ASTM G118-02(2015)

Standard Guide for Recommended Format of Wear Test Data Suitable for Databases (Withdrawn 2016)

SIGNIFICANCE AND USE
5.1 This guide can be used to facilitate categorizing wear data for insertion into a computerized database. This guide identifies a set of essential data fields which should be provided for all records, and also identifies additional optional data fields. This guide does not require the use of any particular database format, nor does it endorse any particular computer database software.  
5.2 Because of increased activity in building computerized databases and the desire to encourage their uniformity and therefore the ease of data comparison and data interchange, it is appropriate to provide a guide for the inclusion of wear test data in databases. Availability of a guide also encourages the builders of databases to include sufficiently complete information so that comparisons among individual sources may be made with assurance that similarities or differences, or both, in the wear test procedures and conditions are covered.  
5.3 The set of data fields described in this guide will usually be expanded and customized by the user for specific purposes. It should be possible to arrange the additional fields within the logical structure that is presented in this guide.  
5.4 This guide does not apply to data from rolling contact wear tests, galling tests, or erosion or cavitation tests. Data that are included should apply to standard tests or to steady-state wear.  
5.5 This guide has no implication on data required for materials production or purchase. Reporting of actual test results should be as described in the actual material specification or as agreed upon between the purchaser and the manufacturer, as shown on the purchase order and acknowledgement.
SCOPE
1.1 This guide covers and is intended to assist in the organization of wear test data for the purpose of data storage in computerized databases. It is meant to assist the user in developing databases for the purpose of data comparison and utilization. Data elements (fields) are described covering both materials and wear test issues.
WITHDRAWN RATIONALE
This guide covered and was intended to assist in the organization of wear test data for the purpose of data storage in computerized databases. It was meant to assist the user in developing databases for the purpose of data comparison and utilization. Data elements (fields) were described covering both materials and wear test issues.
Formerly under the jurisdiction of Committee G02 on Wear and Erosion, this guide was withdrawn in November 2016. This standard is being withdrawn without replacement due to its limited use by industry.

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2015
• Withdrawal Date: 10-Nov-2016
• ICS: 35.240.30 - IT applications in information, documentation and publishing
• Technical Committee: G02 - Wear and Erosion

Relations

• Referred By: ASTM G133-22 - Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
• Effective Date: 01-May-2015

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: G118 − 02(Reapproved 2015)
Standard Guide for
Recommended Format of Wear Test Data Suitable for
1
Databases
This standard is issued under the fixed designation G118; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope G115 Guide for Measuring and Reporting Friction Coeffi-
cients
1.1 This guide covers and is intended to assist in the
G132 Test Method for Pin Abrasion Testing
organization of wear test data for the purpose of data storage in
computerized databases. It is meant to assist the user in 2.2 ANSI Standard:
4
developing databases for the purpose of data comparison and B46.1.85 Surface Texture, Surface Roughness, Waviness
utilization. Data elements (fields) are described covering both
materials and wear test issues. 3. Terminology
3.1 Definitions—For definitions of some terms applicable to
2. Referenced Documents
this guide, see Practice E1314 and Terminology G40.
2
2.1 ASTM Standards:
3.2 Definitions of Terms Specific to This Standard:
E527 Practice for Numbering Metals and Alloys in the
3.2.1 class—major material class, for example, metal,
Unified Numbering System (UNS)
ceramic, polymer, etc.
E1314 Practice for Structuring Terminological Records Re-
3.2.2 common name—name frequently given to a particular
lating to Computerized Test Reporting and Materials
3
material, for example, nylon.
Designation Formats (Withdrawn 2000)
E1338 Guide for Identification of Metals and Alloys in
3.2.3 contact environment—terms describing the environ-
Computerized Material Property Databases
ment at the contact, for example, atmosphere, humidity, gases
G40 Terminology Relating to Wear and Erosion
present, and so forth.
G65 Test Method for Measuring Abrasion Using the Dry
3.2.4 form—materialform,forexample,rod,sheet,andcast.
Sand/Rubber Wheel Apparatus
3.2.5 grade—designation given a material by a manufac-
G75 Test Method for Determination of Slurry Abrasivity
turer.
(Miller Number) and Slurry Abrasion Response of Mate-
3.2.6 hardness—usual methods for hardness determinations
rials (SAR Number)
include Rockwell C, Vickers, etc. Load should be specified.
G77 Test Method for Ranking Resistance of Materials to
Sliding Wear Using Block-on-Ring Wear Test
3.2.7 processing treatment—descriptive phrase on the pro-
G83 Test Method for Wear Testing with a Crossed-Cylinder
cess method, for example, casting, hardening, and conditions,
3
Apparatus (Withdrawn 2005)
for example, time, temperature.
G99 Test Method for Wear Testing with a Pin-on-Disk
3.2.8 specification—precise statement of a set of require-
Apparatus
ments to be satisfied by a material, promulgated by an
G105 Test Method for Conducting Wet Sand/Rubber Wheel
organization, for example, ASTM, SAE, etc.
Abrasion Tests
3.2.9 specimen shape—shape of the test specimen, for
example, block, pin.
1
This guide is under the jurisdiction of ASTM Committee G02 on Wear and
3.2.10 standard test specification—test designation, that is,
Erosion and is the direct responsibility of Subcommittee G02.20 on Data Acquisi-
ASTM, SAE, etc. (Note that the test must conform to the
tion in Tribosystems.
standard if so designated.)
Current edition approved May 1, 2015. Published May 2015. Originally
approved in 1993. Last previous edition approved in 2007 as G118–02 (2007). DOI:
3.2.11 subclass—subdivisions of a class, for example,
10.1520/G0118-02R15.
ferrous, boride, etc.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
3 4
The last approved version of this historical standard is referenced on Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
www.astm.org. 4th Floor, New York, NY 10036, http://www.ansi.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
G118 − 02 (2015)
4. Summary of Guide 6.1.5 Specimen Identification—Detailed information on the
test specimens, for example, size, surface texture (ANSI
4.1 This guide specifies a set of fields that form the basis of
B46.1.85).
a format for organizing wear data for use in computerized
6.1.6 Test Results—Listing of the numeric results of the test,
databases. Sufficient information is provided in this guide to
for example, amount of wear, friction coefficient (see Guide
enable the user to construct a database structure suitable for an
G115 for details of friction measurements).
intended app
...