Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO 4531:2022)

This document specifies a simulating method of test for determination of the release of metal-ions from enamelled articles, which are intended to come into contact with food.
This document also specifies limits for the release of metal-ions from enamelled articles, which are intended to come into contact with food.
This document is applicable to enamelled articles, including tanks and vessels, which are intended to be used for the preparation, cooking, serving and storage of food.

Emails - Freisetzung aus emaillierten Gegenständen für den Kontakt mit Lebensmitteln - Prüfverfahren und zulässige Grenzwerte (ISO 4531:2022)

Dieses Dokument legt ein Simulationsprüfverfahren zur Bestimmung der Freisetzung von Metallionen aus emaillierten Gegenständen fest, die für den Kontakt mit Lebensmitteln bestimmt sind.
Darüber hinaus legt dieses Dokument auch Grenzwerte für die Freisetzung von Metallionen aus emaillierten Gegenständen fest, die für den Kontakt mit Lebensmitteln bestimmt sind.
Dieses Dokument ist anwendbar für emaillierte Gegenstände, einschließlich Behältern und Gefäßen, die zum Zubereiten, Kochen, Servieren und Aufbewahren von Lebensmitteln bestimmt sind.

Émaux vitrifiés - Libération depuis les articles émaillés en contact avec les aliments - Méthode d'essai et limites (ISO 4531:2022)

Le présent document spécifie une méthode d’essai de simulation pour la détermination de la libération d’ions métalliques depuis les articles émaillés destinés à entrer en contact avec les denrées alimentaires.
Le présent document spécifie également les limites relatives à la libération d’ions métalliques depuis les articles émaillés destinés à entrer en contact avec les denrées alimentaires.
Le présent document est applicable aux articles émaillés, y compris réservoirs et récipients, destinés à la préparation, à la cuisson, au service et à la conservation des denrées alimentaires.

Steklasti in porcelanski emajli - Sproščanje iz emajliranih izdelkov v stiku z živili - Metode preskušanja in mejne vrednosti (ISO 4531:2022)

Ta dokument določa simulacijsko metodo preskusa za ugotavljanje sproščanja kovinskih ionov iz emajliranih izdelkov, ki pridejo v stik z živili. Določa pa tudi mejne vrednosti za sproščanje kovinskih ionov iz emajliranih izdelkov, ki pridejo v stik z živili. Ta dokument se uporablja za emajlirane izdelke, vključno s cisternami in posodami, ki se uporabljajo za pripravo, kuhanje, serviranje in shranjevanje živil.

General Information

Status
Published
Publication Date
03-May-2022
Withdrawal Date
29-Nov-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-May-2022
Due Date
18-Aug-2022
Completion Date
04-May-2022

Relations

Buy Standard

Standard
EN ISO 4531:2022 - BARVE na PDF-str 16
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 4531:2022 - BARVE
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4531:2022
01-julij-2022
Nadomešča:
SIST EN ISO 4531:2018
Steklasti in porcelanski emajli - Sproščanje iz emajliranih delcev v stiku z živili -
Metode preskušanja in mejne vrednosti (ISO 4531:2022)
Vitreous and porcelain enamels - Release from enamelled articles in contact with food -
Methods of test and limits (ISO 4531:2022)
Emails - Freisetzung aus emaillierten Gegenständen für den Kontakt mit Lebensmitteln -
Prüfverfahren und zulässige Grenzwerte (ISO 4531:2022)
Émaux vitrifiés - Libération depuis les articles émaillés en contact avec les aliments -
Méthode d'essai et limites (ISO 4531:2022)
Ta slovenski standard je istoveten z: EN ISO 4531:2022
ICS:
25.220.50 Emajlne prevleke Enamels
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
97.040.60 Kuhinjska posoda, jedilni Cookware, cutlery and
servisi in jedilni pribor flatware
SIST EN ISO 4531:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4531:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 4531:2022


EN ISO 4531
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2022
EUROPÄISCHE NORM
ICS 25.220.50; 67.250; 97.040.60 Supersedes EN ISO 4531:2018
English Version

Vitreous and porcelain enamels - Release from enamelled
articles in contact with food - Methods of test and limits
(ISO 4531:2022)
Émaux vitrifiés - Libération depuis les articles émaillés Emails - Freisetzung aus emaillierten Gegenständen für
en contact avec les aliments - Méthode d'essai et den Kontakt mit Lebensmitteln - Prüfverfahren und
limites (ISO 4531:2022) zulässige Grenzwerte (ISO 4531:2022)
This European Standard was approved by CEN on 13 April 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4531:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 4531:2022
EN ISO 4531:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 4531:2022
EN ISO 4531:2022 (E)
European foreword
This document (EN ISO 4531:2022) has been prepared by Technical Committee ISO/TC 107 "Metallic
and other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and
other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4531:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany
...

SLOVENSKI STANDARD
SIST EN ISO 4531:2022
01-julij-2022
Nadomešča:
SIST EN ISO 4531:2018
Steklasti in porcelanski emajli - Sproščanje iz emajliranih izdelkov v stiku z živili -
Metode preskušanja in mejne vrednosti (ISO 4531:2022)
Vitreous and porcelain enamels - Release from enamelled articles in contact with food -
Methods of test and limits (ISO 4531:2022)
Emails - Freisetzung aus emaillierten Gegenständen für den Kontakt mit Lebensmitteln -
Prüfverfahren und zulässige Grenzwerte (ISO 4531:2022)
Émaux vitrifiés - Libération depuis les articles émaillés en contact avec les aliments -
Méthode d'essai et limites (ISO 4531:2022)
Ta slovenski standard je istoveten z: EN ISO 4531:2022
ICS:
25.220.50 Emajlne prevleke Enamels
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
97.040.60 Kuhinjska posoda, jedilni Cookware, cutlery and
servisi in jedilni pribor flatware
SIST EN ISO 4531:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4531:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 4531:2022


EN ISO 4531
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2022
EUROPÄISCHE NORM
ICS 25.220.50; 67.250; 97.040.60 Supersedes EN ISO 4531:2018
English Version

Vitreous and porcelain enamels - Release from enamelled
articles in contact with food - Methods of test and limits
(ISO 4531:2022)
Émaux vitrifiés - Libération depuis les articles émaillés Emails - Freisetzung aus emaillierten Gegenständen für
en contact avec les aliments - Méthode d'essai et den Kontakt mit Lebensmitteln - Prüfverfahren und
limites (ISO 4531:2022) zulässige Grenzwerte (ISO 4531:2022)
This European Standard was approved by CEN on 13 April 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4531:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 4531:2022
EN ISO 4531:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 4531:2022
EN ISO 4531:2022 (E)
European foreword
This document (EN ISO 4531:2022) has been prepared by Technical Committee ISO/TC 107 "Metallic
and other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and
other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4531:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.