966-3:2009
EUROPEAN STANDARD
EN 60966-3
NORME EUROPÉENNE
April 2009
EUROPÄISCHE NORM
ICS 33.120.10 Supersedes EN 60966-3:2003
English version
Radio frequency and coaxial cable assemblies -
Part 3: Sectional specification for semi-flexible coaxial cable assemblies
(IEC 60966-3:2008)
Ensembles de cordons coaxiaux Konfektionierte Koaxial-
et de cordons pour fréquences und Hochfrequenzkabel -
radioélectriques - Teil 3: Rahmenspezifikation
Partie 3: Spécification intermédiaire für halbflexible konfektionierte
pour cordons coaxiaux semi-flexibles Koaxialkabel
(CEI 60966-3:2008) (IEC 60966-3:2008)
This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60966-3:2009 E
---------------------- Page: 3 ----------------------
SIST EN 60966-3:2009
EN 60966-3:2009 - 2 -
Foreword
The text of document 46/264/CDV, future edition 3 of IEC 60966-3, prepared by IEC TC 46, Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60966-3 on
2009-04-01.
This European Standard supersedes EN 60966-3:2003.
The major change with respect to EN 60966-3:2003 is a better definition of the tests to be performed.
This sectional specification is to be read in conjunction with EN 60966-1:1999. It contains the same
clauses as that of EN 60966-1 and completes or amends them when required. When a clause of
EN 60966-1 does not appear in this standard, it applies as it is in EN 60966-1. When this standard states
"addition", "modification" or "replacement", the relevant text in Part 1 is to be adapted accordingly.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60966-3:2008 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 60966-3:2009
- 3 - EN 60966-3:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indisp
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.