ASTM F2014-00(2019)
(Specification)Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ABSTRACT
This specification covers the pipe materials and dimensions for producing non-reinforced extruded tee connections manufactured by mechanical forming processes. The term “extruded tee connection” applies to butt-weld or socket-weld connections. The non-reinforced extruded pipe tee connection is an alternative to the tee fittings, nozzle, and other welded connections. The non-reinforced extruded pipe tee connection has been widely used for systems in the marine, process piping, food, pharmaceutical, and similar industries. Different materials that have acceptable forming qualities to produce extruded tee connections shall consist of copper, copper-nickel alloy, titanium, steel, and stainless steel. The extruded tee connection shall be free from burrs and cracks, which would affect the suitability for the intended service.
SCOPE
1.1 This specification covers the pipe materials and dimensions for producing non-reinforced extruded tee connections manufactured by mechanical forming processes. The term “extruded tee connection” applies to butt-weld or socket-weld connections. This specification refers to the forming process that leads to welding or brazing.
1.2 The non-reinforced extruded pipe tee connection is an alternative to the tee fittings, nozzle, and other welded connections.
1.3 The non-reinforced extruded pipe tee connection has been widely used for systems in the marine, process piping, food, pharmaceutical, and similar industries.
1.4 The extruded tee connection will be welded in accordance with Specification F722. Brazing of tee connections will be in accordance with ASME B31.5.
1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:F2014 −00 (Reapproved 2019) An American National Standard
Standard Specification for
Non-Reinforced Extruded Tee Connections for Piping
Applications
This standard is issued under the fixed designation F2014; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope A106/A106M Specification for Seamless Carbon Steel Pipe
for High-Temperature Service
1.1 This specification covers the pipe materials and dimen-
A135 Specification for Electric-Resistance-Welded Steel
sions for producing non-reinforced extruded tee connections
Pipe
manufactured by mechanical forming processes. The term
A139/A139M Specification for Electric-Fusion (Arc)-
“extruded tee connection” applies to butt-weld or socket-weld
Welded Steel Pipe (NPS 4 and Over)
connections. This specification refers to the forming process
A161 Specification for Seamless Low-Carbon and Carbon-
that leads to welding or brazing.
Molybdenum Steel Still Tubes for Refinery (Withdrawn
1.2 The non-reinforced extruded pipe tee connection is an 3
1999)
alternative to the tee fittings, nozzle, and other welded connec-
A178/A178M Specification for Electric-Resistance-Welded
tions.
Carbon Steel and Carbon-Manganese Steel Boiler and
Superheater Tubes
1.3 The non-reinforced extruded pipe tee connection has
been widely used for systems in the marine, process piping, A199/A199M Specification for Seamless Cold-Drawn Inter-
mediate Alloy-Steel Heat-Exchanger and Condenser
food, pharmaceutical, and similar industries.
Tubes (Withdrawn 1995)
1.4 The extruded tee connection will be welded in accor-
A200 Specification for Seamless Intermediate Alloy-Steel
dance with Specification F722. Brazing of tee connections will
Still Tubes for Refinery Service (Withdrawn 1999)
be in accordance with ASME B31.5.
A209/A209M Specification for Seamless Carbon-
1.5 The values stated in SI units are to be regarded as
Molybdenum Alloy-Steel Boiler and Superheater Tubes
standard. The values given in parentheses are mathematical
A210/A210M Specification for Seamless Medium-Carbon
conversions to inch-pound units that are provided for informa-
Steel Boiler and Superheater Tubes
tion only and are not considered standard.
A250/A250M Specification for Electric-Resistance-Welded
1.6 This international standard was developed in accor- Ferritic Alloy-Steel Boiler and Superheater Tubes (With-
dance with internationally recognized principles on standard- drawn 2017)
ization established in the Decision on Principles for the A252 Specification for Welded and Seamless Steel Pipe
Development of International Standards, Guides and Recom- Piles
mendations issued by the World Trade Organization Technical A312/A312M Specification for Seamless, Welded, and
Barriers to Trade (TBT) Committee. Heavily Cold Worked Austenitic Stainless Steel Pipes
A333/A333M Specification for Seamless and Welded Steel
2. Referenced Documents
PipeforLow-TemperatureServiceandOtherApplications
with Required Notch Toughness
2.1 ASTM Standards:
A334/A334M Specification for Seamless and Welded Car-
A53/A53M Specification for Pipe, Steel, Black and Hot-
bon and Alloy-Steel Tubes for Low-Temperature Service
Dipped, Zinc-Coated, Welded and Seamless
A500 Specification for Cold-Formed Welded and Seamless
Carbon Steel Structural Tubing in Rounds and Shapes
This specification is under the jurisdiction of ASTM Committee F25 on Ships
A512 Specification for Cold-Drawn Buttweld Carbon Steel
and Marine Technology and is the direct responsibility of Subcommittee F25.11 on
Mechanical Tubing
Machinery and Piping Systems.
A519 Specification for Seamless Carbon and Alloy Steel
Current edition approved May 1, 2019. Published June 2019. Originally
Mechanical Tubing
approved in 2000. Last previous edition approved in 2013 as F2014 – 00 (2013).
DOI: 10.1520/F2014-00R19.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on The last approved version of this historical standard is referenced on
the ASTM website. www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
F2014−00 (2019)
A587 Specification for Electric-Resistance-Welded Low- connection, mechanically formed tee connection, and also
Carbon Steel Pipe for the Chemical Industry extruded outlet.
A589 Specification for Seamless and Welded Carbon Steel
3.1.2 tee ratio, n—the ratio of the formed tee connection
Water-Well Pipe
diameter, divided by the run pipe diameter as follows:
A672 Specification for Electric-Fusion-Welded Steel Pipe
Dt
for High-Pressure Service at Moderate Temperatures
5 tee ratio (1)
Dr
B88 Specification for Seamless Copper Water Tube
B88M Specification for General Requirements for Chemical
4. Dimensions and Tolerances
Check Analysis Limits for Nickel, Nickel Alloys and
4.1 For welded connections, the dimensions and tolerances
Cobalt Alloys B0881
of the extruded tee connection shall be within the tolerances of
B280 Specification for Seamless Copper Tube for Air Con-
the mating pipe in accordance with Specification F722,as
ditioning and Refrigeration Field Service
applicable to ASME B31.1 and B31.3.
B337 Specification for Seamless and Welded Titanium and
Titanium Alloy Pipe (Withdrawn 1997) 4.2 For braze connections, the dimensions and tolerances of
B338 Specification for Seamless and Welded Titanium and theextrudedteeconnectionshallbewithinthetolerancesofthe
Titanium Alloy Tubes for Condensers and Heat Exchang-
mating pipe in accordance with Specification F722, as appli-
ers cable to ASME B31.5.
B466/B466M Specification for Seamless Copper-Nickel
5. Run Pipe Materials and Limitations
Pipe and Tube
B467 Specification for Welded Copper-Nickel Pipe
5.1 Table 1 contains a list of materials that have been found
F722 Specification for Welded Joints for Shipboard Piping
Systems
4 TABLE 1 Materials That Have Acceptable Forming Qualities To
2.2 ASME Standards:
Produce Extruded Tee Connections
B31.1 Power Piping
Material ASTM Material Specifications
B31.3 Process Piping
Copper B88, B88M
B31.5 Refrigeration Piping and Heat Transfer Components
B280
B36.10M Welded and Seamless Wrought Steel Pipe
Copper nickel B466/B466M
B467
2.3 ISO Standard:
ISO-4200 Plain End Steel Tubes, Welded and Seamless— A
Titanium B337 Grades 1 and 2
General Table 5 of Dimensions and Masses Per Unit B338 Grades 1 and 2
B,C
Steel A53/A53M
Length
A135
A161 low carbon
3. Terminology
A199/A199M Grade T11
A209/A209M
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.