iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 6370-1:2021

(Main)

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991)

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991)

Specifies the requirements for the testing apparatus to be used. Includes a general description and figures.

Emails und Emaillierungen - Bestimmung des Widerstandes gegen Verschleiß - Teil 1: Verschleißprüfgerät (ISO 6370-1:1991)

Dieser Teil der Internationalen Norm ISO 6370 legt die Anforderungen für das Prüfgerät, das zur Bestimmung des Widerstandes gegen Verschleiß von Emailschichten verwendet wird, fest.

Émaux vitrifiés - Détermination de la résistance à l'abrasion - Partie 1: Appareillage d'essai d'abrasion (ISO 6370-1:1991)

Steklasti in porcelanski emajli - Ugotavljanje odpornosti proti površinski obrabi - 1. del: Naprave za preskušanje površinske obrabe (ISO 6370-1:1991)

General Information

Status
Published
Publication Date
05-Oct-2021
Withdrawal Date
29-Apr-2022
ICS
25.220.50 - Enamels
Technical Committee
CEN/TC 262 - Metallic and other inorganic coatings
Drafting Committee
CEN/TC 262/WG 5 - Vitreous enamel coatings
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Oct-2021
Due Date
24-Mar-2023
Completion Date
06-Oct-2021
Ref Project
SIST EN ISO 6370-1:2021 - Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991)

Buy Standard

EN ISO 6370-1:2021EN ISO 6370-1:2021
PreviousNext
Standard
EN ISO 6370-1:2021
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6370-1:2021
01-december-2021
Steklasti in porcelanski emajli - Ugotavljanje odpornosti proti površinski obrabi -
1. del: Naprave za preskušanje površinske obrabe (ISO 6370-1:1991)
Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1:
Abrasion testing apparatus (ISO 6370-1:1991)
Emails und Emaillierungen - Bestimmung des Widerstandes gegen Verschleiß - Teil 1:
Verschleißprüfgerät (ISO 6370-1:1991)
Émaux vitrifiés - Détermination de la résistance à l'abrasion - Partie 1: Appareillage
d'essai d'abrasion (ISO 6370-1:1991)
Ta slovenski standard je istoveten z: EN ISO 6370-1:2021
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 6370-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 6370-1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 6370-1:2021


EN ISO 6370-1
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2021
EUROPÄISCHE NORM
ICS 25.220.50
English Version

Vitreous and porcelain enamels - Determination of the
resistance to abrasion - Part 1: Abrasion testing apparatus
(ISO 6370-1:1991)
Émaux vitrifiés - Détermination de la résistance à Emails und Emaillierungen - Bestimmung des
l'abrasion - Partie 1: Appareillage d'essai d'abrasion Widerstandes gegen Verschleiß - Teil 1:
(ISO 6370-1:1991) Verschleißprüfgerät (ISO 6370-1:1991)
This European Standard was approved by CEN on 20 September 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 4530:2022(Main)
Vitreous and porcelain enamelled manufactured articles - Determination of resistance to heat (ISO 4530:2022)
SIST EN ISO 4530:2023

This document specifies the basic conditions concerning the method for determining the resistance of vitreous and porcelain enamelled articles to heat.
The method specified is applicable to vitreous and porcelain enamelled articles that are, in service, subjected to high temperature, for example, to some cooker components, exhaust pipe silencers, gas heating chimneys and flue pipes.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 28765:2022(Main)
Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2022)
SIST EN ISO 28765:2023

This document specifies the requirements for the design and use of vitreous enamel coated bolted cylindrical steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges.
It is applicable to the design of the tank and any associated roof and gives guidance on the requirements for the design of the foundation.
It is applicable where:
a) the tank is cylindrical and is mounted on a load-bearing base substantially at or above ground level;
b) the product of the tank diameter in metres and the wall height in metres lies within the range 5 to 500;
c) the tank diameter does not exceed 100 m and the total wall height does not exceed 50 m;
d) the stored material has the characteristics of a liquid, exerting a negligible frictional force on the tank wall; the stored material can be undergoing treatment as part of a municipal or industrial effluent treatment process;
e) the internal pressure in the headspace above the liquid does not exceed 50 kPa and the internal partial vacuum above the liquid does not exceed 10 kPa;
f) the walls of the tank are vertical;
g) the floor of the tank is substantially flat at its intersection with the wall; the floor of the tank can have a rise or fall built in to allow complete emptying of the tank contents, the slope of which does not exceed 1:100;
h) there is negligible inertial and impact load due to tank filling;
i) the minimum thickness of the tank shell is 1,5 mm;
j) the material used for the manufacture of the steel sheets is carbon steel (tanks constructed of sheets made from aluminium or stainless steel are outside the scope of this document);
k) the temperature of the tank wall during operation is within the range −50 °C to +100 °C under all operating conditions.
This document also gives details of procedures to be followed during installation on site and for inspection and maintenance of the installed tank.
It does not apply to chemical-reaction vessels.
It does not cover resistance to fire.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6769:2022(Main)
Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
SIST EN ISO 6769:2023

This document specifies a method of test for determining the scratch hardness of the surface of vitreous and porcelain enamels.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13807:2022(Main)
Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807:2022)
SIST EN ISO 13807:2022

This document specifies a test method for the determination of the crack formation temperature of enamels for the chemical industry by subjecting enamelled steel specimens to thermal shock using cold water.
The value of the crack formation temperature measured according to this test method does not apply to the finished component (see Annex A). It is a parameter of vitreous and porcelain enamels for comparing the relative quality of different enamel formulations.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8291:2022(Main)
Vitreous and porcelain enamels - Method of test of self-cleaning properties (ISO 8291:1986)
SIST EN ISO 8291:2022

Applies to enamelled walls of roasting devices, grills and baking devices; self-cleaning consists in the capacity first to absorb oil or fat in droplet form, and then to volatilize the greater part of the fat or oil by the sequential processes of distillation, decomposition, and combustion. Is not applicable to pyrolytically cleaning enamels.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4532:2022(Main)
Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test (ISO 4532:1991)
SIST EN ISO 4532:2022

Specifies a test method which is used as a factory production control test. The test is not intended to be used for testing the adhesion of the enamel. Annexes A and B are for information only.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2747:2022(Main)
Vitreous and porcelain enamels - Enamelled cooking utensils - Determination of resistance to thermal shock (ISO 2747:1998)
SIST EN ISO 2747:2022

This International Standard specifies a method of determining, by successive thermal shock tests, the
behaviour of vitreous and porcelain enamelled cooking utensils and similar articles under sudden
changes of temperature (resistance to thermal shock).

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4528:2022(Main)
Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2022)
SIST EN ISO 4528:2022

This document gives guidance on the selection of test methods for evaluating the performance of vitreous and porcelain enamelled finishes in different applications. This document references the test methods available for measuring the properties of these finishes and correlates these properties to the requirements of specific enamelled articles.
This document is limited for the most part to test methods in ISO documents or European standards but does not provide acceptance criteria or performance limits for the properties.
This document is applicable to all enamelled articles, irrespective of their basis metals.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4531:2022(Main)
Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO 4531:2022)
SIST EN ISO 4531:2022

This document specifies a simulating method of test for determination of the release of metal-ions from enamelled articles, which are intended to come into contact with food.
This document also specifies limits for the release of metal-ions from enamelled articles, which are intended to come into contact with food.
This document is applicable to enamelled articles, including tanks and vessels, which are intended to be used for the preparation, cooking, serving and storage of food.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6370-2:2021(Main)
Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2020)
SIST EN ISO 6370-2:2021

This document specifies a test method for determining the resistance of vitreous and porcelain enamel coatings to abrasion by rubbing, grinding or other mechanical effects.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day