iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D4670-17(2022)e1

(Test Method)

Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols

Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols

SIGNIFICANCE AND USE
4.1 This test method is suitable as a quality control or specification test.
SCOPE
1.1 This test method covers a procedure for visual inspection to determine the presence of insoluble foreign material in polyols.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: There is no known ISO equivalent to this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Published
Publication Date
30-Jun-2022
ICS
83.040.30 - Auxiliary materials and additives for plastics
83.080.20 - Thermoplastic materials
Technical Committee
D20 - Plastics
Drafting Committee
D20.22 - Cellular Materials - Plastics and Elastomers
Current Stage
Ref Project

Relations

Refers
ASTM D883-24 - Standard Terminology Relating to Plastics
Effective Date
01-Feb-2024
Refers
ASTM D883-23 - Standard Terminology Relating to Plastics
Effective Date
01-Nov-2023
Refers
ASTM D883-20 - Standard Terminology Relating to Plastics
Effective Date
01-Jan-2020
Refers
ASTM D883-19c - Standard Terminology Relating to Plastics
Effective Date
01-Aug-2019
Refers
ASTM D883-19a - Standard Terminology Relating to Plastics
Effective Date
15-Apr-2019
Refers
ASTM D883-19 - Standard Terminology Relating to Plastics
Effective Date
01-Feb-2019
Refers
ASTM D883-18a - Standard Terminology Relating to Plastics
Effective Date
01-Dec-2018
Refers
ASTM D883-18 - Standard Terminology Relating to Plastics
Effective Date
01-Nov-2018
Refers
ASTM D883-17 - Standard Terminology Relating to Plastics
Effective Date
15-Aug-2017
Refers
ASTM D883-12e1 - Standard Terminology Relating to Plastics
Effective Date
15-Nov-2012
Refers
ASTM D883-11 - Standard Terminology Relating to Plastics
Effective Date
15-May-2011
Refers
ASTM D883-08 - Standard Terminology Relating to Plastics
Effective Date
01-Mar-2008
Refers
ASTM D883-07 - Standard Terminology Relating to Plastics
Effective Date
01-May-2007
Refers
ASTM D883-00 - Standard Terminology Relating to Plastics
Effective Date
10-Aug-2000

Buy Standard

ASTM D4670-17(2022)e1 - Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in PolyolsASTM D4670-17(2022)e1 - Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols
PreviousNext
Standard
ASTM D4670-17(2022)e1 - Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
´1
Designation: D4670 − 17 (Reapproved 2022)
Standard Test Method for
Polyurethane Raw Materials: Determination of Suspended
Matter in Polyols
This standard is issued under the fixed designation D4670; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
ε NOTE—Reapproved with editorial changes in July 2022.
1. Scope 3. Terminology
1.1 This test method covers a procedure for visual inspec-
3.1 Terminology in this test method is in accordance with
tion to determine the presence of insoluble foreign material in
Terminology D883.
polyols.
1.2 This standard does not purport to address all of the
4. Significance and Use
safety concerns, if any, associated with its use. It is the
4.1 This test method is suitable as a quality control or
responsibility of the user of this standard to establish appro-
specification test.
priate safety, health, and environmental practices and deter-
mine the applicability of regulatory limitations prior to use.
5. Procedure
NOTE 1—There is no known ISO equivalent to this standard.
5.1 Invert a colorless, transparent glass bottle containing the
1.3 This international standard was developed in accor-
well-mixed sample and examine by transmitted light for the
dance with internationally recognized principles on standard-
presence of suspended matter.
ization established in the Decision on Principles for the
Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical 6. Report
Barriers to Trade (TBT) Committee.
6.1 Report the presence or absence of suspended matter.
2. Referenced Documents
7. Precision and Bias
2.1 ASTM Standards:
D883 Terminology Relating to Plastics
7.1 No statement is made about the precision or the bias
since this test method merely states whether suspended matter
This test method is under the jurisdiction ofASTM Committee D20 on Plastics
is detected or not.
a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D4669-24(Test Method)
Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

SIGNIFICANCE AND USE
4.1 These test methods are suitable for quality control, specification testing, and research. The specific gravity is necessary when converting kinematic viscosity to absolute viscosity.
SCOPE
1.1 These test methods measure the specific gravity of polyols. Test Method A measures the specific gravity of polyols using a pycnometer and Test Method B lists a reference for measuring the specific gravity of liquids using a density meter that is applicable to polyols (see Note 1).  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: There is no known ISO equivalent to this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D4878-23(Test Method)
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols

SIGNIFICANCE AND USE
4.1 These test methods are suitable for research or as quality control or specification tests.  
4.2 Viscosity measures the resistance of a fluid to uniformly continuous flow without turbulence or other forces.
SCOPE
1.1 These test methods (A and B) determine the viscosity of polyols in the range from 10 to 100 000 mPa·s(cP) at 25°C. Test Method A is a rotational procedure for determining dynamic viscosity. Test Method B is a general procedure for kinematic viscosity of transparent polyols. (See Note 1.)  
1.2 The values stated in SI units are to be regarded as the standard. Other equivalent units are provided because of current common usage.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: Test Method A is equivalent to ISO 3219. Test Method B is equivalent to ISO 3104.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D4889-21(Test Method)
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

SIGNIFICANCE AND USE
4.1 These test methods can be used for research, quality control, or specification tests to characterize isocyanates used in polyurethane products.  
4.2 Viscosity measures the resistance of a fluid to uniform continuous flow without turbulence or other forces.  
4.3 Some isocyanates exhibit non-Newtonian behavior under certain conditions. Whenever possible, generate results for comparison under the same conditions, that is, the same spindle/speed combination for rotational viscosity and the same tube size for kinematic viscosity.
SCOPE
1.1 These test methods (A and B) determine the viscosity of crude or modified isocyanates. They are applicable to products derived from toluene diisocyanate, methylene di(phenylisocyanate), and polymeric (methylene phenylisocyanate) (see Note 1).
Note 1: Test method A includes a procedure for measuring dynamic viscosity using a rotational instrument. Test method B is a general procedure for kinematic viscosity of isocyanate.  
1.2 The values stated in SI units are to be regarded as standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazards statement, see Warning at the end of 5.1.
Note 2: Test Method A is equivalent to ISO 3219, Test Method B is equivalent to ISO 3104.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D4662-20(Test Method)
Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

SIGNIFICANCE AND USE
5.1 These test methods are suitable for quality control, as specification tests, and for research. The acid and alkalinity numbers indicate the extent of a reaction with acids. The results are measures of batch-to-batch uniformity and are typically used as correction factors in calculating hydroxyl number.
SCOPE
1.1 These test methods measure the acidic and basic constituents in polyols and other materials of high acidity or alkalinity that are soluble in mixtures of toluene and ethyl alcohol. These test methods do not apply to polyethers. (See Note 1.)  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: There is no known ISO equivalent to this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D4659-19(Test Method)
Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates

SIGNIFICANCE AND USE
4.1 These test methods can be used for research or for quality control to characterize isocyanates used in polyurethane products.  
4.2 A general test method for specific gravity using a digital density meter, which applies to isocyanates as well as other liquids is published in Test Method D4052.
SCOPE
1.1 These test methods determine the specific gravity of toluenediisocyanate, polymeric (methylene phenylisocyanate), and liquid methylene di(phenylisocyanate). These test methods also are applicable to many other liquids. (See Note 1.)  
1.1.1 Test Method A—Specific gravity by pycnometer, for high-accuracy determination.  
1.1.2 Test Method B—Specific gravity by hydrometer, for a less accurate, but rapid, determination.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: There is no known ISO equivalent to this standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D4890-18(Test Method)
Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

SIGNIFICANCE AND USE
5.1 These test methods are suitable for quality control, as specification tests, and for research. Color is an important property of urethane products.
SCOPE
1.1 These test methods measure visually the color of clear polyester and polyether liquids. They apply only to materials whose colors have light-absorption characteristics similar to those of the standards. An alternative method is Test Method D1209 (see Note 1).  
1.2 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.  
Note 1: Test Method A of this standard is equivalent to ISO 6271-1. Test Method B of this standard is equivalent to ISO 4630-1.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D4669-24(Test Method)
Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

SIGNIFICANCE AND USE
4.1 These test methods are suitable for quality control, specification testing, and research. The specific gravity is necessary when converting kinematic viscosity to absolute viscosity.
SCOPE
1.1 These test methods measure the specific gravity of polyols. Test Method A measures the specific gravity of polyols using a pycnometer and Test Method B lists a reference for measuring the specific gravity of liquids using a density meter that is applicable to polyols (see Note 1).  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: There is no known ISO equivalent to this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D4878-23(Test Method)
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols

SIGNIFICANCE AND USE
4.1 These test methods are suitable for research or as quality control or specification tests.  
4.2 Viscosity measures the resistance of a fluid to uniformly continuous flow without turbulence or other forces.
SCOPE
1.1 These test methods (A and B) determine the viscosity of polyols in the range from 10 to 100 000 mPa·s(cP) at 25°C. Test Method A is a rotational procedure for determining dynamic viscosity. Test Method B is a general procedure for kinematic viscosity of transparent polyols. (See Note 1.)  
1.2 The values stated in SI units are to be regarded as the standard. Other equivalent units are provided because of current common usage.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: Test Method A is equivalent to ISO 3219. Test Method B is equivalent to ISO 3104.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D4889-21(Test Method)
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

SIGNIFICANCE AND USE
4.1 These test methods can be used for research, quality control, or specification tests to characterize isocyanates used in polyurethane products.  
4.2 Viscosity measures the resistance of a fluid to uniform continuous flow without turbulence or other forces.  
4.3 Some isocyanates exhibit non-Newtonian behavior under certain conditions. Whenever possible, generate results for comparison under the same conditions, that is, the same spindle/speed combination for rotational viscosity and the same tube size for kinematic viscosity.
SCOPE
1.1 These test methods (A and B) determine the viscosity of crude or modified isocyanates. They are applicable to products derived from toluene diisocyanate, methylene di(phenylisocyanate), and polymeric (methylene phenylisocyanate) (see Note 1).
Note 1: Test method A includes a procedure for measuring dynamic viscosity using a rotational instrument. Test method B is a general procedure for kinematic viscosity of isocyanate.  
1.2 The values stated in SI units are to be regarded as standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazards statement, see Warning at the end of 5.1.
Note 2: Test Method A is equivalent to ISO 3219, Test Method B is equivalent to ISO 3104.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D4662-20(Test Method)
Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

SIGNIFICANCE AND USE
5.1 These test methods are suitable for quality control, as specification tests, and for research. The acid and alkalinity numbers indicate the extent of a reaction with acids. The results are measures of batch-to-batch uniformity and are typically used as correction factors in calculating hydroxyl number.
SCOPE
1.1 These test methods measure the acidic and basic constituents in polyols and other materials of high acidity or alkalinity that are soluble in mixtures of toluene and ethyl alcohol. These test methods do not apply to polyethers. (See Note 1.)  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: There is no known ISO equivalent to this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off