JWG 10 - TC 65/SC 65C/JWG 10

IEC 61918:2018 specifies basic requirements for the installation of media for communication networks in industrial premises and within and between the automation islands, of industrial sites. This standard covers balanced and optical fibre cabling. It also covers the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in the IEC 61784-5 series.
This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the reference to ISO/IEC 24702 has been replaced with reference to the new ISO/IEC 11801-3; this affects Table 2;
b) some terms and abbreviated terms have been modified in Clause 3;
c) Subclauses 4.1.2, 4.4.2.5, 4.4.3.4.1 and 5.7 have been updated;
d) Figure 2 and Figure 3 have been updated; Figure 13, Figure 16, Figure 30 and Figure 49 have been added;
e) Table 7 has been updated;
f) Annex D and Annex M have been extended to cover additional communication profile families; Annex H has been extended to cover the M12-8 X-coding connector use;
g) Annex O has been modified by including references to the new edition of the
ISO/IEC 11801 series, ISO/IEC TR 11801-9902 and ISO/IEC 14763-4;
h) Annex P has been added.
This standard is to be used in conjunction with the IEC 61784-5 series with regard to the installation of communication profiles (CPs).

IEC 61784-5-20:2018 specifies the installation profiles for CPF 20 (ADS-net).
This contribution contains a number of related files covering the communication profiles to be used with IEC 61918.
This installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements. The installation profiles are specified in Annex A. This annex is read in conjunction with IEC 61918.

IEC 61784-5-3:2018 specifies the installation profiles for CPF 3 (PROFIBUS/PROFINET).
This contribution contains a number of related files covering the communication profiles to be used in conjunction with IEC 61918.
This installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918. This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) an addition of 4-pair cabling (see C.4.4.1.2.1and C.5.3.2);
b) an addition of the connector M12 X-Coding (see C.4.4.2.2);
c) an addition of the definition of End-to-end links (see C.4.4.3.1);
d) a revision of Table C.17 (see C.5.2.1);
e) a formula for the NEXT limits of End-to-end links (see C.6.3.2.1.2).

IEC 61784-5-8:2018 specifies the installation profiles for CPF 8 (CC-Link ).
This deliverable contains a number of related files covering the communication profiles to be used with IEC 61918.
This installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918.
This edition includes the following significant technical changes with respect to the previous edition:
a) The reference to ISO/IEC 24702 has been replaced with reference to the new ISO/IEC 11801-3;
b) Annex C has been extended to cover the balanced cabling based on Ethernet that is applicable to CP8/4. Table C.1, Table C.3, Table C.5 and Table C.8 are added;
c) Annex D has been extended to cover the M12-8 X-coding connector use that is applicable to CP/8/5. Table D.3 is revised.

IEC 61784-5-6:2018 specifies the installation profiles for CPF 6 (INTERBUS).
This contribution contains a number of related files covering the communication profiles to be used in conjunction with IEC 61918.
This installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018 This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with IEC 61918:2018;
b) addition of new connectors.

IEC 61784-5-21:2018 specifies the installation profiles for CPF 21 (FL-net).
This contribution contains a number of related files covering the communication profiles to be used with IEC 61918.
This installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements. The installation profiles are specified in Annex A. This annex is read in conjunction with IEC 61918.

IEC 61784-5-2:2018 specifies the installation profiles for CPF 2 (CIP™ ). This contribution contains a number of related files covering the communication profiles to be used in conjunction with IEC 61918. The installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918. This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) references to ISO/IEC 24702 have been replaced with references to ISO/IEC 11801-3 in Table B.1;
b) errors have been corrected;
c) Tables B11 and B13 have been added in support of 1,000 Mb/s 4 Pair Ethernet;
d) Clarification of dual power supplies for Annex C.

IEC 61784-5-12:2018 specifies the installation profiles for CPF 12 (EtherCAT™) .
This deliverable contains a number of related files covering the communication profiles to be used in conjunction with IEC 61918.
This installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements. The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of connectors (see A.4.4.2.2);
b) alignment with IEC 61918.

IEC 61784-5-15:2010 specifies the installation profiles for CPF 15/1 (MODBUS -TCP) and CPF 15/2 (RTPS).The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2010. This bilingual version (2012-02) corresponds to the monolingual English version, published in 2010-07.
This publication is to be read in conjunction with IEC 61918:2010.

Discusses the concepts used in 61346-1 with a life cycle story of an 'object' as a basis.

IEC 61784-5-10:2010 specifies the installation profiles for CPF 10 (Vnet/IP ).The installation profiles are specified in the annex. This second edition cancels and replaces the first edition published in 2007. It constitutes an editorial revision. This edition does not include technical changes with respect to the previous edition. This bilingual version (2012-02) corresponds to the monolingual English version, published in 2010-07.
This publication is to be read in conjunction with IEC 61918:2013.

IEC 61784-5-4:2010 specifies the installation profiles for CPF 4 (P-NET). The installation profiles are specified in the annexes. This bilingual version (2012-02) corresponds to the monolingual English version, published in 2010-07.
This publication is to be read in conjunction with IEC 61918:2013.

IEC 61784-5-13:2013 specifies installation profiles for CPF 13 (Ethernet POWERLINK). Each CP installation profile is specified in a separate part of this series of standards. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems.
This publication is to be read in conjunction with  IEC 61918:2013.

IEC 61784-5-17:2013 specifies installation profiles for CPF 17 (RAPIEnet). Each CP installation profile is specified in a separate part of this series of standards. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems.
This publication is to be read in conjunction with  IEC 61918:2013.

IEC 61784-5-11:2013 specifies the installation profiles for CPF 11 (TCnet). Each CP installation profile is specified in a separate part of this standard. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems. This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. It includes the following changes: Addition of a new Annex C (normative).
This publication is to be read in conjunction with  IEC 61918:2013.

IEC 61784-5-8:2013 specifies installation profiles for CPF 8 (CC-Link). Each CP installation profile is specified in a separate part of this series of standards. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems.
This publication is to be read in conjunction with  IEC 61918:2013.

IEC 61784-5-14:2013 specifies the installation profiles for CPF 14 (EPA). Each CP installation profile is specified in a separate part of this standard. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems. This second edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. It includes the following changes:
- requirements for CP 14/3 have been added,
- recommendations for the applications about the linear/ring topology networks have been added,
- Table A.2 and Table A.6 have been updated.
This publication is to be read in conjunction with  IEC 61918:2013.

IEC 61784-5-16:2013 specifies installation profiles for CPF 16 (SERCOS). Each CP installation profile is specified in a separate part of this series of standards. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems.
This publication is to be read in conjunction with  IEC 61918:2013.

IEC 61784-5-1:2013 specifies installation profiles for CPF 1 (FOUNDATION Fieldbus). Each CP installation profile is specified in a separate part of this series of standards. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems.
This publication is to be read in conjunction with  IEC 61918:2013.

IEC 61784-5-2:2013 specifies the installation profiles for CPF 2 (CIPTM1). Each CP installation profile is specified in a separate annex of this standard. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems. This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. It includes the following changes:
- updates pertaining to current installation practices;
- addition of new technology that has become recently available;
- errors have been corrected;
- improved alignment with IEC 61918.
This publication is to be read in conjunction with  IEC 61918:2013.

IEC 61784-5-19:2013 specifies installation profiles for CPF 19 (MECHATROLINK). Each CP installation profile is specified in a separate part of this series of standards. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems.
This publication is to be read in conjunction with  IEC 61918:2013.

IEC 61918:2013 specifies basic requirements for the installation of media for communication networks in industrial premises and within and between the automation islands, of industrial sites. This standard covers balanced and optical fibre cabling. It also covers the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in the IEC 61784-5 series. This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. It includes the following changes:
- some terms and abbreviated terms have been added to Clause 3;
- Subclauses 4.4.3.4.1 and 4.4.7.3 have been updated;
- Subclause 8.1 has been updated;
- Figure 13, Figure 29, Figure H.1, Table 3, Table 6, Table 7 and Table B.5 have been updated;
- Annex D and Annex M have been extended to cover additional communication profile families;
- A new informative Annex O has been added.
This publication is to be read in conjunction with the IEC 61784-5 series and  ISO/IEC 14763-2:2012.

IEC 61918:2010 specifies basic requirements for the installation of media for communication networks in industrial premises and within and between the automation islands, of industrial sites. It covers balanced and optical fibre cabling and the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in the IEC 61784-5 series. It also covers:
- the installation of generic telecommunication cabling for industrial premises as specified in ISO/IEC 24702;
- the connection between the generic telecommunications cabling specified in ISO/IEC 24702
- and the specific communication cabling of an automation island, where an automation outlet (AO) replaces the telecommunication outlet (TO) of ISO/IEC 24702.
This second edition cancels and replaces the first edition published in 2007 and Corrigendum 1 (2009). It constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition:
- 4.4.7.2.1 is updated;
- 4.4.7.3.4 is updated;
- 5.7.4.3 is updated as result of the revision of the installation profiles;
- 6.2.3.1 is updated;
- Figure 2, Figure 15, Table 14 and Table B.3 are updated;
- a new Figure 35 is added;
- a new Table 10 is added;
- Annex D is extended to cover additional communication profile families;
- Annex F is extended to cover conductor sizes in electrical cables;
- Annex H is made normative;
- some common requirements are extended as result of the revision of the installation profiles. This bilingual version (2012-05) corresponds to the monolingual English version, published in 2010-07.
This publication is to be read in conjunction with the IEC 61784-5 series and ISO/IEC 14763-2:2012.

IEC 61784-5-2:2010 specifies the installation profiles for CPF 2 (CIPTM1). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2010. This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition:
- updates pertaining to current installation practices;
- addition of new technology that has become recently available;
- errors have been corrected;
- improved alignment with IEC 61918. This bilingual version (2012-02) corresponds to the monolingual English version, published in 2010-07.
This publication is to be read in conjunction with IEC 61918:2010.

IEC 61784-5-18:2018 specifies the installation profiles for CPF 18 (SafetyNETp).
This contribution contains a number of related files covering the communication profiles to be used with IEC 61918.
This installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements. The installation profiles are specified in Annex A. This annex is read in conjunction with IEC 61918. This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with IEC 61918;
b) addition of new connector (LC).