ASTM A1016/A1016M-18
(Specification)Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
ABSTRACT
This specification covers general requirements for ferritic alloy steel, austenitic alloy steel, and stainless steel tubes. The steel shall made by any process. The material shall conform to the tensile property requirements prescribed in the individual product specification. Yield strength tests and elongation tests shall be made to conform to the requirements. Flattening test, reverse flattening test, reverse bend test, flaring test, flange test, hardness test, ultrasonic test, eddy current test, flux leakage test, and hydrostatic test shall be made to conform to the requirements specified.
SCOPE
1.1 This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.
Title of Specification
ASTM
DesignationA
Seamless Carbon-Molybdenum Alloy-Steel Boiler and
Superheater Tubes
A209/A209M
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater,
and Heat-Exchanger Tubes
A213/A213M
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger,
and Condenser Tubes
A249/A249M
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and
Superheater Tubes
A250/A250M
Seamless and Welded Ferritic and Martensitic Stainless Steel
Tubing for General Service
A268/A268M
Seamless and Welded Austenitic Stainless Steel Tubing for
General Service
A269/A269M
Seamless and Welded Austenitic and Ferritic/Austenitic
Stainless Steel Sanitary Tubing
A270/A270M
Seamless and Welded Carbon and Alloy-Steel Tubes for
Low-Temperature Service
A334/A334M
Welded Austenitic Stainless Steel Feedwater Heater Tubes
A688/A688M
Austenitic Stainless Steel Tubing for Breeder Reactor Core
Components
A771/A771M
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing
for General Service
A789/A789M
Seamless and Welded Ferritic Stainless Steel Feedwater Heater
Tubes
A803/A803M
Seamless Austenitic and Martensitic Stainless Steel Duct
Tubes for Liquid Metal-Cooled Reactor Core Components
A826/A826M
High-Frequency Induction Welded, Unannealed, Austenitic
Steel Condenser Tubes
A851
Welded Austenitic Alloy Steel Boiler, Superheater, Condenser,
and Heat Exchanger Tubes with Textured Surface(s)
A1098/A1098M(A) These designations refer to the latest issue of the respective specifications.
1.2 In the case of conflict between a requirement of a product specification and a requirement of this general requirements specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order shall prevail.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation (SI) of the product specification is specified in the order.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:A1016/A1016M −18
Standard Specification for
General Requirements for Ferritic Alloy Steel, Austenitic
1
Alloy Steel, and Stainless Steel Tubes
This standard is issued under the fixed designation A1016/A1016M; the number immediately following the designation indicates the
year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last
reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* specification and a more stringent requirement of the purchase
order, the purchase order shall prevail.
1.1 This specification covers a group of requirements that,
unless otherwise specified in an individual specification, shall 1.3 The values stated in either SI units or inch-pound units
are to be regarded separately as standard. Within the text, the
apply to the ASTM product specifications noted below.
SI units are shown in brackets. The values stated in each
Title of Specification ASTM
A
Designation system may not be exact equivalents; therefore, each system
shall be used independently of the other. Combining values
Seamless Carbon-Molybdenum Alloy-Steel Boiler and A209/A209M
from the two systems may result in non-conformance with the
Superheater Tubes
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, A213/A213M
standard. The inch-pound units shall apply unless the “M”
and Heat-Exchanger Tubes
designation (SI) of the product specification is specified in the
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, A249/A249M
order.
and Condenser Tubes
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and A250/A250M
1.4 This international standard was developed in accor-
Superheater Tubes
dance with internationally recognized principles on standard-
Seamless and Welded Ferritic and Martensitic Stainless Steel A268/A268M
Tubing for General Service
ization established in the Decision on Principles for the
Seamless and Welded Austenitic Stainless Steel Tubing for A269/A269M
Development of International Standards, Guides and Recom-
General Service
mendations issued by the World Trade Organization Technical
Seamless and Welded Austenitic and Ferritic/Austenitic A270/A270M
Stainless Steel Sanitary Tubing
Barriers to Trade (TBT) Committee.
Seamless and Welded Carbon and Alloy-Steel Tubes for A334/A334M
Low-Temperature Service
2. Referenced Documents
Welded Austenitic Stainless Steel Feedwater Heater Tubes A688/A688M
2
Austenitic Stainless Steel Tubing for Breeder Reactor Core A771/A771M
2.1 ASTM Standards:
Components
A209/A209M Specification for Seamless Carbon-
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing A789/A789M
for General Service Molybdenum Alloy-Steel Boiler and Superheater Tubes
Seamless and Welded Ferritic Stainless Steel Feedwater Heater A803/A803M
A213/A213M Specification for Seamless Ferritic and Aus-
Tubes
tenitic Alloy-Steel Boiler, Superheater, and Heat-
Seamless Austenitic and Martensitic Stainless Steel Duct A826/A826M
Tubes for Liquid Metal-Cooled Reactor Core Components
Exchanger Tubes
High-Frequency Induction Welded, Unannealed, Austenitic A851
A249/A249M Specification for Welded Austenitic Steel
Steel Condenser Tubes
Boiler, Superheater, Heat-Exchanger, and Condenser
Welded Austenitic Alloy Steel Boiler, Superheater, Condenser, A1098/A1098M
and Heat Exchanger Tubes with Textured Surface(s)
Tubes
A250/A250M Specification for Electric-Resistance-Welded
A
These designations refer to the latest issue of the respective specifications.
Ferritic Alloy-Steel Boiler and Superheater Tubes (With-
3
1.2 In the case of conflict between a requirement of a drawn 2017)
product specification and a requirement of this general require- A268/A268M Specification for Seamless and Welded Fer-
ments specification, the product specification shall prevail. In ritic and Martensitic Stainless Steel Tubing for General
the case of conflict between a requirement of the product Service
specification or a requirement of this general requirements
A269/A269M Specification for Seamless and Welded Aus-
tenitic Stainless Steel Tubing for General Service
1 2
This specification is under the jurisdiction ofASTM Committee A01 on Steel, For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
A01.10 on Stainless and Alloy Steel Tubular Products. Standards volume information, refer to the standard’s Document Summary page on
Current edition approved March 1, 2018. Published March 2018. Originally the ASTM website.
3
approvedin2001.Lastpreviouseditionapprovedin2017asA1016/A1016M – 17a. The last approved version of this historical standard is referenced on
DOI: 10
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: A1016/A1016M − 17a A1016/A1016M − 18
Standard Specification for
General Requirements for Ferritic Alloy Steel, Austenitic
1
Alloy Steel, and Stainless Steel Tubes
This standard is issued under the fixed designation A1016/A1016M; the number immediately following the designation indicates the
year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last
reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply
to the ASTM product specifications noted below.
Title of Specification ASTM
A
Designation
Seamless Carbon-Molybdenum Alloy-Steel Boiler and A209/A209M
Superheater Tubes
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, A213/A213M
and Heat-Exchanger Tubes
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, A249/A249M
and Condenser Tubes
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and A250/A250M
Superheater Tubes
Seamless and Welded Ferritic and Martensitic Stainless Steel A268/A268M
Tubing for General Service
Seamless and Welded Austenitic Stainless Steel Tubing for A269/A269M
General Service
Seamless and Welded Austenitic Stainless Steel A270/A270M
Sanitary
Tubing
Seamless and Welded Austenitic and Ferritic/Austenitic A270/A270M
Stainless Steel Sanitary
Tubing
Seamless and Welded Carbon and Alloy-Steel Tubes for A334/A334M
Low-Temperature Service
Welded Austenitic Stainless Steel Feedwater Heater Tubes A688/A688M
Austenitic Stainless Steel Tubing for Breeder Reactor Core A771/A771M
Components
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing A789/A789M
for General Service
Welded Ferritic Stainless Steel Feedwater Heater A803/A803M
Tubes
Seamless and Welded Ferritic Stainless Steel Feedwater Heater A803/A803M
Tubes
Austenitic and Ferritic Stainless Steel Duct A826/A826M
Tubes for Breeder
Reactor Core Components
Seamless Austenitic and Martensitic Stainless Steel Duct A826/A826M
Tubes for Liquid Metal-Cooled
Reactor Core Components
High-Frequency Induction Welded, Unannealed Austenitic A851
Steel
Condenser Tubes
High-Frequency Induction Welded, Unannealed, Austenitic A851
Steel Condenser
Tubes
Welded Austenitic Alloy Steel Boiler, Superheater, Condenser, A1098/A1098M
and Heat Exchanger Tubes with Textured Surface(s)
1
This specification is under the jurisdiction of ASTM Committee A01 on Steel, Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee A01.10
on Stainless and Alloy Steel Tubular Products.
Current edition approved Sept. 1, 2017March 1, 2018. Published September 2017March 2018. Originally approved in 2001. Last previous edition approved in 2017 as
A1016/A1016M – 17.A1016/A1016M – 17a. DOI: 10.1520/A1016_A1016M-17A.10.1520/A1016_A1016M-18.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
A1016/A1016M − 18
A
These designations refer to the latest issue of the respective specifications.
1.2 In the case of conflict between a requirement of a product specification and a requirement of this general requirements
specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or
a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order
shall prevail.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units
are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used
independently of the other. Combining values from the two systems may result in non-conformance with the standard. The
inch-pound units shall apply unless the “M” designation (SI) of the product specification is specified in the order.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
A209/A209M Specifica
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.