EN ISO 28721-2:2025
(Main)Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO 28721-2:2025)
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO 28721-2:2025)
This document specifies requirements for the resistance of chemical enamels to chemical attack and thermal shock, as well as their designation, for ordering purposes.
It is applicable to enamels used in glass-lined apparatus, piping and other components, primarily used in process equipment in chemical plants, which are applied on to low-alloy carbon steels substrates.
NOTE The main criteria for assessing enamel quality are its resistance to chemical attack and thermal shock, and the structure of the cover coat enamel.
Emails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen - Teil 2: Bezeichnung und Festlegung der chemischen und Temperaturschockbeständigkeit (ISO 28721‑2:2025)
Émaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 2: Désignation et spécifications de la résistance à l'attaque chimique et au choc thermique (ISO 28721-2:2025)
Le présent document définit les exigences relatives à la résistance des émaux chimiques à l’attaque chimique et au choc thermique ainsi que leur désignation à des fins de commande.
Il est applicable aux appareils, éléments de tuyauterie et autres composants émaillés, principalement utilisés pour l’équipement industriel dans les usines chimiques, qui sont appliqués sur des substrats en aciers au carbone faiblement alliés.
NOTE Les principaux critères pour évaluer la qualité de l’émail sont la résistance à l’attaque chimique et au choc thermique, ainsi que la structure du revêtement émaillé.
Steklasti in keramični emajli - Emajlirane naprave za procesno opremo - 2. del: Označevanje in specifikacija odpornosti proti kemični agresiji in toplotnemu udaru (ISO 28721-2:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2025
Steklasti in keramični emajli - Emajlirane naprave za procesno opremo - 2. del:
Označevanje in specifikacija odpornosti proti kemični agresiji in toplotnemu udaru
(ISO 28721-2:2025)
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2:
Designation and specification of resistance to chemical attack and thermal shock (ISO
28721-2:2025)
Emails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen -
Teil 2: Bezeichnung und Festlegung der chemischen und
Temperaturschockbeständigkeit (ISO 28721-2:2025)
Émaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 2:
Désignation et spécifications de la résistance à l'attaque chimique et au choc thermique
(ISO 28721-2:2025)
Ta slovenski standard je istoveten z: EN ISO 28721-2:2025
ICS:
25.220.50 Emajlne prevleke Enamels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 28721-2
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2025
EUROPÄISCHE NORM
ICS 25.220.50 Supersedes EN ISO 28721-2:2015
English Version
Vitreous and porcelain enamels - Glass-lined apparatus for
process plants - Part 2: Designation and specification of
resistance to chemical attack and thermal shock (ISO
28721-2:2025)
Émaux vitrifiés - Appareils émaillés pour les Emails und Emaillierungen - Emaillierte Apparate für
installations industrielles - Partie 2: Désignation et verfahrenstechnische Anlagen - Teil 2: Bezeichnung
spécifications de la résistance à l'attaque chimique et und Festlegung der chemischen und
au choc thermique (ISO 28721-2:2025) Temperaturschockbeständigkeit (ISO 28721-2:2025)
This European Standard was approved by CEN on 3 February 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28721-2:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 28721-2:2025) has been prepared by Technical Committee ISO/TC 107
"Metallic and other inorganic coatings" in collaboration with Technical Committee CEN/TC 262
“Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of
metals and alloys” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2025, and conflicting national standards shall
be withdrawn at the latest by August 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 28721-2:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 28721-2:2025 has been approved by CEN as EN ISO 28721-2:2025 without any
modification.
International
Standard
ISO 28721-2
Third edition
Vitreous and porcelain enamels —
2025-02
Glass-lined apparatus for process
plants —
Part 2:
Designation and specification of
resistance to chemical attack and
thermal shock
Émaux vitrifiés — Appareils émaillés pour les installations
industrielles —
Partie 2: Désignation et spécifications de la résistance à l'attaque
chimique et au choc thermique
Reference number
ISO 28721-2:2025(en) © ISO 2025
ISO 28721-2:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 28721-2:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Designation . 2
5 Quality requirements . 2
5.1 Rate of corrosion in hydrochloric acid .2
5.2 Rate of corrosion in sodium hydroxide solution .2
5.3 Crack formation temperature .2
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.