Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2014)

This Standard specifies safety requirements for transparent welding curtains, strips and screens to be used for shielding of work places from their surroundings where arc welding processes are used. They are designed to protect people who are not involved in the welding process from hazardous radiant emissions from welding arcs and spatter. Welding curtains, strips and screens specified in this standard are not intended to replace welding filters. For intentional viewing of welding arcs other means of protection shall be used. The present standard is not applicable for welding processes where laser radiation is used.

Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren - Durchsichtige Schweißvorhänge, -streifen und -abschirmungen für Lichtbogenschweißprozesse (ISO 25980:2014)

Diese internationale Norm legt sicherheitstechnische Anforderungen für durchsichtige Schweißvorhänge, -streifen und -abschirmungen fest, die zur Abgrenzung von Arbeitsplätzen gegen Umgebungen verwendet werden, an denen Lichtbogenschweißprozesse durchgeführt werden. Sie sind so ausgelegt, dass sie am Schweißprozess unbeteiligte Personen vor gefährlicher Strahlung, vor Schweißlichtbögen und vor Spritzern schützen.
Schweißvorhänge, -streifen und -abschirmungen, die in dieser internationalen Norm festgelegt sind, sind kein Ersatz für Schweißerschutzfilter. Für eine direkte Beobachtung von Schweißlichtbögen sind andere Schutzeinrichtungen einzusetzen.
Die vorliegende internationale Norm gilt nicht für Schweißprozesse, bei denen Laserstrahlung eingesetzt wird.
ANMERKUNG Aus Gründen eines besseren Komforts sollten dunkle Vorhänge oder Abschirmungen für die beidseitige Trennung von angrenzenden Arbeitsplätzen verwendet werden.

Hygiène et sécurité en soudage et techniques connexes - Rideaux, lanières et écrans transparents pour les procédés de soudage à l'arc (ISO 25980:2014)

l'ISO 25980 :2014 spécifie les prescriptions de sécurité relatives aux rideaux, lanières et écrans transparents utilisés pour la protection des lieux de travail situés à proximité de zones où sont appliqués des procédés de soudage à l'arc. Ils sont conçus contre le danger des rayonnements émis par l'arc et des projections pour protéger les personnes qui ne sont pas impliquées dans le processus de soudage.
Les rideaux, lanières et écrans de soudage spécifiés dans la présente norme ne sont pas destinés à remplacer les filtres de soudage. Pour observer la soudure à l'arc, d'autres moyens de protection sont utilisés.
La présente Norme internationale ne s'applique pas aux procédés de soudage qui utilisent les rayons laser.
NOTE     Pour des raisons de confort, il est désirable d'utiliser des rideaux ou des écrans de soudage plus sombres pour séparer des lieux de travail adjacents.

Varnost in zdravje pri varjenju in sorodnih postopkih - Prosojne zavese, trakovi in zasloni pri obločnih postopkih (ISO 25980:2014)

Ta standard določa varnostne zahteve za prosojne zavese, trakove in zaslone za zaščito delovnih mest pri postopkih obločnega varjenja. Namenjeni so za zaščito ljudi, ki niso udeleženi pri postopku varjenja, pred nevarnimi emisijami sevanja iz varilnih oblokov in majhnimi delci. Zavese, trakovi in zasloni, opisani v tem standardu, niso namenjeni kot zamenjava za filtre za varjenje. Za namerno gledanje varilnih oblokov je treba uporabiti druge načine zaščite. Ta standard se ne uporablja pri postopkih varjenja z uporabo laserskega sevanja.

General Information

Status
Withdrawn
Publication Date
07-Dec-2014
Withdrawal Date
05-Jun-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jun-2023
Due Date
24-Jun-2023
Completion Date
06-Jun-2023

Relations

Buy Standard

Standard
EN ISO 25980:2015
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 25980:2015
01-januar-2015
1DGRPHãþD
SIST EN 1598:2011
9DUQRVWLQ]GUDYMHSULYDUMHQMXLQVRURGQLKSRVWRSNLK3URVRMQH]DYHVHWUDNRYLLQ
]DVORQLSULREORþQLKSRVWRSNLK ,62
Health and safety in welding and allied processes - Transparent welding curtains, strips
and screens for arc welding processes (ISO 25980:2014)
Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren -
Durchsichtige Schweißvorhänge, -streifen und -abschirmungen für
Lichtbogenschweißprozesse (ISO 25980:2014)
Hygiène et sécurité en soudage et techniques connexes - Rideaux, lanières et écrans
transparents pour les procédés de soudage à l'arc (ISO 25980:2014)
Ta slovenski standard je istoveten z: EN ISO 25980:2014
ICS:
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
13.340.99 Druga varovalna oprema Other protective equipment
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
SIST EN ISO 25980:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 25980:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 25980:2015

EUROPEAN STANDARD
EN ISO 25980

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2014
ICS 13.100; 25.160.10 Supersedes EN 1598:2011
English Version
Health and safety in welding and allied processes - Transparent
welding curtains, strips and screens for arc welding processes
(ISO 25980:2014)
Hygiène et sécurité en soudage et techniques connexes - Arbeits- und Gesundheitsschutz beim Schweißen und bei
Rideaux, lanières et écrans transparents pour les procédés verwandten Verfahren - Durchsichtige Schweißvorhänge, -
de soudage à l'arc (ISO 25980:2014) streifen und -abschirmungen für
Lichtbogenschweißprozesse (ISO 25980:2014)
This European Standard was approved by CEN on 23 August 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25980:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 25980:2015
EN ISO 25980:2014 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 25980:2015
EN ISO 25980:2014 (E)
Foreword
This document (EN ISO 25980:2014) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2015, and conflicting national standards shall be withdrawn at the
latest by April 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1598:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 25980:2014 has been approved by CEN as EN ISO 25980:2014 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 25980:2015

---------------------- Page: 6 ----------------------

SIST EN ISO 25980:2015
INTERNATIONAL ISO
STANDARD 25980
First edition
2014-10-01
Health and safety in welding and
allied processes — Transparent
welding curtains, strips and screens
for arc welding processes
Hygiène et sécurité en soudage et techniques connexes — Rideaux,
lanières et écrans transparents pour les procédés de soudage à l’arc
Reference number
ISO 25980:2014(E)
©
ISO 2014

---------------------- Page: 7 ----------------------

SIST EN ISO 25980:2015
ISO 25980:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 25980:2015
ISO 25980:2014(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 1
4.1 General . 1
4.2 Transmittance . 2
4.3 Reflectance . 3
4.4 UV-Stability . 3
4.5 Resistance to ignition . 3
4.6 Eyelet strength . 5
5 Marking . 6
6 Information for users . 7
Bibliography . 8
© ISO 2014 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 25980:2015
ISO 25980:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee
SC 9, Health and safety.
iv © ISO 2014 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 25980:2015
INTERNATIONAL STANDARD ISO 25980:2014(E)
Health and safety in welding and allied processes —
Transparent welding curtains, strips and screens for arc
welding processes
1 Scope
This International Standard specifies safety requirements for tra
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.