EN 1263-2:2014
(Main)Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits
Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits
This European Standard specifies safety requirements for the positioning of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of system S, system T, system U and system V safety nets in accordance with EN 1263 1.
Small safety nets of system S according to EN 1263 1 (less than 35 m2 and 5,0 m on the shortest side) are not dealt with in this European Standard.
Temporäre Konstruktionen für Bauwerke - Schutznetze (Sicherheitsnetze) - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen
Diese Europäische Norm legt sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen in Übereinstimmung mit der Gebrauchsanleitung des Herstellers und mit den Produktfestlegungen und Prüfver-fahren der Schutznetz-Systeme S, T, U und V nach EN 1263-1 fest.
Kleine Schutznetze System S nach EN 1263-1 (kleiner als 35 m2 und 5,0 m auf der kürzesten Seite) sind nicht Gegenstand dieser Europäischen Norm.
Équipement temporaires de chantiers - Filets de sécurité - Partie 2 : Exigences de sécurité concernant les limites de montage
Začasne konstrukcije za gradnjo - Varovalne mreže - 2. del: Varnostne zahteve za nameščanje varovalnih mrež
Ta evropski standard določa varnostne zahteve za nameščanje varovalnih mrež v skladu z navodili za uporabo proizvajalca in specifikacijami proizvodov ter za preskušanje varovalnih mrež sistema T, sistema U in sistema V v skladu s standardom EN 1263-1.
Majhne varovalne mreže sistema S v skladu s standardom EN 1263-1 (manj kot 35 m2 in 5,0 m na najkrajši strani) niso zajete v tem evropskem standardu.
General Information
Relations
Overview
EN 1263-2:2014 is a CEN European Standard that sets safety requirements for the positioning limits of safety nets used as temporary works equipment on construction sites. It complements EN 1263-1 (which covers product safety requirements and test methods) by specifying how system S, T, U and V safety nets must be positioned, linked and anchored to ensure effective fall protection. Small system S nets below 35 m² or with the shortest side under 5.0 m are excluded from this part and are subject to national rules.
Key Topics
- Instruction manual requirements: Each consignment must include user instructions (in the user’s language) with minimum information on required anchorage forces, maximum fall height, minimum catching width, linkage methods, minimum distance below the net, storage, inspection and replacement.
- Fall height limits: Maximum permissible fall height into a safety net is 6.0 m from the working level (nominal fall height from the person’s centre of gravity may be up to 7.0 m). Within 2 m of the net border the reduced fall height Hr must not exceed 3.0 m.
- Catching width (horizontal projection): Minimum catching widths depend on fall height:
- He ≤ 1.0 m → b ≥ 2.0 m
- He ≤ 3.0 m → b ≥ 2.5 m
- He ≤ 6.0 m → b ≥ 3.0 m
For working areas inclined over 20°, b ≥ 3.0 m and the vertical separation t ≤ 3.0 m.
- System-specific positioning and linkage:
- System S: minimum net size 35 m² (shortest side ≥ 5.0 m); anchorage spacing < 2.5 m; design anchorage force P ≥ 6 kN at 45°; overlap min 2.0 m when used.
- System T: linkage overlap min 0.75 m; support frames must be positioned so falling persons don’t impact the frame.
- System U: positioning limits referenced to EN 13374.
- System V: upper edge located ≥ 1.0 m above working level; overlapping not permitted; top support spacing ≤ 5.0 m; lower edge anchor spacing ≤ 0.50 m; anchorage ≥ 0.1 m from building edge.
- Deformation limits: Maximum net deformation under test conditions is defined (applies when f0 ≤ 0.1·l and Hi = h + f0 ≤ 6.0 m).
Applications
EN 1263-2 is used by:
- Contractors and site safety managers to plan net placement and fall-protection layouts.
- Temporary works designers and structural engineers to size anchorage and support frameworks.
- Safety-net manufacturers to provide compliant instruction manuals and product specifications.
- Test laboratories and certifying bodies verifying net installations and performance.
- Regulators and auditors assessing on-site compliance with European positioning limits.
Related Standards
- EN 1263-1:2014 - Safety nets: product requirements and test methods (normative reference).
- EN 13374 - Temporary edge protection systems (referenced for system U positioning).
Keywords: EN 1263-2, safety nets, temporary works equipment, positioning limits, fall height, catching width, anchorage, system S T U V, construction site safety.
Frequently Asked Questions
EN 1263-2:2014 is a standard published by the European Committee for Standardization (CEN). Its full title is "Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits". This standard covers: This European Standard specifies safety requirements for the positioning of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of system S, system T, system U and system V safety nets in accordance with EN 1263 1. Small safety nets of system S according to EN 1263 1 (less than 35 m2 and 5,0 m on the shortest side) are not dealt with in this European Standard.
This European Standard specifies safety requirements for the positioning of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of system S, system T, system U and system V safety nets in accordance with EN 1263 1. Small safety nets of system S according to EN 1263 1 (less than 35 m2 and 5,0 m on the shortest side) are not dealt with in this European Standard.
EN 1263-2:2014 is classified under the following ICS (International Classification for Standards) categories: 13.340.60 - Protection against falling and slipping; 13.340.99 - Other protective equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1263-2:2014 has the following relationships with other standards: It is inter standard links to EN 1263-2:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 1263-2:2014 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Temporäre Konstruktionen für Bauwerke - Schutznetze (Sicherheitsnetze) - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von SchutznetzenÉquipement temporaires de chantiers - Filets de sécurité - Partie 2 : Exigences de sécurité concernant les limites de montageTemporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits91.220Gradbena opremaConstruction equipment13.340.60Protection against falling and slippingICS:Ta slovenski standard je istoveten z:EN 1263-2:2014SIST EN 1263-2:2015en,fr,de01-marec-2015SIST EN 1263-2:2015SLOVENSKI
STANDARDSIST EN 1263-2:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1263-2
December 2014 ICS 13.340.60 Supersedes EN 1263-2:2002English Version
Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits
Équipement temporaires de chantiers - Filets de sécurité - Partie 2 : Exigences de sécurité concernant les limites de montage
Temporäre Konstruktionen für Bauwerke - Schutznetze (Sicherheitsnetze) - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen This European Standard was approved by CEN on 8 November 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1263-2:2014 ESIST EN 1263-2:2015
A-deviations . 12 Bibliography . 13
...
기사 제목: EN 1263-2:2014 - 일시적 공사 장비 - 안전망 - 제2부: 위치 제한에 대한 안전 요구사항 기사 내용: 이 유럽 표준은 제조업자의 사용 설명서 및 제품 사양에 따라 안전망의 위치 지정에 대한 안전 요구사항을 명시하며, EN 1263 1에 따라 시스템 S, 시스템 T, 시스템 U 및 시스템 V의 안전망을 시험하는 것도 포함합니다. EN 1263 1에 따라 시스템 S의 작은 안전망 (면적 35m² 미만 및 가장 짧은 변이 5.0m)은 이 유럽 표준에서 다루지 않습니다.
記事のタイトル：EN 1263-2:2014 - 一時的な作業用具 - セーフティネット - 第2部：位置制限の安全要件 記事の内容：この欧州規格は、製造業者の取扱説明書と製品仕様に従って、セーフティネットの位置指定の安全要件を定めます。また、EN 1263 1に基づいて、システムS、システムT、システムU、およびシステムVのセーフティネットの試験も含まれています。 ただし、EN 1263 1に基づいて定義される小さなシステムSのセーフティネット（面積35m²未満、最も短い側が5.0m以下）は、この規格では対象外とされています。
The article discusses EN 1263-2:2014, a European Standard that provides safety requirements for the positioning of safety nets. It specifically applies to system S, system T, system U, and system V safety nets, in accordance with the manufacturer's instructions and product specifications. However, small safety nets of system S, which are less than 35 m² and 5.0 m on the shortest side, are not covered in this standard.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...