13.340.99 - Other protective equipment

This document specifies the requirements and test methods for temporary edge protection systems for
use during construction or maintenance of buildings and other structures.
This document applies to edge protection systems for flat and inclined surfaces and specifies the
requirements for three classes of temporary edge protection.
For edge protection systems with an arrest function (e.g. falling or sliding down a sloping roof) this
standard specifies requirements for energy absorption.
Thi...view more

This document specifies the requirements and test methods for temporary edge protection systems for use during construction or maintenance of buildings and other structures.
This document applies to edge protection systems for flat and inclined surfaces and specifies the requirements for three classes of temporary edge protection.
For edge protection systems with an arrest function (e.g. falling or sliding down a sloping roof) this standard specifies requirements for energy absorption.
This s...view more

This document applies to belts and lanyards intended for the purpose of work positioning or restraint. It specifies the requirements, testing, marking and information supplied by the manufacturer.
This document does not cover restraint lanyards with a fixed length which are not integrated into a belt.
NOTE   Restraint lanyards with a fixed length which are not integrated into a belt are covered in EN 354.

ISO 21924-3:2017 specifies additional requirements and test methods for trunk protectors used in unarmed martial arts such as taekwondo, karate, kick-boxing and similar disciplines. It also applies to breast protectors for men. For general requirements and test methods for protective equipment for martial arts, see ISO 21924‑1.

ISO 21924-6:2017 specifies additional requirements and test methods for breast protectors for females used in unarmed martial arts such as taekwondo, karate, kick-boxing and similar disciplines

ISO 21924-5:2017 specifies additional requirements and test methods for genital protectors and abdominal protectors used in unarmed martial arts such as taekwondo, karate, kick-boxing and similar disciplines.

This European Standard specifies safety requirements and test methods for avalanche airbag systems to reduce the risk of being buried by a snow avalanche.
This European Standard does not consider personal protection against impact or cold temperature.

This International Standard is applicable to disposable and reusable, as well as woven and non-woven
materials used as surgical drapes and other patient-protective covers which claim to be laser-resistant.
The purpose of this International Standard is to provide a standardized method for testing and
classifying surgical drapes and other patient-protective covers with respect to laser-induced hazards.
An appropriate classification system is given. It is not the purpose of this International S...view more

ISO 11810:2015 is applicable to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other patient-protective covers which claim to be laser-resistant. The purpose of this International Standard is to provide a standardized method for testing and classifying surgical drapes and other patient-protective covers with respect to laser-induced hazards. An appropriate classification system is given. It is not the purpose of this International Standard to serve ...view more

ISO 11810:2015 is applicable to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other patient-protective covers which claim to be laser-resistant. The purpose of this International Standard is to provide a standardized method for testing and classifying surgical drapes and other patient-protective covers with respect to laser-induced hazards. An appropriate classification system is given. It is not the purpose of this International Standard to serve ...view more

This European Standard applies to safety nets and their accessories for use in construction and assembly work to protect from deeper fall. It specifies safety requirements and test methods and is based on the performance characteristics of polypropene and polyamide fibres. Materials used in nets should have no significant reduction in mechanical properties between –10 °C and +40 °C.
This European Standard is not applicable to the installation of safety nets. For a European Standard covering the...view more

This European Standard specifies safety requirements for the positioning of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of system S, system T, system U and system V safety nets in accordance with EN 1263 1.
Small safety nets of system S according to EN 1263 1 (less than 35 m2 and 5,0 m on the shortest side) are not dealt with in this European Standard.

This Standard specifies safety requirements for transparent welding curtains, strips and screens to be used for shielding of work places from their surroundings where arc welding processes are used. They are designed to protect people who are not involved in the welding process from hazardous radiant emissions from welding arcs and spatter. Welding curtains, strips and screens specified in this standard are not intended to replace welding filters. For intentional viewing of welding arcs other me...view more

ISO 25980:2014 specifies safety requirements for transparent welding curtains, strips, and screens to be used for shielding of work places from their surroundings where arc welding processes are used. They are designed to protect people who are not involved in the welding process from hazardous radiant emissions from welding arcs and spatter.
Welding curtains, strips, and screens it specifies are not intended to replace welding filters. For intentional viewing of welding arcs other means of pro...view more

This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which are intended to be removable from the structure. These anchor devices incorporate stationary or travelling (mobile) anchor points designed for the attachment of components of a personal fall protection system in accordance with EN 363.
This European Standard also gives requirements for marking and instructions for use, and guidance on installation.
This European Stand...view more

This European Standard specifies requirements, test methods, marking and information to be supplied by the manufacturer for descender devices, which include descent lines (hereinafter referred to as lines), intended for rescue and to protect against falls in a rescue system, which is a personal fall protection system. This European Standard does not specify requirements for descender devices that are used for descending in mountaineering, rope access or work positioning systems.
NOTE   A descende...view more

ISO 12401:2009 specifies the requirements for performance, sizing, marking and test methods for deck safety harnesses and safety lines on recreational craft.
It is applicable to harnesses and lines in the following sizes of body mass (multisizing is permitted):
size 1: > 50 kg ;
size 2: > 20 kg ≤ 50 kg;
size 3: ≤ 20 kg;
which are intended to be worn by all persons when in the exposed cockpit or on the working deck of a craft afloat.
It is not applicable to dinghy 'trapeze' harnesses, wi...view more

TC - Modification to 4.6

This European Standard applies to rope adjustment devices intended for use in rope access systems. It specifies the requirements, test methods, marking and information supplied by the manufacturer. Rope adjustment devices conforming to this European Standard may be designed for the use of one person, or in case of rescue, for two persons simultaneously. The rope adjustment devices as specified are not suitable for use in a fall arrest system.

This European Standard specifies the requirements, test methods, marking and information supplied by the manufacturer for connectors. Connectors conforming to this European Standard are used as connecting elements in personal fall protection systems, i.e. fall arrest, work positioning, rope access, restraint and rescue systems.