iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F1073-87(2012)

(Specification)

Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

ABSTRACT
This specification covers the principal design and type of material for manufacturing fittings for watertight/gastight/airtight, weathertight, and non-tight doors, for marine use. The fittings are intended for use on all doors for marine use, except joiner and expanded metal doors. The dogs and hinges shall be classified as follows: Dog A and B; hinge A and B. All securing screws and fasteners shall be of stainless steel.
SCOPE
1.1 This specification covers the principal design and type of material for manufacturing fittings for watertight/gastight/airtight, weathertight, and non-tight doors, for marine use. Note that “gastight” is commercial terminology which also means “airtight” in naval terminology.  
1.2 The fittings are intended for use on all doors for marine use, except joiner and expanded metal doors.

General Information

Status
Historical
Publication Date
30-Sep-2012
ICS
47.020.10 - Hulls and their structure elements
Technical Committee
F25 - Ships and Marine Technology
Drafting Committee
F25.03 - Outfitting and Deck Machinery
Current Stage
Ref Project

Relations

Replaces
ASTM F1073-87(2007) - Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
Effective Date
01-Oct-2012
Replaced By
ASTM F1073-19 - Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
Effective Date
01-Mar-2019
Referred By
ASTM F1069-19 - Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
Effective Date
01-Oct-2012
Referred By
ASTM F1068-90(2023) - Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
Effective Date
01-Oct-2012
Referred By
ASTM F1070-19 - Standard Specification for Doors, Non-Tight, for Marine Use
Effective Date
01-Oct-2012

Buy Standard

ASTM F1073-87(2012) - Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine UseASTM F1073-87(2012) - Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
PreviousNext
Technical specification
ASTM F1073-87(2012) - Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F1073 −87 (Reapproved 2012) An American National Standard
Standard Specification for
Door Fittings, for Watertight /Gastight /Airtight,
Weathertight, and Non-Tight Doors, for Marine Use
This standard is issued under the fixed designation F1073; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 2.3 Federal Specifications:
QQ-C-390 Copper Alloy Castings
1.1 This specification covers the principal design and type
TT-E-490 Enamel-Silicone Alkyd Copolymer, Semi-gloss,
of material for manufacturing fittings for watertight/gastight/
Exterior
airtight,weathertight,andnon-tightdoors,formarineuse.Note
2.4 ANSI Standard:
that “gastight” is commercial terminology which also means
A2.6 Standard for Fire Tests of Window Assemblies
“airtight” in naval terminology.
2.5 AISI Standard:
1.2 The fittings are intended for use on all doors for marine
316 Low Alloy Stainless Steel (Cres 316)
use, except joiner and expanded metal doors.
3. Classification
2. Referenced Documents
3.1 The dogs and hinges shall be classified as given in Table
2.1 ASTM Standards:
1.
A36/A36M Specification for Carbon Structural Steel
A240/A240M Specification for Chromium and Chromium-
4. Ordering Information
Nickel Stainless Steel Plate, Sheet, and Strip for Pressure
4.1 Ordering for fittings shall be indicated on the purchase
Vessels and for General Applications
order prepared for doors, with reference to this specification
A276 Specification for Stainless Steel Bars and Shapes
noted.
A563 Specification for Carbon and Alloy Steel Nuts
A668/A668M Specification for Steel Forgings, Carbon and
4.2 When ordering fittings, indicate the following:
Alloy, for General Industrial Use
4.2.1 Type,
B140/B140M Specification for Copper-Zinc-Lead (Red
4.2.2 Quantity,
Brass or Hardware Bronze) Rod, Bar, and Shapes
4.2.3 Marking (see Section 8), and
B210 Specification for Aluminum and Aluminum-Alloy
4.3 Inspection and acceptance of fittings shall be agreed
Drawn Seamless Tubes
upon between the purchaser and the supplier.
2.2 Military Standards:
MIL-P-24441 Epoxy-Polyamide Paint
5. Materials and Manufacture
MIL-P-17578A Packing Material, Plastic (for Dogs for Wa-
5.1 The material shall be as specified in Tables 2-4.
tertight Closures) (Symbol 1425)
MIL-C-81706 Coating, Aluminum and Aluminum Alloys 5.2 All securing screws and fasteners shall be of stainless
DOD-STD-2138 Metal Sprayed Coating Systems for Corro- steel, Type 316.
sion Protection
5.3 All glazing in portlights of fire door shall meet ANSI
A2.6.
This specification is under the jurisdiction of ASTM Committee F25 on Ships
6. Construction, Shape, and Dimensions
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
Outfitting and Deck Machinery.
6.1 The construction, shape, and dimensions for dogs and
Current edition approved Oct. 1, 2012. Published October 2012. Originally
hinges shall be as shown in Figs. 1-9.
approved in 1987. Last previous edition approved in 2007 as F1073 – 87(2007).
DOI: 10.1520/F1073-87R12.
6.2 Door dogs shall be supplied with hold-open clips.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, 4th Floor, New York, NY 10036, http://www.ansi.org.
Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http:// Available from American Iron and Steel Institute (AISI), 1140 Connecticut
www.dodssp.daps.mil. Ave., NW, Suite 705, Washington, DC 20036, http://www.steel.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
F1073−87 (2012)
TABLE 1 Classification of Dogs and Hinges
Type Description
Dog:
A Fitted to door
B Fitted to door frame
Hinge:
A With clenched pin
B With clenched pin secured with cotter pin
TABLE 2 Material for Door Dogs
Component
Mild Steel Aluminum Glass-Reinforced Plastic
Number Item
1 Handle interior Specification A668/A668M Specification A668/A668M Specification A668/A668M
2 Handle exterior Specification A668/A668M Specification A668/A668M Specification A668/A668M
3 Jam nut Specification A563 Specification A563 Specification A276
4 Spring washer steel commercial AISI (316) AISI (316)
5 Washer steel commercial steel commercial steel commercial
6 Dog sleeve Specification A36/A36M Specification B210 (AL-5086) Specification B210 (AL 5086)
7 Bushing oil impregnated bronze oil impregnated bronze oil impregnated bronze
8 Packing MIL-P-17578A MIL-P-17578A MIL-P-17578A
9 Packing gland MIL-P-17578A MIL-P-17578A MIL-P-17578A
10 Grease fitting Specification B140/B140M Specification B140/B140M Specification B140/B140M
11 Wedge QQ-C-390 Specification B210 QQ-C-390
TABLE 3 Material for Door Hinges
Component
Mi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F3040/F3040M-13(2023)(Test Method)
Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads

SIGNIFICANCE AND USE
4.1 The test method provides information regarding the behavior of a non-structural A, B, or C-Class bulkhead panel system under a static load. Test data for load, moment and deformation is measured.  
4.2 Static load test of non-structural marine joiner panel systems provide a standard method of obtaining data for research and development, quality control, acceptance or rejection under specifications, and special purposes. The tests cannot be considered significant for engineering design in applications differing widely from the loading type and magnitude of the standard test. Such applications shall require additional tests.
SCOPE
1.1 This test method covers a procedure for evaluating the strength of non structural marine joiner of A, B, and C-Class bulkhead and liner systems. A, B, and C-Class bulkheads are defined and discussed in 2.1.  
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM F783-88(2023)(Specification)
Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung

ABSTRACT
This specification provides the design and dimensional requirements for the construction of steel staples, handgrabs, and handles that are for use on steel structures including all parts of a ships' structure as necessary, as well as individual stirrup rungs that are for use on bulkheads or structures as deemed necessary.
SCOPE
1.1 This specification covers design, construction for steel staples, handgrabs, handles, and individual stirrup rungs.  
1.2 The staples, handgrabs, and handles depicted in this specification are for use on steel structures including all parts of ships' structure as necessary. The individual stirrup rungs are for use on bulkheads or structure as deemed necessary.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F821/F821M-23(Specification)
Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

ABSTRACT
This specification covers the design and dimensional requirements for the construction of standard and custom-built interior steel doors and frames intended for use in staterooms, lavatories, passageways, and other weather-protected areas of ships, including U.S. Coast Guard certificated vessels, with domestic routes. The doors and frames are to be of hollow metal construction with the door insulated for sound or fire. The doors and frames shall conform to the specified dimensional and construction procedures established for each class and type, which shall be indicated in the ordering information.
SCOPE
1.1 This specification covers the construction of standard and custom-built interior steel doors and frames for ships including U.S. Coast Guard certificated vessels with domestic routes.  
1.2 Doors and frames are to be hollow metal construction with the door insulated for sound or fire.  
1.3 The doors are intended for use in staterooms, lavatories, passageways, and other areas protected from weather.  
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    6 pages
    English language
    sale 15% off
  • Technical specification
    6 pages
    English language
    sale 15% off
ASTM
ASTM F985-18(2023)(Specification)
Standard Specification for Pilot Platform

ABSTRACT
This specification provides design and construction details for Panama Canal pilot platforms placed aboard the vessel. Platforms shall conform to the requirements of the Panama Canal Commission and Title 35 of the Code of Federal Regulations. The platforms shall be welded-aluminum construction. Decking shall be serrated-aluminum grating. Canopy shall be of vinyl-nylon construction with sewn seams and metallic grommets. Finally, canopy tie-downs shall be of a specified nylon line thickness.
SCOPE
1.1 This specification covers design and construction details for pilot platforms.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    8 pages
    English language
    sale 15% off
ASTM
ASTM F1068-90(2023)(Specification)
Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

ABSTRACT
This specification covers the principal dimensions and the mechanical requirements for manufacturing individually dogged, airtight/gastight double doors of steel and aluminum construction for personnel access through bulkheads, complete with frames, intended to maintain the structural and the air and gas tightness integrity of the bulkheads.
SCOPE
1.1 This specification, to be used in conjunction with Specification F1073, covers the principal dimensions and the mechanical requirements for manufacturing steel and aluminum individually dogged, airtight/gastight double doors for personnel access through bulkheads, complete with frames, intended to maintain the structural and the air and gas tightness integrity of the bulkheads.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 The following precautionary caveat pertains only to the Test Methods portion, Section 6, of this specification:  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1385-07(2023)(Practice)
Standard Practice for Platforms in Cargo Tanks

SIGNIFICANCE AND USE
3.1 This practice establishes the procedure for the construction and installation of platforms to be fabricated and installed by the shipyards within the cargo tanks.
SCOPE
1.1 This practice covers design, construction, and installation criteria for platforms in cargo tanks.  
1.2 Where platforms are attached to ladders see Figs. 1-4.
FIG. 1 Cargo Platform—Bulkhead  
FIG. 2 Cargo Platform Elevation  
FIG. 3 Cargo Platform—Girder  
FIG. 4 Cargo Platforms Showing Typical Sections  
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are included for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM F1071-94(2023)(Specification)
Standard Specification for Expanded-Metal Bulkhead Panels

ABSTRACT
This specification covers steel expanded-metal bulkhead panels suitable for use in storerooms, shops, and as protection against personnel hazards. Bulkhead panels are furnished in three types as follows: type I - universal bulkhead panels for use as both a right-hand or left-hand panel, type II - right-hand bulkhead panel, and type III - left-hand bulkhead panel. Bulkhead panels are furnished in two classes as follows: class A - bulkhead panels, 2 ft; and class B - bulkhead panels, 3 ft. Expanded-metal panels shall be free from all cracks, burrs, sharp edges, and other defects. The panel manufacturer shall apply a nonhazardous corrosion-inhibiting primer coating to all panel assemblies.
SCOPE
1.1 This specification covers steel expanded-metal bulkhead panels suitable for use in storerooms, shops, and as protection against personnel hazards.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1072-94(2023)(Specification)
Standard Specification for Expanded-Metal Doors

ABSTRACT
This specification covers steel expanded-metal doors suitable for installation in expanded-metal bulkheads, structural bulkheads, and structural arches. Expanded-metal doors are furnished in four types: Type I (right hand), Type II (left hand), Type III (right hand reverse) and Type IV (left hand reverse). Doors shall be furnished with the vertical support channels and top angle in place. A temporary brace shall be included at the frame bottom to prevent racking. Doors shall be fitted with rubber-tipped bumpers and a manually operated catch for holding doors in an open position. Provision shall be made for the installation of a rim latch set operated by knobs on both sides. Doors and frames shall be free from all cracks, burrs, sharp edges, and other defects.
SCOPE
1.1 This specification covers steel expanded-metal doors suitable for installation in expanded-metal bulkheads, structural bulkheads, and structural arches.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM F1455-92(2022)(Guide)
Standard Guide for Selection of Structural Details for Ship Construction

ABSTRACT
This guide provides a recommended list of selected ship structure details for use in ship construction. Structural details which have failed in service and are not recommended for use in ship construction are included as well. This guide is intended to convey the lessons learned on different configurations of ship structure details, not the dimensions, thickness, or construction methods which would result from structural calculations. Details are shown for the ten families of structural details, which are: beam brackets, clearance cut-outs, gunwale connections, miscellaneous cut-outs, non-tight collars, panel stiffeners, stanchion ends, stiffener ends, tight collars, and tripping brackets. Evaluation of details is based on in-service experience as described in "Design Guide for Structural Details". Data for over 400 details is summarized and rated by observed relative successful performance. Each of the ten families of details includes configurations with no signs of failures. The details without failures within each family group are shown in descending order of numbers observed. Those details with failures are shown in ascending order of failures (percentages are indicated for each). Thus the first detail shown in each family group has the best observed service performance and is most highly recommended while the last has the highest failure rate and therefore least desirable. The details provide guidance in the selection of structural detail configurations in future design and repair of such details.
SCOPE
1.1 This guide provides a recommended list of selected ship structure details for use in ship construction.  
1.2 Structural details which have failed in service and are not recommended for use in ship construction are included as well.  
1.3 This guide is intended to convey the lessons learned on different configurations of ship structure details, not the dimensions, thickness, or construction methods which would result from structural calculations.4  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    19 pages
    English language
    sale 15% off
ASTM
ASTM F987-04(2022)(Specification)
Standard Specification for Portable Intermediate Flush Deck Stanchion

ABSTRACT
This specification covers the design, construction, and installation details of two-course (Type I) and three-course (Type II) portable intermediate flush deck stanchions that are used on interior and exterior decks to provide temporary protection and minimize the danger of personnel falling overboard or to a lower level in the ship in areas where the installation of a fixed system would interfere with vessel operations. This specification does not include the requirements for the chain or wire rope lines to be supported by the stanchion. The stanchions shall be free of weld spatters, slag splinters, sharp edges, burrs, projections, and other defects hazardous to personnel, and the deck sockets shall be hammer tested for soundness and strength.
SCOPE
1.1 This specification covers the design, construction, and installation of intermediate portable flush deck stanchions. Intermediate stanchion is defined as any stanchion that is not an end or corner stanchion.  
1.2 Stanchions shall be used on interior and exterior decks, to provide temporary protection to minimize the danger of personnel falling overboard or to a lower level in the ship in areas where the installation of a fixed system would interfere with vessel operations.  
1.3 Stanchions may be used with 3/8-in. (9.5-mm) galvanized close link chain or wire rope lifelines 9/16-in. (14-mm) top course, 7/16-in. (11-mm) lower courses.  
1.4 This specification covers only the stanchions and does not cover requirements for the chain or wire rope lines to be supported by the stanchion.  
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off