ASTM E1434-00(2006)

Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases

SCOPE
1.1 This guide provides a common format for mechanical test data for composite materials for two purposes: (1) to establish data reporting requirements for test methods and ( 2) to provide information for the design of material property databases. This guide should be used in combination with Guide E 1309 which provides similar information to identify the composite material tested.
1.2 These guidelines are specific to mechanical tests of high-modulus fiber-reinforced composite materials. Types of tests considered in this guide include tension, compression, shear, flexure, open/filled hole, bearing, fracture toughness, and fatigue. The ASTM standards for which this guide was developed are listed in . The guidelines may also be useful for additional tests or materials.
1.3 This guide is the second part of a modular approach for which the first part is Guide E 1309. Guide E 1309 serves to identify the material, and this guide serves to describe mechanical testing procedures and variables and to record results. The interaction of this guide with Guide E 1309 is emphasized by the common numbering of data elements. Data Elements A1 through G13 are included in Guide E 1309 and numbering data elements in this guide begins with H1.
1.4 This guide with Guide E 1309 may be referenced by the data-reporting section of a test method to provide common data-reporting requirements for the types of tests listed in .
1.5 From this information and Guide E 1309, the database designer should be able to construct the data dictionary preparatory to developing a database schema.
1.6 Data elements in this guide are relevant to test data, data as obtained in the test laboratory and historically recorded in lab notebooks. Property data, data which have been analyzed and reviewed, require a different level of data elements. Data elements for property data are provided in .

General Information

• Status: Historical
• Publication Date: 14-Jan-2006
• ICS: 35.240.50 - IT applications in industry
• ICS: 83.120 - Reinforced plastics
• Technical Committee: D30 - Composite Materials
• Drafting Committee: D30.01 - Editorial and Resource Standards

Relations

• Replaces: ASTM E1434-00 - Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
• Effective Date: 15-Jan-2006
• Replaced By: ASTM E1434-00(2013) - Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases (Withdrawn 2015)
• Effective Date: 01-May-2013
• Referred By: ASTM D5766/D5766M-23 - Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
• Effective Date: 15-Jan-2006
• Referred By: ASTM D7078/D7078M-20e1 - Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
• Effective Date: 15-Jan-2006
• Referred By: ASTM E3370-23 - Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals
• Effective Date: 15-Jan-2006
• Referred By: ASTM D6641/D6641M-16e2 - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
• Effective Date: 15-Jan-2006
• Referred By: ASTM E2581-14(2019) - Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications
• Effective Date: 15-Jan-2006
• Referred By: ASTM E2982-21 - Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications
• Effective Date: 15-Jan-2006
• Referred By: ASTM D7905/D7905M-19e1 - Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
• Effective Date: 15-Jan-2006
• Referred By: ASTM D5467/D5467M-97(2017) - Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
• Effective Date: 15-Jan-2006
• Referred By: ASTM E2580-17 - Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
• Effective Date: 15-Jan-2006
• Referred By: ASTM D7332/D7332M-22 - Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite
• Effective Date: 15-Jan-2006
• Referred By: ASTM D7028-07(2015) - Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
• Effective Date: 15-Jan-2006
• Referred By: ASTM D8069-17a - Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
• Effective Date: 15-Jan-2006
• Referred By: ASTM D3410/D3410M-16e1 - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
• Effective Date: 15-Jan-2006

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E1434 − 00(Reapproved 2006)
Standard Guide for
Recording Mechanical Test Data of Fiber-Reinforced
1
Composite Materials in Databases
This standard is issued under the fixed designation E1434; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope and reviewed, require a different level of data elements. Data
elements for property data are provided in Annex A1.
1.1 This guide provides a common format for mechanical
test data for composite materials for two purposes: (1)to
2. Referenced Documents
establish data reporting requirements for test methods and (2)
3
2.1 ASTM Standards:
to provide information for the design of material property
D790 Test Methods for Flexural Properties of Unreinforced
databases. This guide should be used in combination with
and Reinforced Plastics and Electrical Insulating Materi-
Guide E1309 which provides similar information to identify
als
the composite material tested.
D3039/D3039M Test Method forTensile Properties of Poly-
1.2 These guidelines are specific to mechanical tests of
mer Matrix Composite Materials
high-modulus fiber-reinforced composite materials. Types of
D3410/D3410M Test Method for Compressive Properties of
tests considered in this guide include tension, compression,
Polymer Matrix Composite Materials with Unsupported
2
shear, flexure, open/filled hole, bearing, fracture toughness,
Gage Section by Shear Loading
and fatigue. The ASTM standards for which this guide was
D3518/D3518M Test Method for In-Plane Shear Response
developed are listed in 2.1. The guidelines may also be useful
ofPolymerMatrixCompositeMaterialsbyTensileTestof
for additional tests or materials.
a 645° Laminate
1.3 This guide is the second part of a modular approach for
D3552 Test Method for Tensile Properties of Fiber Rein-
which the first part is Guide E1309. Guide E1309 serves to forced Metal Matrix Composites
identify the material, and this guide serves to describe me-
D3878 Terminology for Composite Materials
chanical testing procedures and variables and to record results. D5229/D5229M TestMethodforMoistureAbsorptionProp-
The interaction of this guide with Guide E1309 is emphasized
erties and Equilibrium Conditioning of Polymer Matrix
bythecommonnumberingofdataelements.DataElementsA1
Composite Materials
through G13 are included in Guide E1309 and numbering data D5379/D5379M Test Method for Shear Properties of Com-
elements in this guide begins with H1.
posite Materials by the V-Notched Beam Method
D5449/D5449M Test Method for Transverse Compressive
1.4 This guide with Guide E1309 may be referenced by the
Properties of Hoop Wound Polymer Matrix Composite
data-reporting section of a test method to provide common
Cylinders
data-reporting requirements for the types of tests listed in 1.2.
D5528 TestMethodforModeIInterlaminarFractureTough-
1.5 From this information and Guide E1309, the database
ness of Unidirectional Fiber-Reinforced Polymer Matrix
designer should be able to construct the data dictionary
Composites
preparatory to developing a database schema.
D5961/D5961M Test Method for Bearing Response of Poly-
1.6 Dataelementsinthisguidearerelevanttotestdata,data mer Matrix Composite Laminates
as obtained in the test laboratory and historically recorded in D6115 Test Method for Mode I Fatigue Delamination
lab notebooks. Property data, data which have been analyzed Growth Onset of Unidirectional Fiber-Reinforced Poly-
mer Matrix Composites
E6 Terminology Relating to Methods of Mechanical Testing
E111 Test Method for Young’s Modulus, Tangent Modulus,
1
This guide is under the jurisdiction of ASTM Committee D30 on Composite
and Chord Modulus
Materials and is the direct responsibility of Subcommittee D30.01 on Editorial and
Resource Standards.
Current edition approved Jan. 15, 2006. Published January 2006. Originally
3
approved in 1991. Last previous edition approved in 2000 as E1434 – 00. DOI: For referenced ASTM standards, visit the ASTM website, www.astm.org, or
10.1520/E1434-00R06. contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
2
Documentation requirements for filled-hole tests were based on open-hole tests Standards volume information, refer to the standard’s Document Summary page on
with the addition of fastener identification and application information. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E1434 − 00 (2006)
E1309 Guide for Identification of Fiber-Reinforced database for the possible collecti
...