ASTM A1016/A1016M-14e1
(Specification)Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
ABSTRACT
This specification covers general requirements for ferritic alloy steel, austenitic alloy steel, and stainless steel tubes. The steel shall made by any process. The material shall conform to the tensile property requirements prescribed in the individual product specification. Yield strength tests and elongation tests shall be made to conform to the requirements. Flattening test, reverse flattening test, reverse bend test, flaring test, flange test, hardness test, ultrasonic test, eddy current test, flux leakage test, and hydrostatic test shall be made to conform to the requirements specified.
SCOPE
1.1 This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.
Title of Specification
ASTM
DesignationA
Seamless Carbon-Molybdenum Alloy-Steel Boiler and
Superheater Tubes
A209/A209M
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater,
and Heat-Exchanger Tubes
A213/A213M
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger,
and Condenser Tubes
A249/A249M
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and
Superheater Tubes
A250/A250M
Seamless and Welded Ferritic and Martensitic Stainless Steel
Tubing for General Service
A268/A268M
Seamless and Welded Austenitic Stainless Steel Tubing for
General Service
A269
Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A270
Seamless and Welded Carbon and Alloy-Steel Tubes for
Low-Temperature Service
A334/A334M
Welded Austenitic Stainless Steel Feedwater Heater Tubes
A688/A688M
Austenitic Stainless Steel Tubing for Breeder Reactor Core
Components
A771/A771M
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing
for General Service
A789/A789M
Welded Ferritic Stainless Steel Feedwater Heater Tubes
A803/A803M
Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder
Reactor Core Components
A826/A826M
High-Frequency Induction Welded, Unannealed Austenitic Steel
Condenser Tubes
A851(A) These designations refer to the latest issue of the respective specifications.
1.2 In the case of conflict between a requirement of a product specification and a requirement of this general requirements specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order shall prevail.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation (SI) of the product specification is specified in the order.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
´1
Designation:A1016/A1016M −14
Standard Specification for
General Requirements for Ferritic Alloy Steel, Austenitic
1
Alloy Steel, and Stainless Steel Tubes
This standard is issued under the fixed designation A1016/A1016M; the number immediately following the designation indicates the
year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last
reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Editorially corrected 2.1 and 25.2.5 in February 2017.
1. Scope* 1.3 The values stated in either SI units or inch-pound units
are to be regarded separately as standard. Within the text, the
1.1 This specification covers a group of requirements that,
SI units are shown in brackets. The values stated in each
unless otherwise specified in an individual specification, shall
system may not be exact equivalents; therefore, each system
apply to the ASTM product specifications noted below.
shall be used independently of the other. Combining values
Title of Specification ASTM
from the two systems may result in non-conformance with the
A
Designation
standard. The inch-pound units shall apply unless the “M”
Seamless Carbon-Molybdenum Alloy-Steel Boiler and A209/A209M
designation (SI) of the product specification is specified in the
Superheater Tubes
order.
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, A213/A213M
and Heat-Exchanger Tubes
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, A249/A249M
2. Referenced Documents
and Condenser Tubes
2
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and A250/A250M
2.1 ASTM Standards:
Superheater Tubes
A209/A209M Specification for Seamless Carbon-
Seamless and Welded Ferritic and Martensitic Stainless Steel A268/A268M
Tubing for General Service Molybdenum Alloy-Steel Boiler and Superheater Tubes
Seamless and Welded Austenitic Stainless Steel Tubing for A269
A213/A213M Specification for Seamless Ferritic and Aus-
General Service
tenitic Alloy-Steel Boiler, Superheater, and Heat-
Seamless and Welded Austenitic Stainless Steel Sanitary TubingA270
Seamless and Welded Carbon and Alloy-Steel Tubes for A334/A334M
Exchanger Tubes
Low-Temperature Service
A249/A249M Specification for Welded Austenitic Steel
Welded Austenitic Stainless Steel Feedwater Heater Tubes A688/A688M
Boiler, Superheater, Heat-Exchanger, and Condenser
Austenitic Stainless Steel Tubing for Breeder Reactor Core A771/A771M
Components
Tubes
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing A789/A789M
A250/A250M Specification for Electric-Resistance-Welded
for General Service
Ferritic Alloy-Steel Boiler and Superheater Tubes
Welded Ferritic Stainless Steel Feedwater Heater Tubes A803/A803M
Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder A826/A826M
A268/A268M Specification for Seamless and Welded Fer-
Reactor Core Components
ritic and Martensitic Stainless Steel Tubing for General
High-Frequency Induction Welded, Unannealed Austenitic Steel A851
Service
Condenser Tubes
A269 Specification for Seamless and Welded Austenitic
A
These designations refer to the latest issue of the respective specifications.
Stainless Steel Tubing for General Service
A270 Specification for Seamless and WeldedAustenitic and
1.2 In the case of conflict between a requirement of a
Ferritic/Austenitic Stainless Steel Sanitary Tubing
product specification and a requirement of this general require-
A334/A334M Specification for Seamless and Welded Car-
ments specification, the product specification shall prevail. In
bon and Alloy-Steel Tubes for Low-Temperature Service
the case of conflict between a requirement of the product
A370 Test Methods and Definitions for Mechanical Testing
specification or a requirement of this general requirements
of Steel Products
specification and a more stringent requirement of the purchase
A530/A530M Specification for General Requirements for
order, the purchase order shall prevail.
Specialized Carbon and Alloy Steel Pipe
1
This specification is under the jurisdiction ofASTM Committee A01 on Steel,
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee
2
A01.10 on Stainless and Alloy Steel Tubular Products. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved March 1, 2014. Published March 2014. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 2001. Last previous edition approved in 2013 as A1016/A1016M–13. Standards volume information, refer to the standard’s Document Summary page on
DOI: 10.1520/A1016_A1016M-14E01. the ASTM website.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohock
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
´1
Designation: A1016/A1016M − 14 A1016/A1016M − 14
Standard Specification for
General Requirements for Ferritic Alloy Steel, Austenitic
1
Alloy Steel, and Stainless Steel Tubes
This standard is issued under the fixed designation A1016/A1016M; the number immediately following the designation indicates the
year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last
reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Editorially corrected 2.1 and 25.2.5 in February 2017.
1. Scope*
1.1 This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply
to the ASTM product specifications noted below.
Title of Specification ASTM
A
Designation
Seamless Carbon-Molybdenum Alloy-Steel Boiler and A209/A209M
Superheater Tubes
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, A213/A213M
and Heat-Exchanger Tubes
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, A249/A249M
and Condenser Tubes
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and A250/A250M
Superheater Tubes
Seamless and Welded Ferritic and Martensitic Stainless Steel A268/A268M
Tubing for General Service
Seamless and Welded Austenitic Stainless Steel Tubing for A269
General Service
Seamless and Welded Austenitic Stainless Steel Sanitary Tubing A270
Seamless and Welded Carbon and Alloy-Steel Tubes for A334/A334M
Low-Temperature Service
Welded Austenitic Stainless Steel Feedwater Heater Tubes A668/A668M
Welded Austenitic Stainless Steel Feedwater Heater Tubes A688/A688M
Austenitic Stainless Steel Tubing for Breeder Reactor Core A771/A771M
Components
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing A789/A789M
for General Service
Welded Ferritic Stainless Steel Feedwater Heater Tubes A803/A803M
Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder A826/A826M
Reactor Core Components
High-Frequency Induction Welded, Unannealed Austenitic Steel A851
Condenser Tubes
A
These designations refer to the latest issue of the respective specifications.
1.2 In the case of conflict between a requirement of a product specification and a requirement of this general requirements
specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or
a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order
shall prevail.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units
are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used
independently of the other. Combining values from the two systems may result in non-conformance with the standard. The
inch-pound units shall apply unless the “M” designation (SI) of the product specification is specified in the order.
1
This specification is under the jurisdiction of ASTM Committee A01 on Steel, Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee A01.10
on Stainless and Alloy Steel Tubular Products.
Current edition approved March 1, 2014. Published March 2014. Originally approved in 2001. Last previous edition approved in 2013 as A1016/A1016M–13. DOI:
10.1520/A1016_A1016M-14.10.1520/A1016_A1016M-14E01.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
´1
A1016/A1016M − 14
2. Referenced Documents
2
2.1 ASTM Standards:
A209/A209M Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A213/A213M Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A249/A249M Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A250/A250M Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A268/A268M Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A269 Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270 Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
A334/A334M Specificat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.